BOL: Related items

Platypus: A Haplotype-Based Variant Caller For Next Generation Sequence Data

Shruti Paniwala — Thu, 25 Oct 2018 06:14:55 -0500

Platypus is a tool designed for efficient and accurate variant-detection in high-throughput sequencing data. By using local realignment of reads and local assembly it achieves both high sensitivity and high specificity. Platypus can detect SNPs, MNPs, short indels, replacements and (using the assembly option) deletions up to several kb. It has been extensively tested on whole-genome, exon-capture, and targeted capture data, it has been run on very large datasets as part of the Thousand Genomes and WGS500 projects, and is being used in clinical sequencing trials in the Mainstreaming Cancer Genetics programme.

Tutorial https://github.com/andyrimmer/Platypus/blob/master/misc/README.txt

Address of the bookmark: http://www.well.ox.ac.uk/platypus

AfterQC: Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data

Jit — Fri, 29 Jun 2018 03:26:03 -0500

Automatic Filtering, Trimming, Error Removing and Quality Control for fastq data AfterQC can simply go through all fastq files in a folder and then output three folders: good, bad and QC folders, which contains good reads, bad reads and the QC results of each fastq file/pair. Currently it supports processing data from HiSeq 2000/2500/3000/4000, Nextseq 500/550, MiniSeq...and other Illumina 1.8 or newer formats The author has reimplemented this tool in C++ with multithreading support to make it much faster. The new tool is called fastp and can be found at: https://github.com/OpenGene/fastp . If you prefer a C++ based tool, please use fastp instead. https://github.com/OpenGene/AfterQC

Address of the bookmark: https://github.com/OpenGene/AfterQC

Manta: rapid detection of structural variants and indels for germline and cancer sequencing applications.

Jit — Mon, 28 May 2018 09:41:39 -0500

Manta calls structural variants (SVs) and indels from mapped paired-end sequencing reads. It is optimized for analysis of germline variation in small sets of individuals and somatic variation in tumor/normal sample pairs. Manta discovers, assembles and scores large-scale SVs, medium-sized indels and large insertions within a single efficient workflow.

Address of the bookmark: https://github.com/Illumina/manta

mosdepth: fast BAM/CRAM depth calculation for WGS, exome, or targeted sequencing

Jit — Wed, 13 Nov 2019 22:20:19 -0600

mosdepth can output:

per-base depth about 2x as fast samtools depth--about 25 minutes of CPU time for a 30X genome.
mean per-window depth given a window size--as would be used for CNV calling.
the mean per-region given a BED file of regions.
a distribution of proportion of bases covered at or above a given threshold for each chromosome and genome-wide.
quantized output that merges adjacent bases as long as they fall in the same coverage bins e.g. (10-20)
threshold output to indicate how many bases in each region are covered at the given thresholds.
A summary of mean depths per chromosome and within specified regions per chromosome.

Address of the bookmark: https://github.com/brentp/mosdepth

LoFreq*: A sequence-quality aware, ultra-sensitive variant caller for NGS data

BioStar — Tue, 18 Feb 2020 03:24:22 -0600

LoFreq* (i.e. LoFreq version 2) is a fast and sensitive variant-caller for inferring SNVs and indels from next-generation sequencing data. It makes full use of base-call qualities and other sources of errors inherent in sequencing (e.g. mapping or base/indel alignment uncertainty), which are usually ignored by other methods or only used for filtering.

https://github.com/CSB5/lofreq

http://csb5.github.io/lofreq/installation/

https://github.com/CSB5/lofreq/tree/master/dist

Address of the bookmark: http://csb5.github.io/lofreq/

KAT: a K-mer analysis toolkit to quality control NGS datasets and genome assemblies

Jit — Fri, 06 Jul 2018 03:36:45 -0500

KAT is a suite of tools that analyse jellyfish hashes or sequence files (fasta or fastq) using kmer counts. The following tools are currently available in KAT:

hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
- kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
- seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
- density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
- profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
- spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
- spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
- spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339

Address of the bookmark: https://github.com/TGAC/KAT

SvABA: Genome-wide detection of structural variants and indels by local assembly

Abhimanyu Singh — Mon, 21 Jan 2019 17:58:56 -0600

SvABA is a method for detecting structural variants in sequencing data using genome-wide local assembly. Under the hood, SvABA uses a custom implementation of SGA (String Graph Assembler) by Jared Simpson, and BWA-MEM by Heng Li. Contigs are assembled for every 25kb window (with some small overlap) for every region in the genome. The default is to use only clipped, discordant, unmapped and indel reads, although this can be customized to any set of reads at the command line using VariantBam rules. These contigs are then immediately aligned to the reference with BWA-MEM and parsed to identify variants. Sequencing reads are then realigned to the contigs with BWA-MEM, and variants are scored by their read support.

Address of the bookmark: https://github.com/walaj/svaba

Severus: a somatic structural variation (SV) caller for long reads

LEGE — Sun, 31 Mar 2024 02:41:27 -0500

Severus is a somatic structural variation (SV) caller for long reads (both PacBio and ONT). It is designed for matching tumor/normal analysis, supports multiple tumor samples, and produces accurate and complete somatic and germline calls. Severus takes advantage of long-read phasing and uses the breakpoint graph framework to model complex chromosomal rearrangements.

If you use Severus, please cite https://www.medrxiv.org/content/10.1101/2024.03.22.24304756v1

Address of the bookmark: https://github.com/KolmogorovLab/Severus

Indexcov: fast coverage quality control for whole-genome sequencing

Jit — Wed, 29 Aug 2018 09:20:46 -0500

indexcov, an efficient estimator of whole-genome sequencing coverage to rapidly identify samples with aberrant coverage profiles, reveal large-scale chromosomal anomalies, recognize potential batch effects, and infer the sex of a sample. Indexcov is available at https://github.com/brentp/goleft under the MIT license.

Address of the bookmark: https://github.com/brentp/goleft

GEO2R: compare two or more groups of Samples

Rahul Nayak — Sun, 20 Dec 2020 11:49:41 -0600

GEO2R to compare two or more groups of Samples in order to identify genes that are differentially expressed across experimental conditions.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/geo/geo2r/