BOL: Related items

ORFfinder with smart BLAST

Jit — Tue, 17 May 2016 01:43:15 -0500

ORF Finder

ORFfinder is a graphical analysis tool for finding open reading frames (ORFs). We’ve been working on a few updates, and we’d like to find out what you think about them. Read on to find out what you can do with the new ORFfinder.

Smart BLAST (https://ncbiinsights.ncbi.nlm.nih.gov/2015/07/29/smartblast/)

Select one or a group of ORFs and BLAST several databases at once, and use the newly developed SmartBLAST to verify protein names. Looking for the traditional results from BLAST? They’re there too.

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/

Mauve: a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion

Jit — Sat, 24 Dec 2016 09:20:53 -0600

Mauve is a system for constructing multiple genome alignments in the presence of large-scale evolutionary events such as rearrangement and inversion. Multiple genome alignments provide a basis for research into comparative genomics and the study of genome-wide evolutionary dynamics.

Mauve has been developed with the idea that a multiple genome aligner should require only modest computational resources. It employs algorithmic techniques that scale well in the lengths of sequences being aligned. For example, a pair of Y. pestis genomes can be aligned in under a minute, while a group of 9 divergent Enterobacterial genomes can be aligned in a few hours. However, the current algorithm’s compute time (progressiveMauve) scales cubically in the number of genomes to align, making it unsuitable for datasets containing more than 50-100 bacterial genomes.

Address of the bookmark: http://darlinglab.org/mauve/mauve.html

gbtools: Interactive Visualization of Metagenome Bins in R

Jit — Sun, 26 Mar 2017 15:41:31 -0500

We have developed gbtools, a software package that allows users to visualize metagenomic assemblies by plotting coverage (sequencing depth) and GC values of contigs, and also to annotate the plots with taxonomic information. Different sets of annotations, including taxonomic assignments from conserved marker genes or SSU rRNA genes, can be imported simultaneously; users can choose which annotations to plot. Bins can be manually defined from plots, or be imported from third-party binning tools and overlaid onto plots, such that results from different methods can be compared side-by-side. gbtools reports summary statistics of bins including marker gene completeness, and allows the user to add or subtract bins with each other.

Tool at https://github.com/kbseah/genome-bin-tools

Address of the bookmark: http://journal.frontiersin.org/article/10.3389/fmicb.2015.01451/full

BBSplit: Read Binning Tool for Metagenomes and Contaminated Libraries

Poonam Mahapatra — Wed, 03 Jan 2018 00:25:27 -0600

BBSplit internally uses BBMap to map reads to multiple genomes at once, and determine which genome they match best. This is different than with ordinary mapping. If a genome (say, human) contains an exact repeat somewhere, reads mapping to it will be mapped ambiguously. But if you want to determine whether reads are mouse or human, it does not matter whether they map ambiguously within human, only whether they are ambiguous between human and mouse. BBSplit tracks this additional ambiguity information and decides how to use it based on the “ambig2” flag. The normal use of BBSplit is like Seal, either quantifying how many reads go to each reference, or splitting the reads into multiple output files, one per reference. BBSplit can only be run using references indexed with BBSplit, as they contain additional information regarding which sequences came from which reference file.

BBSplit is a tool that bins reads by mapping to multiple references simultaneously, using BBMap. The reads go to the bin of the reference they map to best. There are also disambiguation options, such that reads that map to multiple references can be binned with all of them, none of them, one of them, or put in a special "ambiguous" file for each of them. Paired reads will always be kept together.

For example, if you had a library of something that was contaminated with e.coli and salmonella, you could do this:

bbsplit.sh in=reads.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu=clean.fq int=t

This will produce 3 output files:
out_ecoli.fq (ecoli reads)
out_salmonella.fq (salmonella reads)
clean.fq (unmapped reads)

In this case, "int=t" means that the input file is paired and interleaved. For single-end reads you would leave that out. For paired reads in 2 files, you would do this:
bbsplit.sh in1=reads1.fq in2=reads2.fq ref=ecoli.fa,salmonella.fa basename=out_%.fq outu1=clean1.fq outu2=clean2.fq

