BOL: Related items

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

EAGLER: a scaffolding tool for long reads.

Jit — Mon, 04 Jun 2018 05:26:03 -0500

EAGLER is a scaffolding tool for long reads. The scaffolder takes as input a draft genome created by any NGS assembler and a set of long reads. The long reads are used to extend the contigs present in the NGS draft and possibly join overlapping contigs. EAGLER supports both PacBio and Oxford Nanopore reads.

The tool should be compatible with most UNIX flavors and has been successfully tested on the following operating systems:

Mac OS X 10.11.1
Mac OS X 10.10.3
Ubuntu 14.04 LTS

https://bib.irb.hr/datoteka/844447.Diplomski_2015_Luka_terbi.pdf

Address of the bookmark: https://github.com/mculinovic/EAGLER

wtdbg2: A fuzzy Bruijn graph approach to long noisy reads assembly

BioStar — Mon, 04 Feb 2019 04:53:47 -0600

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output.

./wtdbg2 -x rs -g 4.6m -t 16 -i reads.fa.gz -fo prefix
./wtpoa-cns -t 16 -i prefix.ctg.lay.gz -fo prefix.ctg.fa

Address of the bookmark: https://github.com/ruanjue/wtdbg2

HASLR: a tool for rapid genome assembly of long sequencing reads

LEGE — Fri, 31 Jan 2020 05:50:15 -0600

HASLR is a tool for rapid genome assembly of long sequencing reads. HASLR is a hybrid tool which means it requires long reads generated by Third Generation Sequencing technologies (such as PacBio or Oxford Nanopore) together with Next Generation Sequencing reads (such as Illumina) from the same sample.

Address of the bookmark: https://github.com/vpc-ccg/haslr

LRCstats: a tool for evaluating long reads correction methods

Aaryan Lokwani — Wed, 22 Aug 2018 11:05:04 -0500

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Address of the bookmark: https://github.com/cchauve/lrcstats

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

HairSplitter: assembling long reads in an unknown number of haplotypes

BioStar — Wed, 07 Dec 2022 00:13:40 -0600

Pros and cons of HairSplitter Limitations of HairSplitter:

Not very fast: it re-polishes the whole assembly

Limited in the number of haplotypes

Strengths of HairSplitter:

Very modular, can be used with any assembler

Naive: makes no assumption on ploidy, parameter-free

Safe: won’t artificially duplicate contigs

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

Not really available yet (github.com/RolandFaure/HairSplitter)

https://hal.archives-ouvertes.fr/hal-03864075/file/RolandFaure_presentation_SeqBIM_2022.pdf

Address of the bookmark: https://hal.archives-ouvertes.fr/hal-03817928/document