BOL: Related items

Genobuntu: A software package containing more than 70 software and packages oriented towards NGS and genome assembly

BioStar — Tue, 11 Dec 2018 05:15:57 -0600

Genobuntu is a software package containing more than 70 software and packages oriented towards NGS. In its current version, Genobuntu supports pre assembly tools, genome assemblers as well as post assembly tools.

Commonly used biological software and example script files for different assembly pipelines have also been provided, where the example script files can be updated to suit one’s experimental needs. Genobuntu attempts to reduce the amount of time and energy needed to build software workstations and it can also act as a good teaching source for a class room setting.

https://sourceforge.net/projects/genobuntu/

Address of the bookmark: https://sourceforge.net/projects/genobuntu/

molinspiration: broad range of cheminformatics software tools supporting molecule manipulation

BioJoker — Sun, 20 Jan 2019 05:32:40 -0600

Molinspiration offers broad range of cheminformatics software tools supporting molecule manipulation and processing, including SMILES and SDfile conversion, normalization of molecules, generation of tautomers, molecule fragmentation, calculation of various molecular properties needed in QSAR, molecular modelling and drug design, high quality molecule depiction, molecular database tools supporting substructure and similarity searches. Our products support also fragment-based virtual screening, bioactivity prediction and data visualization. Molinspiration tools are written in Java, therefore can be used practically on any computer platform.

Address of the bookmark: https://www.molinspiration.com/

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

OMArk: software for proteome (protein-coding gene repertoire) quality assessment

LEGE — Wed, 21 Feb 2024 15:01:20 -0600

OMArk is a software for proteome (protein-coding gene repertoire) quality assessment. It provides measures of proteome completeness, characterizes the consistency of all protein coding genes with regard to their homologs, and identifies the presence of contamination from other species. OMArk relies on the OMA orthology database, from which it exploits orthology relationships, and on the OMAmer software for fast placement of all proteins into gene families.

Address of the bookmark: https://github.com/DessimozLab/OMArk

Des Higgins: Visualizing Multiple Sequence Alignments

Wed, 26 Feb 2014 00:50:08 -0600

Copyright Broad Institute, 2013. All rights reserved. Des Higgins (http://www.bioinf.ucd.ie) gives a very entertaining introduction to the visualization of multiple sequence alignment, and to his widely-used Clustal tool. He highlights the emerging challenge of managing alignments with a very large number of sequences, and presents several approaches to this challenge, including faster algorithms and abstract views of clusters of alignments. This talk was presented at VIZBI 2011, an international conference series on visualizing biological data (http://www.vizbi.org) funded by NIH & EMBO. For information about data visualization efforts at the Broad Institute, please visit: http://www.broadinstitute.org/node/1363/

deepTools

Martin Jones — Sat, 08 Nov 2014 15:02:08 -0600

deepTools addresses the challenge of handling the large amounts of data that are now routinely generated from DNA sequencing centers. To do so, deepTools contains useful modules to process the mapped reads data to create coverage files in standard bedGraph and bigWig file formats. By doing so, deepTools allows the creation of normalized coverage files or the comparison between two files (for example, treatment and control). Finally, using such normalized and standardized files, multiple visualizations can be created to identify enrichments with functional annotations of the genome.

Publicaton: http://nar.oxfordjournals.org/content/early/2014/05/05/nar.gku365.full

Source Code and Wiki: https://github.com/fidelram/deepTools/wiki

Galaxy Tool Shed repository: http://toolshed.g2.bx.psu.edu/view/bgruening/deeptools

and example Galaxy workflows: http://toolshed.g2.bx.psu.edu/view/bgruening/deeptools_workflows

Smash: An alignment-free method to find and visualise rearrangements between pairs of DNA sequences

Jit — Tue, 26 Apr 2016 12:18:49 -0500

Smash is a completely alignment-free method/tool to find and visualise genomic rearrangements. The detection is based on conditional exclusive compression, namely using a FCM (Markov model), of high context order (typically 20). For visualisation, Smash outputs a SVG image, with an ideogramoutput architecture, where the patterns are represented with several HSV values (only value varies). The method can perform both in small- and large-scale. Nevertheless is more directed to large-scale since that the main aim of the research is to know where the large-scale [chromosomal by chromosome] of several primates was equal/different, having at a glance a map of the entire genomes.

Address of the bookmark: http://bioinformatics.ua.pt/software/smash/

iTOL: interactive Tree Of Life

Jit — Tue, 31 Jan 2017 05:56:30 -0600

Interactive Tree Of Life is an online tool for the display and manipulation of phylogenetic trees. It provides most of the features available in other tree viewers, and offers a novel circular tree layout, which makes it easy to visualize mid-sized tree (up to several thousand leaves). Trees can be exported to several graphical formats, both bitmap and vector based.

There are several pre-computed trees available for display, including the main Tree Of Life, described in Ciccarelli, et al., 2006. In addition to the precomputed trees, users can upload and display personal trees and data, using the 'Data upload' page or through a personal user account.

Address of the bookmark: http://itol.embl.de/

PhyloGrapher - Graph Visualization Tool

Jit — Wed, 07 Mar 2018 18:11:25 -0600

PhyloGrapher is a program designed to visualize and study evolutionary relationships within families of homologous genes or proteins (elements). PhyloGrapher is a drawing tool that generates custom graphs for a given set of elements. In general, it is possible to use PhyloGrapher to visualize any type of relations between elements.

https://www.youtube.com/watch?v=WgufqYMHCvM

Address of the bookmark: http://www.atgc.org/PhyloGrapher/PhyloGrapher_Welcome.html

D3 javascript for visualization !

Jit — Mon, 23 Apr 2018 08:42:22 -0500

Welcome to the D3 gallery! More examples are available on bl.ocks.org/mbostock. If you want to share an example and don't have your own hosting, consider using Gist and bl.ocks.org. If you want to share or view live examples try vida.io.

Address of the bookmark: https://github.com/d3/d3/wiki/Gallery