BOL: Related items

Alignment-free sequence comparison tools available for next-generation sequencing data analysis

Abhimanyu Singh — Tue, 07 Nov 2017 05:33:33 -0600

kallisto

Transcript abundance quantification from RNA-seq data (uses pseudoalignment for rapid determination of read compatibility with targets)

Software (C++)

https://pachterlab.github.io/kallisto/

Sailfish

Estimation of isoform abundances from reference sequences and RNA-seq data (k-mer based)

Software (C++)

http://www.cs.cmu.edu/~ckingsf/software/sailfish/

Salmon

Quantification of the expression of transcripts using RNA-seq data (uses k-mers)

https://combine-lab.github.io/salmon/

RNA-Skim

RNA-seq quantification at transcript-level (partitions the transcriptome into disjoint transcript clusters; uses sig-mers, a special type of k-mers)

Software (C++)

http://www.csbio.unc.edu/rs/

Variant calling

ChimeRScope

Fusion transcript prediction using gene k-mers profiles of the RNA-seq paired-end reads

Software (Java)

https://github.com/ChimeRScope/ChimeRScope/wiki

FastGT

Genotyping of known SNV/SNP variants directly from raw NGS sequence reads by counting unique k-mers

Software (C)

https://github.com/bioinfo-ut/GenomeTester4/

Phy-Mer

Reference-independent mitochondrial haplogroup classifier from NGS data (k-mer based)

Software (Python)

https://github.com/danielnavarrogomez/phy-mer

LAVA

Genotyping of known SNPs (dbSNP and Affymetrix's Genome-Wide Human SNP Array) from raw NGS reads (k-mer based)

Software (C)

http://lava.csail.mit.edu/

MICADo

Detection of mutations in targeted third-generation NGS data (can distinguish patients’ specific mutations; algorithm uses k-mers and is based on colored de Bruijn graphs)

Software (Python)

http://github.com/cbib/MICADo

General mapper

Minimap

Lightweight and fast read mapper and read overlap detector (uses the concept of “minimazers”, a special type of k-mers)

Software (C)

https://github.com/lh3/minimap

Assembly

De novo genome assembly

MHAP

Produces highly continuous assembly (fully resolved chromosome arms) from third-generation long and noisy reads (10 kbp) using a dimensionality reduction technique MinHash

Software (Java)

https://github.com/marbl/MHAP

Miniasm

Assembler of long noisy reads (SMRT, ONT) using the Overlap-Layout Consensus (OLC) approach without the necessity of an error correction stage (uses minimap)

Software (C)

https://github.com/lh3/miniasm

LINKS

Scaffolding genome assembly with error-containing long sequence (e.g., ONT or PacBio reads, draft genomes)

Software (Perl)

https://github.com/warrenlr/LINKS/

Read clustering

afcluster

Clustering of reads from different genes and different species based on k-mer counts

Software (C++)

https://github.com/luscinius/afcluster

QCluster

Clustering of reads with alignment-free measures (k-mer based) and quality values

Software (C++)

http://www.dei.unipd.it/~ciompin/main/qcluster.html

Reads error correction

Lighter

Correction of sequencing errors in raw, whole genome sequencing reads (k-mer based)

Software (C++)

https://github.com/mourisl/Lighter

QuorUM

Error corrector for Illumina reads using k-mers

Software (C++)

https://github.com/gmarcais/Quorum

Trowel

Software (C++)

https://sourceforge.net/projects/trowel-ec/

Metagenomics

Assembly-free phylogenomics

AAF

Phylogeny reconstruction directly from unassembled raw sequence data from whole genome sequencing projects; provides bootstrap support to assess uncertainty in the tree topology (k-mer based)

Software (Python)

https://github.com/fanhuan/AAF

kSNP v3

Reference-free SNP identification and estimation of phylogenetic trees using SNPs (based on k-mer analysis)

Software (C)

https://sourceforge.net/projects/ksnp/files/

NGS-MC

Phylogeny of species based on NGS reads using alignment-free sequence dissimilarity measures d2* and d2 S under different Markov chain models (using k-words)

