BOL: Related items

GMASS: a novel measure for genomeassembly structural similarity

Abhimanyu Singh — Sun, 14 Apr 2019 20:35:40 -0500

The GMASS score is a novel measure for representing structural similarity between two assemblies. It will contribute to the understanding of assembly output and developing de novo assemblers.

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2710-z

Address of the bookmark: http://bioinfo.konkuk.ac.kr/GMASS/htdocs/syncircos.php

RefKA: A fast and efficient long-read genome assembly approach for large and complex genomes

Rahul Nayak — Fri, 01 May 2020 03:00:40 -0500

RefKA, a reference-based approach for long read genome assembly. This approach relies on breaking up a closely related reference genome into bins, aligning k-mers unique to each bin with PacBio reads, and then assembling each bin in parallel followed by a final bin-stitching step.

Address of the bookmark: https://github.com/AppliedBioinformatics/RefKA

ContigExtender: a new approach to improving de novo sequence assembly for viral metagenomics data

LEGE — Wed, 08 May 2024 07:32:45 -0500

ContigExtender, was developed to extend contigs, complementing de novo assembly. ContigExtender employs a novel recursive Overlap Layout Candidates (r-OLC) strategy that explores multiple extending paths to achieve longer and highly accurate contigs. ContigExtender is effective for extending contigs significantly in in silico synthesized and real metagenomics datasets.

More at https://www.ncbi.nlm.nih.gov/pmc/articles/PMC7953547/

Address of the bookmark: https://github.com/dengzac/contig-extender

RNA-Seq De novo Assembly Using Trinity

Surabhi Chaudhary — Wed, 23 Mar 2016 05:53:46 -0500

Trinity, developed at the Broad Institute and the Hebrew University of Jerusalem, represents a novel method for the efficient and robust de novo reconstruction of transcriptomes from RNA-seq data. Trinity combines three independent software modules: Inchworm, Chrysalis, and Butterfly, applied sequentially to process large volumes of RNA-seq reads. Trinity partitions the sequence data into many individual de Bruijn graphs, each representing the transcriptional complexity at at a given gene or locus, and then processes each graph independently to extract full-length splicing isoforms and to tease apart transcripts derived from paralogous genes. Briefly, the process works like so:

Inchworm assembles the RNA-seq data into the unique sequences of transcripts, often generating full-length transcripts for a dominant isoform, but then reports just the unique portions of alternatively spliced transcripts.
Chrysalis clusters the Inchworm contigs into clusters and constructs complete de Bruijn graphs for each cluster. Each cluster represents the full transcriptonal complexity for a given gene (or sets of genes that share sequences in common). Chrysalis then partitions the full read set among these disjoint graphs.
Butterfly then processes the individual graphs in parallel, tracing the paths that reads and pairs of reads take within the graph, ultimately reporting full-length transcripts for alternatively spliced isoforms, and teasing apart transcripts that corresponds to paralogous genes.

More at https://github.com/trinityrnaseq/trinityrnaseq/wiki

......................................................................................................................................

Download Trinity here.

Build Trinity by typing 'make' in the base installation directory.

Assemble RNA-Seq data like so:

 Trinity --seqType fq --left reads_1.fq --right reads_2.fq --CPU 6 --max_memory 20G

Find assembled transcripts as: 'trinity_out_dir/Trinity.fasta'

Address of the bookmark: https://github.com/trinityrnaseq/trinityrnaseq/wiki

RACA: Reference-Assisted Chromosome Assembly

Priya Singh — Wed, 06 Apr 2016 09:29:50 -0500

Rreference-Assisted Chromosome Assembly (RACA), an algorithm to reliably order and orient sequence scaffolds generated by NGS and assemblers into longer chromosomal fragments using comparative genome information and paired-end reads.

http://www.ncbi.nlm.nih.gov/pubmed/23307812

http://bioen-compbio.bioen.illinois.edu/RACA/

Address of the bookmark: http://bioen-compbio.bioen.illinois.edu/RACA/

CANU: Assembling Large Genomes with Single-Molecule Sequencing and Locality Sensitive Hashing.

Jit — Tue, 26 Apr 2016 11:38:10 -0500

Canu is a fork of the Celera Assembler designed for high-noise single-molecule sequencing (such as the PacBio RSII or Oxford Nanopore MinION). The software is currently alpha level, feel free to use and report issues encountered.

