BOL: Related items

Rebaler: program for conducting reference-based assemblies using long reads.

Jit — Tue, 18 Sep 2018 07:52:41 -0500

Rebaler is a program for conducting reference-based assemblies using long reads. It relies mainly on minimap2 for alignment and Racon for making consensus sequences.

I made Rebaler for bacterial genomes (specifically for the task of testing basecallers). It should in principle work for non-bacterial genomes as well, but I haven't tested it.

Address of the bookmark: https://github.com/rrwick/Rebaler

AlignGraph2: similar genome-assisted reassembly pipeline for PacBio long reads

Rahul Nayak — Sun, 14 Mar 2021 09:42:47 -0500

AlignGraph2 is the second version of AlignGraph for PacBio long reads. It extends and refines contigs assembled from the long reads with a published genome similar to the sequencing genome.

More at https://academic.oup.com/bib/advance-article-abstract/doi/10.1093/bib/bbab022/6146772

Address of the bookmark: https://github.com/huangs001/AlignGraph2

LoRDEC: a hybrid error correction program for long, PacBio reads

Jit — Mon, 10 Apr 2017 04:16:09 -0500

LoRDEC is a program to correct sequencing errors in long reads from 3rd generation sequencing with high error rate, and is especially intended for PacBio reads. It uses a hybrid strategy, meaning that it uses two sets of reads: the reference read set, whose error rate is assumed to be small, and the PacBio read set, which is then corrected using the reference set. Typically, the reference set contains Illumina reads.

Usually, errors in PacBio reads include many insertions and deletions, and comparatively less substitutions. LoRDEC can correct errors of all these types.
After correction, a larger portion of the sequence of PacBio reads is usable for detection of region of similarity with other sequences, for aligning them to the contigs of an assembly, etc.

Why is LoRDEC different?

It is efficient and can process large read data sets, included from eukaryotic or vertebrate species, on a usual computing server, and even works on desktop/laptop computers.
It adopts a novel graph based approach: it builds a succinct De Bruijn Graph (DBG) representing the short reads, and seeks a corrective sequence for each erroneous region of a long read by traversing chosen paths in the graph.

Address of the bookmark: http://www.atgc-montpellier.fr/lordec/

SViper: Swipe your Structural Variants called on long (ONT/PacBio) reads with short exact (Illumina) reads.

Neel — Sun, 22 Dec 2019 03:48:28 -0600

Call sviper

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants

This will output a polished_variants.vcf file, that contains all the refined variants.

Sometimes it is helpful to look at the polished sequence, e.g. with the IGV browser. In that case you want SViper to output the polished and aligned sequences in a bam file via the option --output-polished-bam:

~$ ./sviper -s short-reads.bam -l long-reads.bam -r ref.fa -c variants.vcf -o polished_variants --output-polished-bam

Address of the bookmark: https://github.com/smehringer/SViper

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

P_RNA_scaffolder: a fast and accurate genome scaffolder using paired-end RNA-sequencing reads

BioStar — Fri, 07 Sep 2018 05:19:06 -0500

P_RNA_scaffolder is a novel scaffolding tool using Pair-end RNA-seq to scaffold genome fragments. The method is suitable for most genomes. The program could utilize Illumina Paired-end RNA-sequencing reads from target speciesies. Our method provides another practical alternative to existing mate-pair_based approaches or other Protein-based approaches (for instance, PEP_scaffolder ) for scaffolding genome sequences. The most important feature of this method is to improve the completeness of gene regions and long-coding gene regions (for instance, circRNA).

Address of the bookmark: http://www.fishbrowser.org/software/P_RNA_scaffolder/#

Apollo: A Sequencing-Technology-Independent, Scalable, and Accurate Assembly Polishing Algorithm

BioStar — Mon, 16 Mar 2020 10:09:26 -0500

Apollo is an assembly polishing algorithm that attempts to correct the errors in an assembly. It can take multiple set of reads in a single run and polish the assemblies of genomes of any size. Described by Firtina et al. (preliminary version at https://arxiv.org/pdf/1902.04341.pdf

More at https://academic.oup.com/bioinformatics/advance-article/doi/10.1093/bioinformatics/btaa179/5804978?rss=1

Address of the bookmark: https://github.com/CMU-SAFARI/Apollo

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

SvABA: Genome-wide detection of structural variants and indels by local assembly

Abhimanyu Singh — Mon, 21 Jan 2019 17:58:56 -0600

SvABA is a method for detecting structural variants in sequencing data using genome-wide local assembly. Under the hood, SvABA uses a custom implementation of SGA (String Graph Assembler) by Jared Simpson, and BWA-MEM by Heng Li. Contigs are assembled for every 25kb window (with some small overlap) for every region in the genome. The default is to use only clipped, discordant, unmapped and indel reads, although this can be customized to any set of reads at the command line using VariantBam rules. These contigs are then immediately aligned to the reference with BWA-MEM and parsed to identify variants. Sequencing reads are then realigned to the contigs with BWA-MEM, and variants are scored by their read support.

Address of the bookmark: https://github.com/walaj/svaba

Free Genomics data !

BioStar — Fri, 07 Feb 2020 14:08:31 -0600

The specimens were collected by the Oxford Wytham Woods and Edinburgh Lohse lab teams. DNA extraction and sequencing was carried out by the Sanger Institute Scientific Operations teams. Assemblies were carried out by the Tree of Life team (Shane McCarthy) and colleagues in Pacific Biosciences (Jonas Korlach).

https://www.darwintreeoflife.org/an-initial-set-of-raw-genome-assemblies-from-the-darwin-tree-of-life-project/

Address of the bookmark: https://www.darwintreeoflife.org/an-initial-set-of-raw-genome-assemblies-from-the-darwin-tree-of-life-project/