BOL: Related items

MetaEuk - sensitive, high-throughput gene discovery and annotation for large-scale eukaryotic metagenomics

Jit — Wed, 13 Jan 2021 19:29:32 -0600

MetaEuk is a modular toolkit designed for large-scale gene discovery and annotation in eukaryotic metagenomic contigs. Metaeuk combines the fast and sensitive homology search capabilities of MMseqs2 with a dynamic programming procedure to recover optimal exons sets. It reduces redundancies in multiple discoveries of the same gene and resolves conflicting gene predictions on the same strand. MetaEuk is GPL-licensed open source software that is implemented in C++ and available for Linux and macOS. The software is designed to run on multiple cores.

Address of the bookmark: https://github.com/soedinglab/metaeuk

CrowdGO: Machine learning and semantic similarity guided consensus Gene Ontology annotation

Shruti Paniwala — Thu, 26 May 2022 00:59:49 -0500

CrowdGO is a protein Gene Ontology predictor using a meta approach, analyzing the predictions of other tools in order to get an improved precision and recall.

Please note that the CrowdGO snakemake workflow is currently only tested on Ubuntu. It should work on OSX, but please report any errors to maarten.reijnders@unil.ch or create an issue.

https://journals.plos.org/ploscompbiol/article?id=10.1371/journal.pcbi.1010075

Address of the bookmark: https://gitlab.com/mreijnders/crowdgo

Omega2: metagenome assembly pipeline

Jit — Mon, 10 Jul 2017 05:56:07 -0500

Omega found overlaps between reads using a prefix/suffix hash table. The overlap graph of reads was simplified by removing transitive edges and trimming short branches. Unitigs were generated based on minimum cost flow analysis of the overlap graph and then merged to contigs and scaffolds using mate-pair information. In comparison with three de Bruijn graph assemblers (SOAPdenovo, IDBA-UD and MetaVelvet), Omega provided comparable overall performance on a HiSeq 100-bp dataset and superior performance on a MiSeq 300-bp dataset. In comparison with Celera on the MiSeq dataset, Omega provided more continuous assemblies overall using a fraction of the computing time of existing overlap-layout-consensus assemblers. This indicates Omega can more efficiently assemble longer Illumina reads, and at deeper coverage, for metagenomic datasets.

Address of the bookmark: http://omega.omicsbio.org/

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

wtdbg2: A fuzzy Bruijn graph approach to long noisy reads assembly

BioStar — Mon, 04 Feb 2019 04:53:47 -0600

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output.

./wtdbg2 -x rs -g 4.6m -t 16 -i reads.fa.gz -fo prefix
./wtpoa-cns -t 16 -i prefix.ctg.lay.gz -fo prefix.ctg.fa

Address of the bookmark: https://github.com/ruanjue/wtdbg2

TRITEX sequence assembly pipeline for Triticeae genomes

Jit — Tue, 20 Aug 2019 09:47:14 -0500

The pipeline is open-source and hosted in a public Bitbucket repository.

TRITEX has been run on highly inbred genotypes of barley (Hordeum vulgare), tetraploid wheat (Triticum turgidum) and hexaploid wheat (T. aestivum) with reasonable results: super-scaffold N50 values in the range of dozens of Mb and pseudomolecules with better gene space representation than a BAC-by-BAC assembly. It has never been tested and is not expected to work on heterozygous or autopolyploid genomes.

A protocol for generating chromosome-conformation capture sequencing (Hi-C) data suitable for use with the pipeline is described in Himmelbach et al. 2018. Refer to the technical notes of 10X Genomics on how to generate Chromium data.

Address of the bookmark: https://tritexassembly.bitbucket.io/

HiCanu: accurate assembly of segmental duplications, satellites, and allelic variants from high-fidelity long reads

BioStar — Fri, 27 Mar 2020 22:49:31 -0500

HiCanu, a significant modification of the Canu assembler designed to leverage the full potential of HiFi reads via homopolymer compression, overlap-based error correction, and aggressive false overlap filtering.

More at https://www.biorxiv.org/content/10.1101/2020.03.14.992248v3

Address of the bookmark: https://github.com/marbl/canu

Supernova: generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Jit — Sun, 31 May 2020 01:59:30 -0500

Supernova generates phased, whole-genome de novo assemblies from a Chromium-prepared library.

Please see Achieving Success with De Novo Assembly and System Requirements before creating your Chromium libraries for assembly.

Supernova should be run using 38-56x coverage of the genome.
• Somewhat higher coverage is sometimes advantageous.
• Supernova will exit if it finds that coverage is far from the recommended range.
• Note that at most 2.14 billion reads are allowed.
• Please note that we have not extensively tested genomes larger than human, and any genome above approximately 4 GB should be considered experimental and is not supported.

Address of the bookmark: https://support.10xgenomics.com/de-novo-assembly/software/pipelines/latest/using/running

Spades tutorial PDF

Abhimanyu Singh — Tue, 01 Feb 2022 04:56:43 -0600

SPAdes—St. Petersburg genome Assembler—was originally developed for de novo assembly of genome sequencing data produced for cultivated microbial isolates and for single-cell genomic DNA sequencing. With time, the functionality of SPAdes was extended to enable assembly of IonTorrent data, as well as hybrid assembly from short and long reads (PacBio and Oxford Nanopore). In this article we present protocols for five different assembly pipelines that comprise the SPAdes package and that are used for assembly of metagenomes and transcriptomes as well as assembly of putative plasmids and biosynthetic gene clusters from whole-genome sequencing and metagenomic datasets.