Canu is a hierachical assembly pipeline which runs in four steps:

Detect overlaps in high-noise sequences using MHAP
Generate corrected sequence consensus
Trim corrected sequences
Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

Redundans

Jit — Thu, 01 Sep 2016 08:28:11 -0500

Redundans pipeline assists an assembly of heterozygous genomes.
Program takes as input assembled contigs, paired-end and/or mate pairs sequencing libraries and returns scaffolded homozygous genome assembly, that should be less fragmented and with total size smaller than the input contigs. In addition, Redundans will automatically close the gaps resulting from genome assembly or scaffolding more details.

The pipeline consists of three steps/modules:

redundancy reduction: detection and selectively removal of redundant contigs from an initial de novo assembly
scaffolding: joining of genome fragments using paired-end and/or mate-pairs reads
gap closing

Redundans is:

fast & lightweight, multi-core support and memory-optimised, so it can be run even on the laptop for small-to-medium size genomes
flexible toward many sequencing technologies (Illumina, 454 or Sanger) and library types (paired-end, mate pairs, fosmids)
modular: every step can be ommited or replaced by another tools

Address of the bookmark: https://github.com/Gabaldonlab/redundans

Standardized velvet assembly report

Poonam Mahapatra — Fri, 09 Dec 2016 03:59:59 -0600

Requirements:

velvet (velveth velvetg should be in your PATH)
R (with Sweave)
pdflatex (usually part of TeTeX)
ggplot2 (from R prompt type install.packages("ggplot2","proto","xtable"))
Perl

Optional:

BLAT or BLAST (to generate alignments against a reference genome). If using BLAT, add faToTwoBit,gfClient,gfServer to your PATH. If using BLAST, add blastall and formatdb.

Edit permute.sh to your liking, paying particular attention to the kmer, cvCut, expCov, and other flags

To Run:

perl fastaAllSize mysequences.fa > mysequences.stat or gunzip -c mysequences.fa.gz | fastaAllSize > mysequences.stat Substitute fastqAllSize for fastq files.
./permute.sh mysequences (leave out the .fa)

https://github.com/leipzig/standardized-velvet-assembly-report

Address of the bookmark: https://github.com/leipzig/standardized-velvet-assembly-report

ScaffMatch

Jit — Tue, 13 Dec 2016 10:23:56 -0600

caffMatch is a novel scaffolding tool based on Maximum-Weight Matching able to produce high-quality scaffolds from NGS data (reads and contigs). The tool is written in Python 2.7. It also includes a bash script wrapper that calls aligner in case one needs to first map reads to contigs (instead of providing .sam files).

The arguments accepted by ScaffMatch are:

-w) Working directory -- this is the directory where ScaffMatch files are stored. These are .sam files produced after mapping reads to contigs and the resulting scaffolds file `scaffolds.fa` fasta file;

-c) Contig fasta file;

-m) Command line argument with no options. It is used when .sam files are used instead of reads .fastq files. Do not use this option if you provide reads files;

-1) (Comma separated list of) either .fastq or .sam file(s) corresponding to the first read of the read pair;

-2) (Comma separated list of) either .fastq or .sam file(s) corresponding to the second read of the read pair;

-i) (Comma separated list of) insert size(s) of the library(-ies);

-s) (Comma separated list of) library(-ies) standard deviation(s) of insert size(s);

-t) Bundle threshold. Pairs of contigs supported by number of read pairs less than the value of this argument are discarded. Optional argument, by default it is equal to 5;

-g) Matching heuristics: use `max_weight` for Maximum Weight Matching heuristics with the Insertion step, use `backbone` for Maximum Weight Matching heuristics without the Insertion step, use `greedy` for Greedy Matching heuristics;

-l) Log file - where to store the logs. Optional argument. By default, stdout is used.

Address of the bookmark: http://alan.cs.gsu.edu/NGS/?q=content/scaffmatch

PEAR

Jit — Mon, 19 Dec 2016 09:28:30 -0600

PEAR is an ultrafast, memory-efficient and highly accurate pair-end read merger. It is fully parallelized and can run with as low as just a few kilobytes of memory.

PEAR evaluates all possible paired-end read overlaps and without requiring the target fragment size as input. In addition, it implements a statistical test for minimizing false-positive results. Together with a highly optimized implementation, it can merge millions of paired end reads within a couple of minutes on a standard desktop computer.

Address of the bookmark: http://sco.h-its.org/exelixis/web/software/pear/doc.html