At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Address of the bookmark: https://cloud.google.com/genomics/

Address of the bookmark: https://ics.hutton.ac.uk/strudel/

Tutorial at http://evomics.org/learning/genomics/satsuma/

Address of the bookmark: http://satsuma.sourceforge.net/

Python is a very simple language, and has a very straightforward syntax. The simplest directive in Python is the "print" directive - it simply prints out a line (and also includes a newline).

Create a file Hello.py

print("Hello, Python World !.")

Run

python3 Hello.py

More at https://sourceforge.net/projects/sb2nhri/files/MyPro/

Address of the bookmark: http://www.sciencedirect.com/science/article/pii/S0167701215001207

Address of the bookmark: https://github.com/nextgenusfs/funannotate

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume.  NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

Address of the bookmark: http://mitos.bioinf.uni-leipzig.de/index.py

Following are the genome assembly tools based on string graph:

1.SGA (String Graph Assembler) https://github.com/jts/sga

Assembles large genomes from high coverage short read data. SGA is designed as a modular set of programs, which are used to form an assembly pipeline. SGA implements a set of assembly algorithms based on the FM-index. As the FM-index is a compressed data structure, the algorithms are very memory efficient. The SGA assembly has three distinct phases. The first phase corrects base calling errors in the reads. The second phase assembles contigs from the corrected reads. The third phase uses paired end and/or mate pair data to build scaffolds from the contigs. The output of this software is a PDF report that allows the properties of the genome and data quality to be visually explored. By providing more information to the user at the start of an assembly project, this software will help increase awareness of the factors that make a given assembly easy or difficult, assist in the selection of software and parameters and help to troubleshoot an assembly if it runs into problems.

2. SAGE: String-overlap Assembly of GEnomes https://github.com/lucian-ilie/SAGE2

SAGE, for de novo genome assembly. As opposed to most assemblers, which are de Bruijn graph based, SAGE uses the string-overlap graph. SAGE builds upon great existing work on string-overlap graph and maximum likelihood assembly, bringing an important number of new ideas, such as the efficient computation of the transitive reduction of the string overlap graph, the use of (generalized) edge multiplicity statistics for more accurate estimation of read copy counts, and the improved use of mate pairs and min-cost flow for supporting edge merging. The assemblies produced by SAGE for several short and medium-size genomes compared favourably with those of existing leading assemblers.

3. FSG: Fast String Graph

The new integrated assembler has been assessed on a standard benchmark, showing that fast string graph (FSG) is significantly faster than SGA while maintaining a moderate use of main memory, and showing practical advantages in running FSG on multiple threads. Moreover, we have studied the effect of coverage rates on the running times.

4.  BASE https://github.com/dhlbh/BASE

It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs. BASE is a practically efficient tool for constructing contig, with significant improvement in quality for long NGS reads. It is relatively easy to extend BASE to include scaffolding.

5. Fermi https://github.com/lh3/fermi/

Fermi is a de novo assembler with a particular focus on assembling Illumina short sequence reads from a mammal-sized genome. In addition to the role of a typical assembler, fermi also aims to preserve heterozygotes which are often collapsed by other assemblers. Its ultimate goal is to find a minimal set of unitigs to represent all the information in raw reads.

If you want to learn about String Graph assembler, please read the following papers -

i) The Fragment Assembly String Graph - E. W. Myers

This paper describes the String Graph concept.

ii) Efficient construction of an assembly string graph using the FM-index - Jared T. Simpson and Richard Durbin

This earlier paper from Simpson and Durbin

iii) Efficient de novo assembly of large genomes using compressed data structures - Jared T. Simpson and Richard Durbin