BOL: Related items

mixtureS: a novel tool for bacterial strain reconstruction from reads

BioStar — Fri, 21 Aug 2020 08:23:19 -0500

mixtureS that can de novo identify bacterial strains from shotgun reads of a clonal or metagenomic sample, without prior knowledge about the strains and their variations. Tested on 243 simulated datasets and 195 experimental datasets, mixtureS reliably identified the strains, their numbers and their abundance. Compared with three tools, mixtureS showed better performance in almost all simulated datasets and the vast majority of experimental datasets.

Availability

The source code and tool mixtureS is available at http://www.cs.ucf.edu/˜xiaoman/mixtureS/.

Address of the bookmark: http://www.cs.ucf.edu/~xiaoman/mixtureS/

Bioinformatics tools for telomere to telomere assembly !

BioStar — Tue, 17 Aug 2021 13:17:09 -0500

● Merfin – k-mer-based assembly and variant calling evaluation for improved consensus accuracy (Arang Rhie)
● PanGenie – algorithm that leverages a pangenome reference built from haplotype-resolved genome assemblies in conjunction with k-mer count information from raw, short-read sequencing data to genotype a wide spectrum of genetic variation (Tobias Marschall)
● SQANTI3 – an automated pipeline for the classification of long-read transcripts that can assess the quality of data and the preprocessing pipeline (Rocío Amorín de Hegedüs @rocioadh)
● tama (Transcriptome Annotation by Modular Algorithms) – software designed for processing Iso-Seq data and other long-read transcriptome data (Richard Kuo @GenomeRIK)
● pbaa (PacBio Amplicon Analysis) – separates complex mixtures of amplicon targets from genomic samples to cluster and generate high-quality consensus sequences from HiFi reads (Zev Kronenberg @zevkronenberg)
● bellerophon – analyzes MHC typing and other low-complexity gene amplicon data; performs allele calling while detecting polymorphic sites within the sequences and removing potential chimeric sequence variants (Yuanyuan Cheng @Yuanyuan929)
● svpack – tools for filtering, comparing, and annotating structural variant (SV) calls in VCF format (Aaron Wenger)
● JumboDB – tool for de Bruijn graph construction (Anton Bankevich @AntonBankevich)
● uLTRA – tool for splice alignment of long transcriptomic reads to a genome, guided by a database of exon annotations. (Kristoffer Sahlin @krsahlin)
● LeafGo – workflow to rapidly produce high-quality de novo plant genomes (Luca Ermini @ermini_luca)

Reference:

https://www.pacb.com/blog/young-investigators-share-stellar-science-career-advice-and-bioinformatics-tools-at-smrt-leiden-2021/

Trimmomatic: A flexible read trimming tool for Illumina NGS data

Jit — Fri, 15 Apr 2016 05:58:53 -0500

Paired End:

java -jar trimmomatic-0.35.jar PE -phred33 input_forward.fq.gz input_reverse.fq.gz output_forward_paired.fq.gz output_forward_unpaired.fq.gz output_reverse_paired.fq.gz output_reverse_unpaired.fq.gz ILLUMINACLIP:TruSeq3-PE.fa:2:30:10 LEADING:3 TRAILING:3 SLIDINGWINDOW:4:15 MINLEN:36

This will perform the following:

Remove adapters (ILLUMINACLIP:TruSeq3-PE.fa:2:30:10)
Remove leading low quality or N bases (below quality 3) (LEADING:3)
Remove trailing low quality or N bases (below quality 3) (TRAILING:3)
Scan the read with a 4-base wide sliding window, cutting when the average quality per base drops below 15 (SLIDINGWINDOW:4:15)
Drop reads below the 36 bases long (MINLEN:36)

More at http://www.usadellab.org/cms/?page=trimmomatic

Address of the bookmark: http://www.usadellab.org/cms/?page=trimmomatic

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

QuorUM: An Error Corrector for Illumina Reads

Jit — Wed, 08 Nov 2017 11:40:41 -0600

Illumina Sequencing data can provide high coverage of a genome by relatively short (most often 100 bp to 150 bp) reads at a low cost. Even with low (advertised 1%) error rate, 100 × coverage Illumina data on average has an error in some read at every base in the genome. These errors make handling the data more complicated because they result in a large number of low-count erroneous k-mers in the reads. However, there is enough information in the reads to correct most of the sequencing errors, thus making subsequent use of the data (e.g. for mapping or assembly) easier. Here we use the term “error correction” to denote the reduction in errors due to both changes in individual bases and trimming of unusable sequence. We developed an error correction software called QuorUM. QuorUM is mainly aimed at error correcting Illumina reads for subsequent assembly. It is designed around the novel idea of minimizing the number of distinct erroneous k-mers in the output reads and preserving the most true k-mers, and we introduce a composite statistic π that measures how successful we are at achieving this dual goal. We evaluate the performance of QuorUM by correcting actual Illumina reads from genomes for which a reference assembly is available.

