BOL: Related items

ASCIIGenome: genome browser based on command line interface and designed for running from console terminals.

Neel — Fri, 09 Nov 2018 13:50:04 -0600

ASCIIGenome is a genome browser based on command line interface and designed for running from console terminals.

Since ASCIIGenome does not require a graphical interface it is particularly useful for quickly visualizing genomic data on remote servers while offering flexibility similar to popular GUI viewers like IGV.

Documentation is at readthedocs/asciigenome.

Address of the bookmark: https://github.com/dariober/ASCIIGenome

ARCS: scaffolding genome drafts with linked reads

Jit — Mon, 17 Dec 2018 17:40:28 -0600

ARCS requires two input files:

Draft assembly fasta file
Interleaved linked reads file (Barcode sequence expected in the BX tag of the read header or in the form "@readname_barcode" ; Run Long Ranger basic on raw chromium reads to produce this interleaved file)

Address of the bookmark: https://github.com/bcgsc/ARCS/

LTR_Finder: an efficient program for finding full-length LTR retrotranspsons in genome sequences.

Neel — Sun, 13 Jan 2019 07:05:53 -0600

LTR_Finder is an efficient program for finding full-length LTR retrotranspsons in genome sequences.

The Program first constructs all exact match pairs by a suffix-array based algorithm and extends them to long highly similar pairs. Then Smith-Waterman algorithm is used to adjust the ends of LTR pair candidates to get alignment boundaries. These boundaries are subject to re-adjustment using supporting information of TG..CA box and TSRs and reliable LTRs are selected. Next, LTR_FINDER tries to identify PBS, PPT and RT inside LTR pairs by build-in aligning and counting modules. RT identification includes a dynamic programming to process frame shift. For other protein domains, LTR_FINDER calls ps_scan (from PROSITE, http://www.expasy.org/prosite/) to locate cores of important enzymes if they occur.

Address of the bookmark: https://github.com/xzhub/LTR_Finder

CAUSEL: an epigenome- and genome-editing pipeline for establishing function of noncoding GWAS variants

BioJoker — Tue, 09 Apr 2019 07:23:37 -0500

Validated a widely accessible approach that can be used to establish functional causality for noncoding sequence variants identified by GWASs.

https://www.nature.com/articles/nm.3975

Address of the bookmark: https://www.nature.com/articles/nm.3975

Complete genome sequence of Wuhan seafood market pneumonia virus is out !

Jit — Fri, 31 Jan 2020 02:36:59 -0600

Wuhan-Hu-1 claimed at least 40 lives and infected at least 1300 others in China. Cases are now being reported from Thailand, Singapore, Malaysia, South Korea, Japan, Vietnam, Nepal, France, Australia and even as far as the US. On Jan 10 2020, while news of the first fatality was barely trickling in, the 29,903 letters constituting the viral genome from an affected individual in Wuhan had already been elucidated (even though a few corrections were made subsequently). All the viral genome sequences from affected individuals are very very close to each other. Several are identical and none has more than 5 differences (99.983% similarity). This strongly suggests that transmission into humans came from a single pointed source and happened very recently, between Sep-Dec 2019.

Check out the detail at https://www.ncbi.nlm.nih.gov/nuccore/MN908947

SeqMule: Automated human exome/genome variants detection

BioStar — Tue, 18 Feb 2020 03:22:54 -0600

SeqMule takes single-end or paird-end FASTQ or BAM files, generates a script consisting of more than 10 popular alignment, analysis tools and runs the script line by line. Users can change the pipeline or fine-tune the parameters by modifying its configuration file.

Address of the bookmark: https://doc-openbio.readthedocs.io/projects/seqmule/en/latest/

JCVI:Python utility libraries on genome assembly, annotation and comparative genomics

Jit — Tue, 17 Mar 2020 06:19:06 -0500

Collection of Python libraries to parse bioinformatics files, or perform computation related to assembly, annotation, and comparative genomics.

https://github.com/tanghaibao/jcvi

More at https://github.com/tanghaibao/jcvi/wiki

Address of the bookmark: https://github.com/tanghaibao/jcvi

HASLR: a hybrid assembler which uses both second and third generation sequencing reads

BioStar — Mon, 04 May 2020 02:04:03 -0500

HASLR, a hybrid assembler which uses both second and third generation sequencing reads to efficiently generate accurate genome assemblies. Our experiments show that HASLR is not only the fastest assembler but also the one with the lowest number of misassemblies on all the samples compared to other tested assemblers. Furthermore, the generated assemblies in terms of contiguity and accuracy are on par with the other tools on most of the samples. Availability. HASLR is an open source tool available at https://github.com/vpc-ccg/haslr.

Address of the bookmark: https://github.com/vpc-ccg/haslr

Pollard Lab

Fri, 25 Sep 2020 20:20:50 -0500

We are a bioinformatics research lab focused on developing novel methods and using them to study genome evolution, organization, and regulation. Our mission is to decode biomedical knowledge that is missed without rigorous statistical approaches.

http://docpollard.org/

Tools

http://docpollard.org/resources/software/

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD