Address of the bookmark: https://github.com/liviurotiul/PeGAS

Following are the useful links:

Single Cell RNAseq data analysis Tutorial

A step-by-step workflow for low-level analysis of single-cell RNA-seq data

A step-by-step workflow for low-level analysis of single-cell RNA-seq data with Bioconductor

SCell: single-cell RNA-seq analysis software

https://github.com/diazlab/SCell

Beta-Poisson model for single-cell RNA-seq data analyses

https://github.com/nghiavtr/BPSC

Sincera: A Computational Pipeline for Single Cell RNA-Seq Profiling Analysis

https://research.cchmc.org/pbge/sincera.html

SC3 – consensus clustering of single-cell RNA-Seq data

http://biorxiv.org/content/early/2016/09/02/036558

Citrus: A toolkit for single cell sequencing analysis

http://biorxiv.org/content/early/2016/09/14/045070

Single-Cell Resolution of Temporal Gene Expression during Heart Development

http://www.cell.com/developmental-cell/fulltext/S1534-5807(16)30682-7

Scalable latent-factor models applied to single-cell RNA-seq data separate biological drivers from confounding effects

http://biorxiv.org/content/early/2016/11/15/087775

Single cell transcriptomes identify human islet cell signatures and reveal cell-type-specific expression changes in type 2 diabetes

http://genome.cshlp.org/content/early/2016/11/18/gr.212720.116.abstract

SCODE: An efficient regulatory network inference algorithm from single-cell RNA-Seq during differentiation

http://biorxiv.org/content/early/2016/11/21/088856

SCOUP is a probabilistic model to analyze single-cell expression data during differentiation

https://github.com/hmatsu1226/SCOUP

scLVM is a modelling framework for single-cell RNA-seq data

https://github.com/PMBio/scLVM

Selective Locally linear Inference of Cellular Expression Relationships (SLICER) algorithm for inferring cell trajectories

https://github.com/jw156605/SLICER

SinQC: A Method and Tool to Control Single-cell RNA-seq Data Quality

http://www.morgridge.net/SinQC.html

TSCAN: Pseudo-time reconstruction and evaluation in single-cell RNA-seq analysis

https://github.com/zji90/TSCAN

Visualization and cellular hierarchy inference of single-cell data using SPADE

http://www.nature.com/nprot/journal/v11/n7/full/nprot.2016.066.html

OEFinder: Identify ordering effect genes in single cell RNA-seq data

https://github.com/lengning/OEFinder

https://github.com/zhangzhwlab/delta

Address of the bookmark: https://github.com/zhangzhwlab/delta

1. Supply your genes/genomic segments/phylogenetic tree of interest in the input-box by
   • selecting the type of identifier and pasting identifiers (one per line)
   • or by using the gene ID search tool
   • or with the BLAST search tool
2. Click "Visualize context".

Consult the documentation to learn more about MGcV.

Address of the bookmark: http://mgcv.cmbi.ru.nl/

• hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
• gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
• comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
• sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
• blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
• filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
  • kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
  • seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
• plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
  • density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
  • profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
  • spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
  • spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
  • spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339 

Address of the bookmark: https://github.com/TGAC/KAT

DeepVariant is an analysis pipeline that uses a deep neural network to call genetic variants from next-generation DNA sequencing data. DeepVariant relies on Nucleus, a library of Python and C++ code for reading and writing data in common genomics file formats (like SAM and VCF) designed for painless integration with the TensorFlow machine learning framework.

https://ai.googleblog.com/2017/12/deepvariant-highly-accurate-genomes.html

https://www.biorxiv.org/content/10.1101/092890v6

Address of the bookmark: https://github.com/google/deepvariant

Juicebox can now be used to visualize and interactively (re)assemble genomes. Check out the Juicebox Assembly Tools Module website https://aidenlab.org/assembly for more details on how to use Juicebox for assembly.

GUI at https://aidenlab.org/juicebox/

Address of the bookmark: https://github.com/aidenlab/Juicebox

Address of the bookmark: http://master.bioconductor.org/packages/release/workflows/vignettes/rnaseqGene/inst/doc/rnaseqGene.html

Bactopia was inspired by Staphopia, a workflow we (Tim Read and myself) released that is targeted towards Staphylococcus aureus genomes. Using what we learned from Staphopia and user feedback, Bactopia was developed from scratch with usability, portability, and speed in mind from the start.

Bactopia uses Nextflow to manage the workflow, allowing for support of many types of environments (e.g. cluster or cloud). Bactopia allows for the usage of many public datasets as well as your own datasets to further enhance the analysis of your sequencing. Bactopia only uses software packages available from Bioconda and Conda-Forge to make installation as simple as possible for all users.

To highlight the use of Bactopia and Bactopia Tools, we performed an analysis of 1,664 public Lactobacillus genomes, focusing on Lactobacillus crispatus, a species that is a common part of the human vaginal microbiome. The results from this analysis are published in mSystems under the title: Bactopia: a flexible pipeline for complete analysis of bacterial genomes

Address of the bookmark: https://bactopia.github.io/latest/

Tasks:  239 total,   1 running,  238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s):  0.0%us,  0.0%sy,  0.0%ni,100.0%id,  0.0%wa,  0.0%hi,  0.0%si,  0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used,  14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
  1 root      39   19  0  0  0 S  0.0  0.0   246:57.22 kipmi0
  2 root      RT   0     0    0    0 S  0.0  0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...