R package

http://www-rcf.usc.edu/~fsun/Programs/NGS-MC/NGS-MC.html

Species identification/taxonomic profiling

CLARK

Taxonomic classification of metagenomic reads to known bacterial genomes using k-mer search and LCA assignment

Software (C++)

http://clark.cs.ucr.edu/

FOCUS

Reports organisms present in metagenomic samples and profiles their abundances (uses composition-based approach and non-negative least squares for prediction)

Web service Software (Python)

http://edwards.sdsu.edu/FOCUS/

GSM

Estimation of abundances of microbial genomes in metagenomic samples (k-mer based)

Software (Go)

https://github.com/pdtrang/GSM

Mash

Species identification using assembled or unassembled Illumina, PacBio, and ONT data (based on MinHash dimensionality-reduction technique)

Software (C++)

https://github.com/marbl/mash

Kraken

Taxonomic assignment in metagenome analysis by exact k-mer search; LCA assignment of short reads based on a comprehensive sequence database

Software (C++)

https://ccb.jhu.edu/software/kraken/

LMAT

Assignment of taxonomic labels to reads by k-mers searches in precomputed database

Software (C++/Python)

https://sourceforge.net/projects/lmat/

stringMLST

k-mer-based tool for MLST directly from the genome sequencing reads

Software (Python)

http://jordan.biology.gatech.edu/page/software/stringMLST

Taxonomer

k-mer-based ultrafast metagenomics tool for assigning taxonomy to sequencing reads from clinical and environmental samples

Web service

http://taxonomer.iobio.io/

Other

d2-tools

Word-based (k-tuple) comparison (pairwise dissimilarity matrix using d2S measure) of metatranscriptomic samples from NGS reads

Software (Python/R)

https://code.google.com/p/d2-tools/

VirHostMatcher

Prediction of hosts from metagenomic viral sequences based on ONF using various distance measures (e.g., d2)

Software (C++)

https://github.com/jessieren/VirHostMatcher

MetaFast

Statistics calculation of metagenome sequences and the distances between them based on assembly using de Bruijn graphs and Bray–Curtis dissimilarity measure

Software (Java)

https://github.com/ctlab/metafast

GenoFig: a user-friendly application for the visualization and comparison of genomic regions

BioStar — Mon, 05 Aug 2024 23:06:58 -0500

Tool for graphical vizualisation of annotated genetic regions, and homologous regions comparison. It is an independent recoding of Easyfig 2 initially developped by at the S. Beatson Lab [https://mjsull.github.io/Easyfig/]

Download the GenoFig source code using the 'Download' button on top of this page. Cloning is currently not available for people not member of the INRAE French Institution. After decompression, open a terminal in the folder containing the decompressed files and run:

conda env create -f extras/requirements.yml
extras/SETUP.sh

Address of the bookmark: https://forgemia.inra.fr/public-pgba/genofig

Syri compares alignments between two chromosome-level assemblies and identifies synteny and structural rearrangements.

Shruti Paniwala — Wed, 01 Jun 2022 02:01:13 -0500

Syri compares alignments between two chromosome-level assemblies and identifies synteny and structural rearrangements.

Address of the bookmark: https://github.com/schneebergerlab/syri

Scalpel

Shruti Paniwala — Wed, 20 Aug 2014 02:07:58 -0500

A team from Cold Spring Harbor Laboratory has released an algorithm, called Scalpel, for finding insertions and deletions in next generation sequencing data sets. Scalpel, which is open source and available for download on SourceForge, outperformed the popular tools GATK HaplotypeCaller and SOAPindel in test runs on both simulated and real whole human exomes.

Like other indel callers, Scalpel works by performing de novo assembly of regions of interest, so that misalignment to the reference genome cannot obscure the presence of an insertion or deletion. Scalpel's innovation is to repeatedly check its assembly before comparing to the reference genome, to account for simple sequence repeats that are a regular source of error in indel calling. When Scalpel assembles an exon, it collects reads that map to that exon (including partial matches), splits them into k-mers, and creates a de Bruijn graph to span the exon; however, if it detects repeats in the map, it iteratively increases the size of the k-mers by one base until the repeats are eliminated. This ensures that the final assembly of the exon is highly accurate while minimizing compute time.

