Address of the bookmark: http://www.phrap.org/consed/consed.html

The "Ifs" of NGS QC and Trimming

1. Ensures Data Integrity
   If you want to minimize errors in downstream analyses, QC and trimming remove low-quality reads and bases, ensuring high-confidence data. This step is essential for reliable variant calling, assembly, and other applications.

2. Removes Contaminants
   If adapter sequences or contaminants are present in the raw reads, trimming can eliminate them. This prevents issues like misalignment or incorrect biological interpretations, ensuring cleaner data for analysis.

3. Improves Mapping and Assembly
   If your goal is better alignment to a reference genome or improved de novo assembly, trimming low-quality bases and adapters is critical. High-quality reads map more efficiently and generate more accurate assemblies.

4. Reduces Computational Load
   If you want to save computational resources, trimming reduces the dataset size, which speeds up processing and analysis. Clean datasets mean less computational time spent on processing low-quality data.

5. Prepares for Standardized Analyses
   If your project involves multiple datasets, QC and trimming ensure uniformity across them. This standardization makes comparisons valid and reproducible, particularly in large collaborative studies.

The "Buts" of NGS QC and Trimming

1. Risk of Over-Trimming
   But excessive trimming can lead to the loss of informative sequences, reducing read depth and potentially discarding biologically relevant data. This is especially critical in studies with limited sequencing depth.

2. Bias Introduction
   But trimming algorithms might introduce biases, especially if they inadvertently remove sequences with specific biological patterns. This can skew results and compromise biological insights.

3. Loss of Context in Paired-End Reads
   But trimming one read in a pair more than the other can lead to loss of pairing information. This complicates downstream analyses that rely on paired-end data, such as structural variant detection.

4. Time and Resource Intensive
   But running QC and trimming for large datasets can be computationally expensive and time-consuming. As sequencing depth increases, preprocessing becomes a bottleneck in the analysis pipeline.

5. Variable Standards
   But the criteria for trimming (e.g., quality threshold, minimum read length) can vary between tools and datasets. This variability may affect reproducibility and comparability of results across studies.

Balancing the "Ifs" and "Buts"

To maximize the benefits of QC and trimming while mitigating the challenges, consider the following best practices:

• Use QC Tools Wisely: Start with tools like FastQC to identify quality issues in your raw data. Visualizing quality metrics helps tailor your trimming parameters.

• Choose Reliable Trimming Tools: Tools like Trimmomatic, Cutadapt, and BBduk offer adaptive and customizable trimming options. Select one that aligns with your dataset and project goals.

• Set Reasonable Parameters: Avoid over-trimming by setting quality thresholds and minimum read lengths that balance data retention and quality improvement.

• Test Downstream Effects: Validate the impact of QC and trimming on downstream analyses, such as alignment efficiency, variant calling accuracy, or assembly quality.

• Document Your Workflow: Maintain detailed records of the parameters and tools used for QC and trimming. This ensures reproducibility and enables better troubleshooting.

Conclusion

NGS quality control and trimming are essential steps to ensure reliable and accurate data for analysis. While the "ifs" highlight the clear benefits of these steps, the "buts" remind us of the potential pitfalls. By adopting best practices and carefully balancing these considerations, you can optimize your preprocessing workflow and unlock the full potential of your sequencing data.

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-015-0644-7

Address of the bookmark: https://sourceforge.net/projects/surankco/

Address of the bookmark: https://github.com/schneebergerlab/syri

The biggest and perhaps most fearsome of the world's big cats, the tiger, shares 95.6 percent of its DNA with humans' cute and furry companions, domestic cats.

The new research showed that big cats have genetic mutations that enabled them to be carnivores. The team also identified mutations that allow snow leopards to thrive at high altitudes.

Reference:

http://www.nbcnews.com/science/your-cat-ferocious-tigers-share-lot-95-6-percent-their-4B11182690

http://timesofindia.indiatimes.com/home/environment/flora-fauna/Gene-mapping-of-tiger-completed/articleshow/22671681.cms

Paper:

http://www.nature.com/ncomms/2013/130917/ncomms3433/full/ncomms3433.html

http://en.wikipedia.org/wiki/Sequence_assembly 

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0951-y

Address of the bookmark: https://sourceforge.net/projects/operasf/

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

Address of the bookmark: https://github.com/dentearl/evolverSimControl

See http://mash.readthedocs.org for more information.

Address of the bookmark: https://github.com/marbl/Mash/releases

https://www.nature.com/articles/nmeth.4556

Address of the bookmark: https://github.com/ryanlayer/giggle