BOL: Related items

LSC: Improving PacBio Long Read Accuracy by Short Read Alignment

Abhimanyu Singh — Thu, 06 Sep 2018 16:27:35 -0500

Added Command line argument support.
Multi-stage execution modes.
Support for parallelization. Now execution proceeds in batches of long reads the size of which can be set by --long_read_batch_size N.
Better compressed intermediate files.
Added utilities folder.
Added support for multiple short read files.
Removed use of configuration file.

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/LSC/

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

BlasR Mapping single molecule sequencing reads using Basic Local Alignment with Successive Refinement (BLASR): Theory and Application,

Jit — Wed, 23 May 2018 06:54:32 -0500

BLASR (Basic Local Alignment with Successive Refinement) for mapping Single Molecule Sequencing (SMS) reads that are thousands to tens of thousands of bases long with divergence between the read and genome dominated by insertion and deletion error.

Here is how I use the blasr to align PacBio reads to the contigs (target.fasta). The “target.fasta.sa” is the suffix array from “target.fasta” generated by sawriter.

blasr query.fa ./target.fasta -sa ./target.fasta.sa -bestn 40 -maxScore -500 -m 4 -nproc 24 -out target.m4 -maxLCPLength 15

the output format option “-m 4″ generate the alignment coordinate. Not fully documented, but I can explain that to you.

I use a 24 cores / 48G ram server for the alignment. It took about 2 to 3 hours aligning 3G PacBio Reads to 10^6 sequences of short read contigs with a mean 3.5kbp length.

Address of the bookmark: http://bix.ucsd.edu/projects/blasr/

Breakpointer: using local mapping artifacts to support sequence breakpoint discovery from single-end reads

Jit — Tue, 12 Jun 2018 12:41:10 -0500

Breakpointer is a fast tool for locating sequence breakpoints from the alignment of single end reads (SE) produced by next generation sequencing (NGS). It adopts a heuristic method in searching for local mapping signatures created by insertion/deletions (indels) or more complex structural variants(SVs).

Address of the bookmark: https://github.com/ruping/Breakpointer

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

BioStar — Fri, 21 Sep 2018 10:19:52 -0500

Development packages for zlib and libbz2 are needed, as well as a standard compiler environment. On Ubuntu, this can be installed via:

sudo apt-get install build-essential libtool automake zlib1g-dev libbz2-dev pkg-config

On MacOS, the Apple Developer tools and Fink (or MacPorts or Brew) must be installed, then:

sudo fink install bzip2-dev pkgconfig

Address of the bookmark: https://github.com/neufeld/pandaseq

KAD: Assessing genome assemblies using K-mer copies in assemblies and K-mer abundance in Illumina reads

Jit — Fri, 19 Jun 2020 07:34:12 -0500

KAD is designed for evaluating the accuracy of nucleotide base quality of genome assemblies. Briefly, abundance of k-mers are quantified for both sequencing reads and assembly sequences. Comparison of the two values results in a single value per k-mer, K-mer Abundance Difference (KAD), which indicates how well the assembly matches read data for each k-mer.

where, c is the count of a k-mer from reads, m is the mode of counts of read k-mers, and n is the copy of the k-mer in the assembly.

Address of the bookmark: https://github.com/liu3zhenlab/KAD

FastProNGS: fast preprocessing of next-generation sequencing reads

Rahul Nayak — Sat, 26 Dec 2020 08:35:21 -0600

FastProNGS to integrate the quality control process with automatic adapter removal. Parallel processing was implemented to speed up the process by allocating multiple threads. Compared with similar up-to-date preprocessing tools, FastProNGS is by far the fastest.

Address of the bookmark: https://github.com/Megagenomics/FastProNGS

Steps to find palindrome in genomes !

BioStar — Thu, 09 Mar 2023 02:56:54 -0600

Palindromes are sequences of nucleotides that read the same backward as forward. They can be present in genomes and have various biological functions. Here are some methods for discovering palindromes in genomes:

Direct sequence search: One of the simplest ways to discover palindromes is to search the genome sequence directly for palindromic sequences using pattern matching tools, such as regular expressions or string algorithms. This approach can be useful for discovering simple palindromes, but may miss more complex palindromic structures.
Dot plot analysis: Dot plot analysis is a graphical method that can be used to identify palindromic regions in a genome. It involves plotting the genome sequence against itself and examining the diagonal patterns that emerge. Palindromic regions will appear as symmetrical patterns along the diagonal.
Restriction enzyme analysis: Some restriction enzymes, such as EcoRI and HindIII, recognize palindromic sequences and cleave DNA at these sites. By digesting the genome with these enzymes and examining the resulting fragments, palindromic regions can be identified.
Next-generation sequencing: High-throughput sequencing technologies, such as PacBio and Oxford Nanopore, can generate long reads that can span entire palindromic regions. By mapping these reads to the genome, palindromic regions can be identified and characterized.
Comparative genomics: Comparing the genomes of related species can also reveal palindromic regions that are conserved across evolutionarily divergent lineages. This approach can help identify functional palindromes that are under selective pressure.

Overall, the discovery of palindromic sequences in genomes can be accomplished using a variety of methods, each with their own advantages and limitations. A combination of these methods can provide a comprehensive understanding of the palindromic landscape of a genome.

mrFAST: Micro Read Fast Alignment Search Tool

Neel — Tue, 26 Apr 2016 03:50:06 -0500

mrFAST is a read mapper that is designed to map short reads to reference genome with a special emphasis on the discovery of structural variation and segmental duplications. mrFAST maps short reads with respect to user defined error threshold, including indels up to 4+4 bp. This manual, describes how to choose the parameters and tune mrFAST with respect to the library settings. mrFAST is designed to find 'all' mappings for a given set of reads, however it can return one "best" map location if the relevant parameter is invoked.

More at http://mrfast.sourceforge.net/manual.html

Address of the bookmark: http://mrfast.sourceforge.net/manual.html