The Cold Spring Harbor team's validation of Scalpel, published over the weekend in Nature Methods, compares Scalpel's performance on a live whole exome against HaplotypeCaller and SOAPindel. The donor is an individual with serious neurological disorders, which may be linked to a high incidence of indels. One thousand indels from this individual's exome, called by one or more of the informatics pipelines, were selected for focused resequencing. This resequencing revealed a 77% true positive rate for Scalpel calls, dramatically better than the rates for either of the competing tools; Scalpel performed especially well with indels longer than five base pairs, a traditional weak point for indel callers.

Finally, the authors demonstrate Scalpel's use on a large set of genetic data from nearly 600 families who donated samples to the Simons Simplex Collection, a project of the Simons Foundation Autism Research Initiative. Scalpel found a very high enrichment for indels in children affected by autism, compared with their unaffected siblings, a pattern that persisted even after excluding common variants.

Picard

Neel — Fri, 29 Apr 2016 08:21:54 -0500

Picard is a set of command line tools for manipulating high-throughput sequencing (HTS) data and formats such as SAM/BAM/CRAM and VCF. These file formats are defined in the Hts-specs repository. See especially the SAM specification and the VCF specification.

Note that the information on this page is targeted at end-users. For developers, the source code, building instructions and implementation/development resources are available on GitHub.

The Picard toolkit is open-source under the MIT license and free for all uses.

Enjoy!

Address of the bookmark: http://broadinstitute.github.io/picard/

Andi

Jit — Fri, 13 May 2016 05:16:35 -0500

This is the andi program for estimating the evolutionary distance between closely related genomes. These distances can be used to rapidly infer phylogenies for big sets of genomes. Because andi does not compute full alignments, it is so efficient that it scales even up to thousands of bacterial genomes.

This readme covers all necessary instructions for the impatient to get andi up and running. For extensive instructions please consult the manual.

More at https://github.com/evolbioinf/andi/

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2015/01/13/bioinformatics.btu815.full

Bpipe - a tool for running and managing bioinformatics pipelines

Radha Agarkar — Sat, 21 May 2016 22:42:16 -0500

Bpipe provides a platform for running big bioinformatics jobs that consist of a series of processing stages - known as 'pipelines'.

January 20th, 2016 - New! Bpipe 0.9.9 released!
Download latest, all
Documentation
Mailing List (Google Group)

Bpipe has been published in Bioinformatics! If you use Bpipe, please cite:

Sadedin S, Pope B & Oshlack A, Bpipe: A Tool for Running and Managing Bioinformatics Pipelines, Bioinformatics

Address of the bookmark: http://docs.bpipe.org/

CovCal: Coverage / Read Count Calculator

Jit — Wed, 15 Jun 2016 18:08:13 -0500

Coverage / Read Count Calculator

Calculate how much sequencing you need to hit a target depth of coverage (or vice versa).

Instructions: set the read length/configuration and genome size, then select what you want to calculate.

Written by Stephen Turner, based on the Lander-Waterman formula, inspired by a similar calculator written by James Hadfield. Coverage is calculated as C=LN/G and reads as N=CG/L where C = Coverage (X),L = Read length (bp), G = Haploid genome size (bp), and N = Number of reads. Source code on GitHub.

Address of the bookmark: http://apps.bioconnector.virginia.edu/covcalc/

HivePlot

Jit — Thu, 16 Feb 2017 11:39:34 -0600

The hive plot is a rational visualization method for drawing networks. Nodes are mapped to and positioned on radially distributed linear axes — this mapping is based on network structural properties. Edges are drawn as curved links. Simple and interpretable.

The purpose of the hive plot is to establish a new baseline for visualization of large networks — a method that is both general and tunable and useful as a starting point in visually exploring network structure.

More at http://www.hiveplot.com/

Address of the bookmark: http://www.hiveplot.com/

SVfinder: Tool for detecting genomic rearrangement form DNA-seq data

Robert M Willioms — Thu, 14 Dec 2017 15:51:40 -0600

SVfinder provides genome-wide detection of structural variants from next generation paired-end sequencing reads.

Address of the bookmark: https://github.com/cauyrd/SVfinder