1. NCBI (National Center for Biotechnology Information):

   • NCBI provides various databases related to genetic information, including 16S rRNA sequences.
   • You can access the 16S ribosomal RNA sequences from NCBI's Nucleotide database (https://www.ncbi.nlm.nih.gov/nucleotide/).
   • Perform a search using keywords like "16S rRNA" or specific bacterial names to find relevant sequences.
   • You can download sequences individually or in batches using the provided tools.

2. GreenGenes:

   • GreenGenes is a widely used 16S rRNA gene sequence database.
   • You can access it at http://greengenes.secondgenome.com/.
   • GreenGenes provides precompiled databases for various purposes, including classification, alignment, and phylogenetic analysis.

3. SILVA:

   • SILVA (https://www.arb-silva.de/) is another comprehensive database for ribosomal RNA (rRNA) sequences.
   • It covers not only 16S rRNA but also other ribosomal RNA sequences.
   • SILVA provides precompiled databases for various purposes, including taxonomic classification and alignment.

4. Ribosomal Database Project (RDP):

   • RDP (http://rdp.cme.msu.edu/) is a curated database that offers 16S rRNA sequences.
   • It provides tools for sequence analysis and classification.
   • You can download sequences and taxonomy information from their website.

5. QIIME (Quantitative Insights Into Microbial Ecology):

   • QIIME (https://qiime2.org/) is a widely used bioinformatics platform for microbiome analysis.
   • It provides tools for analyzing microbial communities, including processing 16S rRNA sequences.
   • QIIME often includes its own preprocessed 16S rRNA databases that can be used for analysis within the platform.

Before downloading any database, make sure to read the terms of use and citation requirements, as some databases may have specific usage policies. Additionally, consider the compatibility of the database with your analysis pipeline and software tools.

NCBI 16s RNA database location ftp://ftp.ncbi.nih.gov/blast/db/16SMicrobial.tar.gz

No of vacancies: 01

Pay scale:Rs. 15600 – 39100 + 6600/-

Essential Academic Qualifications / Experience : Good academic record as defined by the concerned university with at least 55% marks (or an equivalent grade in a point scale wherever grading system is followed) at the Master's Degree level in a relevant subject from an Indian University, or an equivalent degree from an accredited foreign university.

Besides fulfilling the above qualifications, the candidate must have cleared the National Eligibility Test (NET) conducted by the UGC, CSIR or similar test accredited by the UGC like SLET/ SET.

Notwithstanding anything contained in sub-clauses (a) and (b) to this Clause, candidates, who are, or have been awarded a Ph.D. Degree in accordance with the University Grants Commission (Minimum Standards and Procedure for Award of Ph.D. Degree) Regulations, 2009, shall be exempted from the requirement of the minimum eligibility condition of NET/SLET/SET for recruitment and appointment of Assistant Professor or equivalent positions in Universities/Colleges/Institutions.

NET/SLET/SET shall also not be required for such Masters Programmes in disciplines for which NET/SLET/SET is not conducted.

Apply online: http://www.psc.cg.gov.in/htm/OA_ME2014.html

Last Date for Online Registration: 22/05/2014

For more details: http://www.psc.cg.gov.in/pdf/Advertisement/ADV_ME2014.pdf

bwa aln hs37m.fa r1.fq > r1.sai && bwa aln hs37m.fa r2.fq > r2.sai \
&& bwa sampe hs37m r1.sai r2.sai r1.fq r2.fq > r12.bwa.sam

bwa bwasw ../index/bwa/hs37m.fa r12.fq > r12.bwasw.sam

gsnap -A sam -d hs37m r1.fq r2.fq > r12.gsnap.sam

novoalign -r Random -o SAM -f r1.fq r2.fq -i 500 50 -d hs37m-k14s3.novo > r12.novo.sam

smalt map -f samsoft -i 650 -o r12.smalt-k20s13.sam hs37m-k20s13 r1.fq r2.fq

stampy.py -g hs37m -h hs37m -o r12.stampy.sam -M r1.fq,r2.fq

soap -D hs37m.fa.index -a r1.fq -b r2.fq -l 32 -g 3 -u dummy -2 dummy -o r12.soap

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume.  NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

More at http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Following are the list of tools commonly used to PPIs predictions:

Protein-Protein Interaction Sites

PPISP

A consensus neural network method for predicting protein-protein interaction sites

HOMCOS

A server to predict interacting protein pairs and interacting sites by homology modeling of complex structures

HotPOINT

Prediction of protein interfaces using an empirical model

ISIS

Prediction of interaction hotspots from sequence

KFC server

Automated decision-tree approach to predicting protein-protein interaction hot spots

meta-PPISP

A meta server for predicting protein-protein interaction sites. meta-PPISP is built on three individual web servers: cons-PPISP, PINUP, and Promate

ODA

Identification of optimal surface patches with the lowest docking desolvation energy values

PINUP

Protein binding site prediction with an empirical scoring function

Other Sites (DNA, RNA, Metals)

CHED 

Web server for predicting soft metal binding sites in proteins

DBD-Hunter

A knowledge-based method for the prediction of DNA-protein interactions

DISPLAR

Given the structure of a protein known to bind DNA, the method predicts residues that contact DNA using neural network method

iDBPs

Predicts DNA binding proteins for proteins with known 3D structure.

PFplus

ICRISAT seeks applications from Indian nationals Visiting Scientist-Computational Genomics (2 positions), to be part of a team of Centre of Excellence in Genomics (CEG), (www.icrisat.org/ceg) to work on legume genomics projects. The positions will be based at ICRISAT’s Headquarters in Patancheru, Hyderabad, India.

ICRISAT is a non-profit, non-political organization that conducts agricultural research for development in Asia and sub-Saharan Africa with a wide array of partners throughout the world. Covering 6.5 million square kilometers of land in 55 countries, the semi-arid tropics is home to over 2 billion people, with 650 million of these are the poorest of the poor. ICRISAT and its partners help empower those living in the semi-arid tropics, especially smallholder farmers, to overcome poverty, hunger, malnutrition and a degraded environment through more efficient and profitable agriculture. ICRISAT is headquartered in Greater Hyderabad, Andhra Pradesh, India and belongs to the Consortium of Centers supported by the Consultative Group on International Agricultural Research (CGIAR).

The Job: Responsibilities for these positions include:

Analyzing and handling large-scale next generation sequencing DNA and RNA data
Data mining and development of pipelines and troubleshooting
Genome diversity analysis such as SNPs, Indels, Structural Variations, population structure
Genome wide association study (GWAS) related analysis- LD analysis, hapmap and trait mapping
Expression analysis based on RNA-Seq data, annotation, gene ontology and metabolic pathway analysis
Epigenome analysis, small RNA identification
Gene family analysis, sequence level protein analysis, orthology/paralogy and molecular modelling
Compiling and analysis of results, writing reports and research papers

The Person: Ph.D. or MSc/MTech/PGDCA with two years research experience in Biotechnology, Computational biology, Agricultural/ Plant Biotechnology, Genetics, Molecular Biology or related discipline. Good knowledge of programming/scripting in at least two of following languages: Perl, C, C++, R, Shell Scripting and Python is plus.

How to apply: Please apply latest by 20 July 2014. The application should include the name of the position applied for, a letter of motivation, a full Curriculum Vita (CV), and the names and contact information of three references that are knowledgeable of the candidate’s professional qualifications and work experience. Technical details and more information about these positions can be obtained from R.K.VARSHNEY@CGIAR.ORG. All applications will be acknowledged, however only short listed candidates will be contacted.

Apply here https://recruit.zoho.com/ats/Portal.na?digest=T642sgLYWZOStExJ77cPrcM*sIMGZETWw4yPxngbmHA-

Below you can find a few basic tutorials for how to run MITObim and I encorage you to give them a try with the testdata that comes with this Repo, just to make sure everything is running smoothly on your system. It'll only take a few minutes and will potentially safe you a lot of time down the line.

I provide further examples here as Jupyter notebooks. Get in touch if you feel like sharing your particular MITObim solution and I'd be happy to put it up here, too!

Address of the bookmark: https://github.com/chrishah/MITObim

Address of the bookmark: http://www.programmingr.com/category/stype/r-job-listings/