BOL: Related items

Dashboard designing tutorial !

BioStar — Thu, 02 Mar 2023 06:48:43 -0600

Dashboard Design Tutorial

Address of the bookmark: https://github.com/dthill196/SARS-2-Dashboard-Tutorial

Single Cell RNAseq data analysis tutorial !!

Robert M Willioms — Mon, 27 Nov 2017 16:24:29 -0600

A major breakthrough (replaced microarrays) in the late 00’s and has been widely used since
Measures the average expression level for each gene across a large population of input cells
Useful for comparative transcriptomics, e.g. samples of the same tissue from different species
Useful for quantifying expression signatures from ensembles, e.g. in disease studies
Insufficient for studying heterogeneous systems, e.g. early development studies, complex tissues (brain)
Does not provide insights into the stochastic nature of gene expression

Following are the useful links:

Single Cell RNAseq data analysis Tutorial

A step-by-step workflow for low-level analysis of single-cell RNA-seq data

A step-by-step workflow for low-level analysis of single-cell RNA-seq data with Bioconductor

SCell: single-cell RNA-seq analysis software

https://github.com/diazlab/SCell

Beta-Poisson model for single-cell RNA-seq data analyses

https://github.com/nghiavtr/BPSC

Sincera: A Computational Pipeline for Single Cell RNA-Seq Profiling Analysis

https://research.cchmc.org/pbge/sincera.html

SC3 – consensus clustering of single-cell RNA-Seq data

http://biorxiv.org/content/early/2016/09/02/036558

Citrus: A toolkit for single cell sequencing analysis

http://biorxiv.org/content/early/2016/09/14/045070

Single-Cell Resolution of Temporal Gene Expression during Heart Development

http://www.cell.com/developmental-cell/fulltext/S1534-5807(16)30682-7

Scalable latent-factor models applied to single-cell RNA-seq data separate biological drivers from confounding effects

http://biorxiv.org/content/early/2016/11/15/087775

Single cell transcriptomes identify human islet cell signatures and reveal cell-type-specific expression changes in type 2 diabetes

http://genome.cshlp.org/content/early/2016/11/18/gr.212720.116.abstract

SCODE: An efficient regulatory network inference algorithm from single-cell RNA-Seq during differentiation

http://biorxiv.org/content/early/2016/11/21/088856

SCOUP is a probabilistic model to analyze single-cell expression data during differentiation

https://github.com/hmatsu1226/SCOUP

scLVM is a modelling framework for single-cell RNA-seq data

https://github.com/PMBio/scLVM

Selective Locally linear Inference of Cellular Expression Relationships (SLICER) algorithm for inferring cell trajectories

https://github.com/jw156605/SLICER

SinQC: A Method and Tool to Control Single-cell RNA-seq Data Quality

http://www.morgridge.net/SinQC.html

TSCAN: Pseudo-time reconstruction and evaluation in single-cell RNA-seq analysis

https://github.com/zji90/TSCAN

Visualization and cellular hierarchy inference of single-cell data using SPADE

http://www.nature.com/nprot/journal/v11/n7/full/nprot.2016.066.html

OEFinder: Identify ordering effect genes in single cell RNA-seq data

https://github.com/lengning/OEFinder

bioinformatics workbook

biogeek — Tue, 05 Jan 2021 22:42:32 -0600

This books assumes that the reader has some knowledge of biology and basic understanding of the Unix command line. However, for the beginner, the appendix contains introductory material and tips/tricks for common bioinformatic problems, that is referred to for more information throughout the book.

https://bioinformaticsworkbook.org/

Address of the bookmark: https://bioinformaticsworkbook.org/

Unicycler: Hybrid assembly pipeline for bacterial genomes

Jit — Fri, 10 Nov 2017 03:58:27 -0600

Unicycler is an assembly pipeline for bacterial genomes. It can assemble Illumina-only read sets where it functions as a SPAdes-optimiser. It can also assembly long-read-only sets (PacBio or Nanopore) where it runs a miniasm+Racon pipeline. For the best possible assemblies, give it both Illumina reads and long reads, and it will conduct a hybrid assembly.

Address of the bookmark: https://github.com/rrwick/Unicycler

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

transrate: Understanding your transcriptome assembly

Neel — Fri, 13 Jul 2018 07:49:26 -0500

Transrate is software for de-novo transcriptome assembly quality analysis. It examines your assembly in detail and compares it to experimental evidence such as the sequencing reads, reporting quality scores for contigs and assemblies. This allows you to choose between assemblers and parameters, filter out the bad contigs from an assembly, and help decide when to stop trying to improve the assembly.

Address of the bookmark: http://hibberdlab.com/transrate/index.html

ALLHiC: Phasing and scaffolding polyploid genomes based on Hi-C data

BioStar — Thu, 20 Dec 2018 12:03:32 -0600

The major problem of scaffolding polyploid genome is that Hi-C signals are frequently detected between allelic haplotypes and any existing stat of art Hi-C scaffolding program links the allelic haplotypes together. To solve the problem, we developed a new Hi-C scaffolding pipeline, called ALLHIC, specifically tailored to the polyploid genomes. ALLHIC pipeline contains a total of 5 steps: prune, partition, rescue, optimize and build.

Address of the bookmark: https://github.com/tangerzhang/ALLHiC/wiki

SvABA: Genome-wide detection of structural variants and indels by local assembly

Abhimanyu Singh — Mon, 21 Jan 2019 17:58:56 -0600

SvABA is a method for detecting structural variants in sequencing data using genome-wide local assembly. Under the hood, SvABA uses a custom implementation of SGA (String Graph Assembler) by Jared Simpson, and BWA-MEM by Heng Li. Contigs are assembled for every 25kb window (with some small overlap) for every region in the genome. The default is to use only clipped, discordant, unmapped and indel reads, although this can be customized to any set of reads at the command line using VariantBam rules. These contigs are then immediately aligned to the reference with BWA-MEM and parsed to identify variants. Sequencing reads are then realigned to the contigs with BWA-MEM, and variants are scored by their read support.

Address of the bookmark: https://github.com/walaj/svaba

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

MEC: Contig Misassembly Correction

BioStar — Tue, 04 Feb 2020 23:40:49 -0600

MEC, to identify and correct misassemblies in contigs. Firstly, MEC takes fragment coverage as the feature to detect the candidate misassemblies. Then, it can distinguish a large number of false positives from the candidate misassemblies based on the distribution of paired-end reads and the statistical analysis of GC-contents. We apply MEC to four real contig datasets, and carry out experiments to analyze the influence of MEC on scaffolding results, which shows that MEC can reduce misassemblies effectively and result in quantitative improvements in scaffolding quality. MEC is publicly available for download at https://github.com/bioinfomaticsCSU/MEC.

Address of the bookmark: https://github.com/bioinfomaticsCSU/MEC