QuorUM is distributed as an independent software package and as a module of the MaSuRCA assembly software. Both are available under the GPL open source license at http://www.genome.umd.edu.

Address of the bookmark: http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0130821

Common steps for reads mapping !

BioStar — Thu, 09 Mar 2023 02:48:02 -0600

Mapping reads to a reference genome is an essential step in many types of genomic analysis, such as variant calling and gene expression analysis. Here are some general steps to follow for mapping reads to a genome:

Choose a read mapper: There are many read mappers available, such as BWA, Bowtie, and HISAT2. Choose a mapper that is appropriate for your type of data and research question.
Index the reference genome: Before mapping reads, the reference genome needs to be indexed. This involves creating an index of the genome sequence that allows the mapper to quickly find matches to the reads. Most mappers have their own indexing tools.
Prepare the read data: The reads should be in a format that is compatible with the mapper. Most mappers accept FASTQ or BAM files. Depending on the quality of the data, it may need to be filtered or trimmed before mapping.
Run the mapper: The mapper is run with the command-line interface or using a graphical user interface. The specific command depends on the mapper being used, but typically involves specifying the input data, reference genome, and output file format.
Evaluate the mapping results: After the mapping is complete, the results should be evaluated. This includes assessing the quality of the mapping, such as the mapping rate, the number of mapped reads, and the mapping quality score.
Post-processing: Depending on the analysis being performed, post-processing of the mapped reads may be necessary. This can include filtering reads based on quality, removing duplicate reads, and calling variants.

Overall, mapping reads to a reference genome is a complex process that requires careful consideration of the type of data, the research question, and the specific mapper being used.

Comparison of Short Read De Novo Alignment Algorithms

Rahul Agarwal — Wed, 21 Aug 2013 07:56:01 -0500

Excellent article to introduce different sequencing methods along with tools for de novo assembly of sequencing reads and their relevant references.

Title: Comparison of Short Read De Novo Alignment Algorithms

Author: Nikhil Gopal

Address of the bookmark: http://biochem218.stanford.edu/Projects%202011/Gopal%202011.pdf

3d-dna: 3D de novo assembly (3D DNA) pipeline

Jit — Thu, 28 Dec 2017 10:09:37 -0600

This code is designed to enable anyone to reproduce the Hs2-HiC and the AaegL4 genomes reported in: Dudchenko et al., De novo assembly of the Aedes aegypti genome using Hi-C yields chromosome-length scaffolds. Science, 2017.

Unless otherwise noted, all terminology below is consistent with this paper, and all references to figures and tables in this readme refer to this paper. Specifically, some of the terminology used below is outlined in Figure S2. The assembly procedure is described in detail in the Supporting Online Materials, specifically in the section labelled “Pipeline description”.

In addition, the pipeline uses tools and methods from Juicer (Durand & Shamim et al., Cell Systems, 2016) and Juicebox (Durand & Robinson et al., Cell Systems, 2016), as well as additional dependencies noted below.

Feel free to post your questions and comments at: http://www.aidenlab.org/forum.html

http://aidenlab.org/documentation.html

Address of the bookmark: https://github.com/theaidenlab/3d-dna

PERGA: A Paired-End Read Guided De Novo Assembler for Extending Contigs Using SVM and Look Ahead Approach

Rahul Nayak — Tue, 05 Jun 2018 09:57:11 -0500

PERGA - Paired End Reads Guided Assembler PERGA is a novel sequence reads guided de novo assembly approach which adopts greedy-like prediction strategy for assembling reads to contigs and scaffolds. Instead of using single-end reads to construct contig, PERGA uses paired-end reads and different read overlap sizes from O ≥ Omax to Omin to resolve the gaps and branches. Moreover, by constructing a decision model using machine learning approach based on branch features, PERGA can determine the correct extension in 99.7% of cases. PERGA will try to extend the contigs by all feasible nucleotides and determine if these multiple extensions due to sequencing errors or repeats by using looking ahead technology, and it also try to separate the different repeats of nearby genomic regions to make the assembly result more longer and accurate. The simulated E.coli paired-end reads data are generated using GemSim (KE McElroy, F Luciani, T Thomas. Gemsim: General, Error-Model Based Simulator of Next-Generation Sequencing Data. BMC Genomics 2012, 13:74), with coverage 50x, 60x, 100x, read lengths 100-bp, and can be downloaded from https://github.com/zhuxiao/data_PERGA.

Address of the bookmark: https://github.com/hitbio/PERGA