BOL: Related items

HiCanu: accurate assembly of segmental duplications, satellites, and allelic variants from high-fidelity long reads

BioStar — Fri, 27 Mar 2020 22:49:31 -0500

HiCanu, a significant modification of the Canu assembler designed to leverage the full potential of HiFi reads via homopolymer compression, overlap-based error correction, and aggressive false overlap filtering.

More at https://www.biorxiv.org/content/10.1101/2020.03.14.992248v3

Address of the bookmark: https://github.com/marbl/canu

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Picard

Neel — Fri, 29 Apr 2016 08:21:54 -0500

Picard is a set of command line tools for manipulating high-throughput sequencing (HTS) data and formats such as SAM/BAM/CRAM and VCF. These file formats are defined in the Hts-specs repository. See especially the SAM specification and the VCF specification.

Note that the information on this page is targeted at end-users. For developers, the source code, building instructions and implementation/development resources are available on GitHub.

The Picard toolkit is open-source under the MIT license and free for all uses.

Enjoy!

Address of the bookmark: http://broadinstitute.github.io/picard/

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

RECORD

Bulbul — Fri, 25 Nov 2016 08:23:36 -0600

Background. Next-generation sequencing technologies are now producing multiple times the genome size in total reads from a single experiment. This is enough information to reconstruct at least some of the differences between the individual genome studied in the experiment and the reference genome of the species. However, in most typical protocols, this information is disregarded and the reference genome is used. Results. We provide a new approach that allows researchers to reconstruct genomes very closely related to the reference genome (e.g., mutants of the same species) directly from the reads used in the experiment. Our approach applies de novo assembly software to experimental reads and so-called pseudoreads and uses the resulting contigs to generate a modified reference sequence. In this way, it can very quickly, and at no additional sequencing cost, generate new, modified reference sequence that is closer to the actual sequenced genome and has a full coverage. In this paper, we describe our approach and test its implementation called RECORD. We evaluate RECORD on both simulated and real data. We made our software publicly available on sourceforge. Conclusion. Our tests show that on closely related sequences RECORD outperforms more general assisted-assembly software.

More at https://sourceforge.net/projects/record-genome-assembler/files/

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pubmed/26558255

CABOG: Celera Assembler with Best Overlap Graph

Abhimanyu Singh — Mon, 15 May 2017 05:04:39 -0500

CABOG (Celera Assembler with Best Overlap Graph) is scientific software for DNA research. CABOG has been a critical component of many genome sequencing projects. CABOG operates on small genomes such as bacterial as well as large genomes such as mammalian. CABOG is an extension of the Celera Assembler software that was originally developed at Celera for the 2001 publication of the first draft human genome sequence. The software was released to the public domain in 2004. Its open source repository on Source Forge is an internet resource for scientists around the world.

CABOG is one of many software programs called genome assemblers. These programs exist to overcome the fundamental limitation of all sequencing machines, namely, that they read out very few DNA letters at a time. These programs reconstruct genomes that are billions of letters long from the hundreds of letters per read that modern sequencers provide. What these programs do is often described as a scaled up version of a family solving a jigsaw puzzle.

The CABOG software was the first to accomplish many scientific goals. It was the first to assemble the genome of a multicellular organism (Drosophila melanogaster, 2000). It was the first to assemble both parental haplotypes of one human genome (J. Craig Venter, 2007). It was the first to assemble environmental sequence from the oceans (Sargasso Sea in 2004 and Global Ocean Sampling in 2007). It was first to combine reads from first-generation Sanger sequencing machines and second-generation pyrosequencing machines (Marine microbes, 2006). Today, CABOG is one of the leading assembly programs for data sets that include paired end data from the Roche 454 line of sequencing machines.

Address of the bookmark: http://www.jcvi.org/cms/research/projects/cabog/overview/

Apollo: a sequence annotation editor

Abhimanyu Singh — Tue, 27 Aug 2019 08:08:47 -0500

The well-established inaccuracy of purely computational methods for annotating genome sequences necessitates an interactive tool to allow biological experts to refine these approximations by viewing and independently evaluating the data supporting each annotation. Apollo was developed to meet this need, enabling curators to inspect genome annotations closely and edit them

Address of the bookmark: https://genomebiology.biomedcentral.com/articles/10.1186/gb-2002-3-12-research0082

DnaSP: DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms

Neel — Wed, 25 Nov 2020 19:51:38 -0600

DnaSP, DNA Sequence Polymorphism, is a software package for the analysis of DNA polymorphisms using data from a single locus (a multiple sequence aligned -MSA data), or from several loci (a Multiple-MSA data, such as formats generated by some assembler RAD-seq software). DnaSP can estimate several measures of DNA sequence variation within and between populations in noncoding, synonymous or nonsynonymous sites, or in various sorts of codon positions), as well as linkage disequilibrium, recombination, gene flow and gene conversion parameters.

Address of the bookmark: http://www.ub.edu/dnasp/

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo