BOL: Related items

Want to Know which genome assembler rule the world ?

Rahul Agarwal — Sun, 11 Aug 2013 11:42:32 -0500

Assemblathon 2: evaluating de novo methods of genome assembly

http://www.gigasciencejournal.com/content/2/1/10/abstract

http://blogs.nature.com/news/2013/07/genome-assembly-contest-prompts-soul-searching.html

http://assemblathon.org/post/44431915644/feedback-and-analysis-of-the-assemblathon-2-p

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

YASRA: Reference based assembler

Abhimanyu Singh — Wed, 01 Mar 2017 08:32:45 -0600

YASRA (Yet Another Short Read Assembler) performs comparative assembly of short reads using a reference genome, which can differ substantially from the genome being sequenced. Mapping reads to reference genomes makes use of LASTZ (Harris et al), a pairwise sequence aligner compatible with BLASTZ. Special scoring sets were derived to improve the performance, both in runtime and quality for 454 and Illumina sequence reads.

YASRA uses LASTZ (http://bx.psu.edu/miller_lab for released version and http://www.bx.psu.edu/~rsharris/lastz/newer for newer version) for aligning the sequences to the reference genome. Please install LASTZ (the newest version on http://www.bx.psu.edu/~rsharris/lastz/newer) and add the LASTZ binary in your executable/binary search path before installing YASRA.

Address of the bookmark: https://github.com/aakrosh/YASRA

PERGA: A Paired-End Read Guided De Novo Assembler for Extending Contigs Using SVM and Look Ahead Approach

Rahul Nayak — Tue, 05 Jun 2018 09:57:11 -0500

PERGA - Paired End Reads Guided Assembler PERGA is a novel sequence reads guided de novo assembly approach which adopts greedy-like prediction strategy for assembling reads to contigs and scaffolds. Instead of using single-end reads to construct contig, PERGA uses paired-end reads and different read overlap sizes from O ≥ Omax to Omin to resolve the gaps and branches. Moreover, by constructing a decision model using machine learning approach based on branch features, PERGA can determine the correct extension in 99.7% of cases. PERGA will try to extend the contigs by all feasible nucleotides and determine if these multiple extensions due to sequencing errors or repeats by using looking ahead technology, and it also try to separate the different repeats of nearby genomic regions to make the assembly result more longer and accurate. The simulated E.coli paired-end reads data are generated using GemSim (KE McElroy, F Luciani, T Thomas. Gemsim: General, Error-Model Based Simulator of Next-Generation Sequencing Data. BMC Genomics 2012, 13:74), with coverage 50x, 60x, 100x, read lengths 100-bp, and can be downloaded from https://github.com/zhuxiao/data_PERGA.

Address of the bookmark: https://github.com/hitbio/PERGA

PRICE (Paired-Read Iterative Contig Extension), a de novo genome assembler implemented in C++.

Surabhi Chaudhary — Mon, 11 Jun 2018 03:08:26 -0500

We are pleased to release PRICE (Paired-Read Iterative Contig Extension), a de novo genome assembler implemented in C++. Its name describes the strategy that it implements for genome assembly: PRICE uses paired-read information to iteratively increase the size of existing contigs. Initially, those contigs can be individual reads from a subset of the paired-read dataset, non-paired reads from sequencing technologies that provide non-paired data, or contigs that were output from a prior run of PRICE or any other assembler. http://derisilab.ucsf.edu/software/price/

Address of the bookmark: http://derisilab.ucsf.edu/software/price/

RePS: Repeat-masked Phrap with scaffolding, a WGS sequence assembler

Jit — Sat, 04 Jan 2020 01:08:09 -0600

RePS (Repeat-masked Phrap with scaffolding), a WGS sequence assembler, that explicitly identifies exact kmer repeats from the shotgun data and removes them prior to the assembly. The established software Phrap is used to compute meaningful error probabilities for each base. Clone-end-pairing information is used to construct scaffolds that order and orient the contigs. The updated version of RePS incorporates some of the ideas introduced by Phusion on clustering

More at

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC186573/

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/ricedb/Tools/RePS/RePS-IBM-AIX.tar.gz

shovill: Assemble bacterial isolate genomes from Illumina paired-end reads

BioStar — Sat, 02 Jan 2021 07:05:36 -0600

Shovill is a pipeline which uses SPAdes at its core, but alters the steps before and after the primary assembly step to get similar results in less time. Shovill also supports other assemblers like SKESA, Velvet and Megahit, so you can take advantage of the pre- and post-processing the Shovill provides with those too.

Address of the bookmark: https://github.com/tseemann/shovill

Reference-free prediction of rearrangement breakpoint reads

Neel — Thu, 08 Mar 2018 05:05:25 -0600

lideSort-BPR ( b reak p oint r eads) is based on a fast algorithm for all-against-all comparisons of short reads and theoretical analyses of the number of neighboring reads. When applied to a dataset with a sequencing depth of 100×, it finds ∼88% of the breakpoints correctly with no false-positive reads. Moreover, evaluation on a real prostate cancer dataset shows that the proposed method predicts more fusion transcripts correctly than previous approaches, and yet produces fewer false-positive reads. To our knowledge, this is the first method to detect breakpoint reads without using a reference genome.

https://github.com/ewijaya/slidesort-bpr

Address of the bookmark: https://code.google.com/archive/p/slidesort-bpr/

TAREAN: A computational tool for identification and characterization of satellite DNA from unassembled short reads

Surabhi Chaudhary — Tue, 15 May 2018 02:53:11 -0500

TAndem REpeat ANalyzer -TAREAN – is a computational pipeline for unsupervised identification of satellite repeats from unassembled sequence reads. The pipeline uses low-pass whole genome sequence reads and performs their graph-based clustering. Resulting clusters, representing all types of repeats, are then examined for the presence of circular structures and putative satellite repeats are reported.

How to use TAREAN:

Install a local instance of the pipeline using its source code available from bitbucket repository.
Use public Galaxy-based server at https://repeatexplorer-elixir.cerit-sc.cz/. The server is provided in frame of the Elixir CZ project and is maintained by CESNET and CERIT-SC. Simple registration is required to use this service.

Development of TAREAN was supported by ELIXIR CZ research infrastructure project (MEYS Grant No: LM2015047).

References

Novak, P., Avila Robledillo, L., Koblizkova, A., Vrbova, I., Neumann, P., Macas, J. (2017) – TAREAN: a computational tool for identification and characterization of satellite DNA from unassembled short reads. Nucleic Acids Res., doi:10.1093/nar/gkx257

Address of the bookmark: https://bitbucket.org/petrnovak/repex_tarean

BlasR Mapping single molecule sequencing reads using Basic Local Alignment with Successive Refinement (BLASR): Theory and Application,

Jit — Wed, 23 May 2018 06:54:32 -0500

BLASR (Basic Local Alignment with Successive Refinement) for mapping Single Molecule Sequencing (SMS) reads that are thousands to tens of thousands of bases long with divergence between the read and genome dominated by insertion and deletion error.

Here is how I use the blasr to align PacBio reads to the contigs (target.fasta). The “target.fasta.sa” is the suffix array from “target.fasta” generated by sawriter.

blasr query.fa ./target.fasta -sa ./target.fasta.sa -bestn 40 -maxScore -500 -m 4 -nproc 24 -out target.m4 -maxLCPLength 15

the output format option “-m 4″ generate the alignment coordinate. Not fully documented, but I can explain that to you.

I use a 24 cores / 48G ram server for the alignment. It took about 2 to 3 hours aligning 3G PacBio Reads to 10^6 sequences of short read contigs with a mean 3.5kbp length.

Address of the bookmark: http://bix.ucsd.edu/projects/blasr/