BOL: Related items

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/

DADA2: Fast and accurate sample inference from amplicon data with single-nucleotide resolution

Jit — Tue, 10 Nov 2020 20:26:00 -0600

The DADA2 tutorial goes through a typical workflow for paired end Illumina Miseq data: raw amplicon sequencing data is processed into the table of exact amplicon sequence variants (ASVs) present in each sample.

The DADA2 Workflow on Big Data goes through workflow optimized to run on large datasets (10s of millions to billions of reads).

An ITS-specific version of the DADA2 workflow identifies and verifiably removes primers on both ends of each ITS read, a key step due to the variable length of the ITS region.

Short demonstrations of assigning taxonomy and assigning species to sequences.

Address of the bookmark: https://benjjneb.github.io/dada2/index.html

PuffAligner: a fast, efficient and accurate aligner based on the Pufferfish index

Rahul Nayak — Thu, 21 Apr 2022 05:41:39 -0500

PuffAligner, a fast, accurate and versatile aligner built on top of the Pufferfish index. PuffAligner is able to produce highly sensitive alignments, similar to those of Bowtie2, but much more quickly. While exhibiting similar speed to the ultrafast STAR aligner, PuffAligner requires considerably less memory to construct its index and align reads. PuffAligner strikes a desirable balance with respect to the time, space and accuracy tradeoffs made by different alignment tools and provides a promising foundation on which to test new alignment ideas over large collections of sequences.

Address of the bookmark: https://github.com/COMBINE-lab/pufferfish/tree/cigar-strings

HiTE: a fast and accurate dynamic boundary adjustment approach for full-length Transposable Elements detection and annotation in Genome Assemblies

LEGE — Sat, 20 Sep 2025 09:34:04 -0500

HiTE is a Python software that uses a dynamic boundary adjustment approach to detect and annotate full-length Transposable Elements in Genome Assemblies. In comparison to other tools, HiTE demonstrates superior performance in detecting a greater number of full-length TEs.

panHiTE

We have developed panHiTE, a comprehensive and accurate pipeline for TE detection in large-scale population genomes. It has been successfully applied to hundreds of plant population genomes, demonstrating its effectiveness and scalability.

For detailed instructions, please refer to the panHiTE tutorial.

Address of the bookmark: https://github.com/CSU-KangHu/HiTE

JASMINE: Jointly Accurate Sv Merging with Intersample Network Edges

Shruti Paniwala — Sat, 02 Jul 2022 11:41:53 -0500

This tool is used to merge structural variants (SVs) across samples. Each sample has a number of SV calls, consisting of position information (chromosome, start, end, length), type and strand information, and a number of other values. Jasmine represents the set of all SVs across samples as a network, and uses a modified minimum spanning forest algorithm to determine the best way of merging the variants such that each merged variants represents a set of analogous variants occurring in different samples.

Address of the bookmark: https://github.com/mkirsche/Jasmine

HALC: High throughput algorithm for long read error correction

Jit — Fri, 08 Jun 2018 10:47:41 -0500

HALC, a high throughput algorithm for long read error correction. HALC aligns the long reads to short read contigs from the same species with a relatively low identity requirement so that a long read region can be aligned to at least one contig region, including its true genome region’s repeats in the contigs sufficiently similar to it (similar repeat based alignment approach) HALC was able to obtain 6.7-41.1% higher throughput than the existing algorithms while maintaining comparable accuracy. The HALC corrected long reads can thus result in 11.4-60.7% longer assembled contigs than the existing algorithms.

Address of the bookmark: https://github.com/lanl001/halc

OrthoANI: An improved algorithm and software for calculating average nucleotide identity

Abhimanyu Singh — Wed, 12 Dec 2018 08:36:08 -0600

OAT uses OrthoANI to measure the overall similarity between two genome sequences. ANI and OrthoANI are comparable algorithms: they share the same species demarcation cut-off at 95~96% and large comparison studies have demonstrated both algorithms to produce near identical reciprocal similarities. Details of the OrthoANI algorithm is given in (Lee et al. 2015). OAT employs an easy-to-follow Graphical User Interface that allow researchers to calculate OrthoANI values between genomes of interest without unfamiliar Command Line Environments. Moreover, the OAT_cmd command-line software can be integrated into preexisting bioinformatics pipelines.

Address of the bookmark: https://www.ezbiocloud.net/tools/orthoani

The wavefront alignment (WFA) algorithm

BioStar — Sun, 28 Jun 2020 10:17:50 -0500

The wavefront alignment (WFA) algorithm is an exact gap-affine algorithm that takes advantage of
homologous regions between the sequences to accelerate the alignment process. As opposed to traditional dynamic programming algorithms that run in quadratic time, the WFA runs in time O(ns), proportional to the read length n and the alignment score s, using O(s^2) memory. Moreover, the WFA exhibits simple data dependencies that can be easily vectorized, even by the automatic features of modern compilers, for different architectures, without the need to adapt the code.

Address of the bookmark: https://github.com/smarco/WFA

Web Apollo: a web-based genomic annotation editing platform

Jit — Fri, 28 Jul 2017 04:48:17 -0500

Web Apollo is the first instantaneous, collaborative genomic annotation editor available on the web. One of the natural consequences following from current advances in sequencing technology is that there are more and more researchers sequencing new genomes. These researchers require tools to describe the functional features of their newly sequenced genomes. With Web Apollo researchers can use any of the common browsers (for example, Chrome or Firefox) to jointly analyze and precisely describe the features of a genome in real time, whether they are in the same room or working from opposite sides of the world.

Address of the bookmark: http://genomearchitect.github.io/

Omega2: metagenome assembly pipeline

Jit — Mon, 10 Jul 2017 05:56:07 -0500

Omega found overlaps between reads using a prefix/suffix hash table. The overlap graph of reads was simplified by removing transitive edges and trimming short branches. Unitigs were generated based on minimum cost flow analysis of the overlap graph and then merged to contigs and scaffolds using mate-pair information. In comparison with three de Bruijn graph assemblers (SOAPdenovo, IDBA-UD and MetaVelvet), Omega provided comparable overall performance on a HiSeq 100-bp dataset and superior performance on a MiSeq 300-bp dataset. In comparison with Celera on the MiSeq dataset, Omega provided more continuous assemblies overall using a fraction of the computing time of existing overlap-layout-consensus assemblers. This indicates Omega can more efficiently assemble longer Illumina reads, and at deeper coverage, for metagenomic datasets.

Address of the bookmark: http://omega.omicsbio.org/