BOL: Related items

MECAT: fast mapping, error correction, and de novo assembly for single-molecule sequencing reads

Rahul Nayak — Fri, 11 May 2018 05:07:45 -0500

MECAT is an ultra-fast Mapping, Error Correction and de novo Assembly Tools for single molecula sequencing (SMRT) reads. MECAT employs novel alignment and error correction algorithms that are much more efficient than the state of art of aligners and error correction tools. MECAT can be used for effectively de novo assemblying large genomes. For example, on a 32-thread computer with 2.0 GHz CPU , MECAT takes 9.5 days to assemble a human genome based on 54x SMRT data, which is 40 times faster than the current PBcR-Mhap pipeline. MECAT performance were compared with PBcR-Mhap pipeline, FALCON and Canu(v1.3) in five real datasets. The quality of assembled contigs produced by MECAT is the same or better than that of the PBcR-Mhap pipeline and FALCON.

https://www.nature.com/articles/nmeth.4432

Address of the bookmark: https://github.com/xiaochuanle/MECAT

FinisherSC:a repeat-aware tool for upgrading de novo assembly using long reads

Jit — Mon, 20 Aug 2018 04:08:50 -0500

Here is the command to run the tool:

python finisherSC.py destinedFolder mummerPath

If you are running on server computer and would like to use multiple threads, then the following commands can generate 20 threads to run FinisherSC.

python finisherSC.py -par 20 destinedFolder mummerPath

Sometimes, if the names of raw reads and contigs consists of special characters/formats, FinisherSC/MUMmer may not parse them correctly. In that case, you want to have a quick renaming of the names of contigs/reads in contigs.fasta or raw_reads.fasta using the following command.

    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' raw_reads.fasta > newRaw_reads.fasta
    cp newRaw_reads.fasta raw_reads.fasta
    perl -pe 's/>[^\$]*$/">Seg" . ++$n ."\n"/ge' contigs.fasta > newContigs.fasta
    cp newContigs.fasta contigs.fasta

Address of the bookmark: https://github.com/kakitone/finishingTool

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

BioJoker — Tue, 02 Apr 2019 21:54:55 -0500

Flye is a de novo assembler for single molecule sequencing reads, such as those produced by PacBio and Oxford Nanopore Technologies. It is designed for a wide range of datasets, from small bacterial projects to large mammalian-scale assemblies. The package represents a complete pipeline: it takes raw PB / ONT reads as input and outputs polished contigs. Flye also includes a special mode for metagenome assembly.

Address of the bookmark: https://github.com/fenderglass/Flye

3D de novo assembly (3D DNA) pipeline

Jit — Sun, 02 Feb 2020 13:41:55 -0600

For a detailed description of the pipeline and how it integrates with other tools designed by the Aiden Lab see Genome Assembly Cookbook on http://aidenlab.org/assembly.

For the original version of the pipeline and to reproduce the Hs2-HiC and the AaegL4 genomes reported in (Dudchenko et al., Science, 2017) see the original commit.

For the detailed description of the merge section see https://github.com/theaidenlab/AGWG-merge.

Address of the bookmark: https://github.com/theaidenlab/3d-dna

ContigExtender: a new approach to improving de novo sequence assembly for viral metagenomics data

LEGE — Wed, 08 May 2024 07:32:45 -0500

ContigExtender, was developed to extend contigs, complementing de novo assembly. ContigExtender employs a novel recursive Overlap Layout Candidates (r-OLC) strategy that explores multiple extending paths to achieve longer and highly accurate contigs. ContigExtender is effective for extending contigs significantly in in silico synthesized and real metagenomics datasets.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7953547/

Address of the bookmark: https://github.com/dengzac/contig-extender

fragScaff: Genome Assembly with Contiguity Preserving Transposition

Jit — Mon, 14 May 2018 04:28:14 -0500

Contiguity preserving transposition and sequencing (CPT-seq) is an entirely in vitro means of generating libraries comprised of 9216 indexed pools, each of which contains thousands of sparsely sequenced long fragments ranging from 5 kilobases to >1 megabase. This software, fragScaff, leverages coincidences between the content of different pools as a source of contiguity information for scaffolding de novo genome assemblies. FragScaff is complementary to Lachesis, providing midrange contiguity to support robust, accurate chromosome-scale de novo genome assemblies without the need for laborious in vivo cloning steps.

Further information about fragScaff, including source code, is available at:https://sourceforge.net/projects/fragscaff/files.

Manuscript describing fragScaff was published as: Adey A, Kitzman JO, Burton JN, Daza R, Kumar A, Christiansen L, Ronaghi M, Amini S, L Gunderson K, Steemers FJ, Shendure J#. In vitro, long-range sequence information for de novo genome assembly via transposase contiguity. Genome Research 2014 Dec;24(12):2041-9. doi: 10.1101/gr.178319.114. PubMed PMID: 25327137.

Address of the bookmark: https://sourceforge.net/projects/fragscaff/files/

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

Meraculous: De Novo Genome Assembly with Short Paired-End Reads

Jit — Tue, 07 Nov 2017 04:36:10 -0600

We describe a new algorithm, meraculous, for whole genome assembly of deep paired-end short reads, and apply it to the assembly of a dataset of paired 75-bp Illumina reads derived from the 15.4 megabase genome of the haploid yeast Pichia stipitis. More than 95% of the genome is recovered, with no errors; half the assembled sequence is in contigs longer than 101 kilobases and in scaffolds longer than 269 kilobases. Incorporating fosmid ends recovers entire chromosomes. Meraculous relies on an efficient and conservative traversal of the subgraph of the k-mer (deBruijn) graph of oligonucleotides with unique high quality extensions in the dataset, avoiding an explicit error correction step as used in other short-read assemblers. A novel memory-efficient hashing scheme is introduced. The resulting contigs are ordered and oriented using paired reads separated by ∼280 bp or ∼3.2 kbp, and many gaps between contigs can be closed using paired-end placements. Practical issues with the dataset are described, and prospects for assembling larger genomes are discussed.

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3158087/

De novo Genome Assembly for Illumina Data

Rahul Nayak — Mon, 20 Jan 2020 05:13:29 -0600

Written and maintained by Simon Gladman - Melbourne Bioinformatics (formerly VLSCI)

Protocol Overview / Introduction

In this protocol we discuss and outline the process of de novo assembly for small to medium sized genomes.

https://www.melbournebioinformatics.org.au/tutorials/tutorials/assembly/assembly-protocol/

Address of the bookmark: https://www.melbournebioinformatics.org.au/tutorials/tutorials/assembly/assembly-protocol/

Ra assembler - a de novo DNA assembler for third generation sequencing data

biogeek — Wed, 27 Dec 2017 20:36:54 -0600

Integration of the Ra assembler - a de novo DNA assembler for third generation sequencing data developed on Faculty of Electrical Engineering and Computing (FER), Ruder Boskovic Institute (RBI) and Genome Institute of Singapore (GIS).

Ra is in development since 2014 in the form of several separate components that used to be run individually.
This project aims to ease the usage of Ra by integrating it into a complete de novo assembly tool.

Unlike other state-of-the-art assemblers, Ra does not have an error correction step. Instead, it relies on detecting overlaps using a very sensitive and specific overlapper ("graphmap -w owler", https://github.com/isovic/graphmap) and constructing and reducing an overlap graph (Ra layout, https://github.com/mariokostelac/ra).

Address of the bookmark: https://github.com/mariokostelac/ra-integrate/