BBSplit is available here:
https://sourceforge.net/projects/bbmap/

The sensitivity can be raised to be equivalent to BBMap with these flags: "minratio=0.56 minhits=1 maxindel=16000"

CViT: Chromosome Viewing Tool

Rahul Nayak — Wed, 02 Jan 2019 04:10:09 -0600

CViT - Chromosome Viewing Tool. A collection of Perl scripts that enable quick visualizations of features on linkage groups, psuedochromosomes or cytogenetic maps. Intended for whole-genome views of data but can be used to create images of single chromosomes/linkage groups, contigs, or BACs, or even proteins -- any feature that has a location on a backbone. Handles most standard genetic/genomic coordinate systems. Reads GFF3 data and produces a PNG or SVG image.

https://www.hindawi.com/journals/ijpg/2011/373875/

Address of the bookmark: https://sourceforge.net/projects/cvit/

R Package for PCA Analysis

LEGE — Sun, 24 Mar 2024 20:06:24 -0500

An R package for performing principal component analysis (PCA) of genomics data. The package performs PCA, generates the publication-ready plots, and identifies population-specific outlier individuals. The package can be accessed on GitHub: https://github.com/Devashish13/PopulationStructure

Address of the bookmark: https://rpubs.com/Devashish13/PCAGenomics

Figeno: Tool for plotting sequencing data along genomic coordinates.

LEGE — Tue, 17 Sep 2024 02:28:15 -0500

Tool for plotting sequencing data along genomic coordinates.

FIGENO is a
  FIGure
    GENerator
for GENOmics

With figeno, you can plot various types of sequencing data along genomic coordinates. Video overview: https://www.youtube.com/watch?v=h1cBeXoSYTA.

Address of the bookmark: https://github.com/CompEpigen/figeno

Circleator

Jit — Sun, 25 Jun 2017 18:04:32 -0500

The Charm City Circleator--or Circleator for short--is a Perl-based visualization tool developed at the Institute for Genome Sciences in the University of Maryland's School of Medicine. Circleator produces circular plots of genome-associated data, like this one:

Common uses of the tool include:

Displaying the sequence and/or genes in a GenBank flat file.
Highlighting differences and/or similarities in gene content between related organisms.
Comparing SNPs and indels between closely-related strains or serovars.
Comparing gene expression values across multiple samples or timepoints.
Visualizing coverage plots of RNA-Seq read alignments.

Key Features

Circleator...

Builds on BioPerl and the input file formats that it supports, including:
- GenBank flat files, GFF, FASTA
Accepts a number of other commonly-used datatypes and file formats:
- BSR and TRF output, SAM/BAM files, VCF-encoded SNPs, tab-delimited files
Outputs publication-ready figures in the SVG (Scalable Vector Graphics) format.
Requires only a single configuration file whose layout mirrors that of the figure itself.
- Predefined configuration files and "track" types are supplied for common datasets.
- Advanced features allow limited analyses to be performed as a figure is drawn.
Includes an extensive set of regression tests.
Offers a prototype web-based GUI (under the "Ringmaster" project.)

https://github.com/jonathancrabtree/Circleator

Address of the bookmark: https://github.com/jonathancrabtree/Circleator

CHSMiner: a GUI tool to identify chromosomal homologous segments

Jit — Sat, 18 Nov 2017 16:55:49 -0600

Background

The identification of chromosomal homologous segments (CHS) within and between genomes is essential for comparative genomics. Various processes including insertion/deletion and inversion could cause the degeneration of CHSs.

Results

Here we present a Java software CHSMiner that detects CHSs based on shared gene content alone. It implements fast greedy search algorithm and rigorous statistical validation, and its friendly graphical interface allows interactive visualization of the results. We tested the software on both simulated and biological realistic data and compared its performance with similar existing software and data source.

Conclusion

CHSMiner is characterized by its integrated workflow, fast speed and convenient usage. It will be useful for both experimentalists and bioinformaticians interested in the structure and evolution of genomes.

https://github.com/zhenwang100/CHSMiner

Address of the bookmark: https://almob.biomedcentral.com/articles/10.1186/1748-7188-4-2