BOL: Related items

Short-read assembly using Spades !

Abhimanyu Singh — Mon, 31 Jan 2022 07:18:16 -0600

If we only had Illumina reads, we could also assemble these using the tool Spades.

You can try this here, or try it later on your own data.

Get data

We will use the same Illumina data as we used above:

illumina_R1.fastq.gz: the Illumina forward reads
illumina_R2.fastq.gz: the Illumina reverse reads

Assemble

Run Spades:

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o spades_assembly_all_illumina

-1 is input file of forward reads
-2 is input file of reverse reads
--careful minimizes mismatches and short indels
--cov-cutoff auto computes the coverage threshold (rather than the default setting, “off”)
-o is the output directory

Results

Move into the output directory and look at the contigs:

infoseq contigs.fasta

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

PANDASEQ

Shruti Paniwala — Mon, 23 Jan 2017 04:54:32 -0600

PANDASEQ assembles paired-end Illumina reads into sequences, trying to correct for errors and uncalled bases. The assembler reads two files in FASTQ format with quality information. If amplification primers were used (e.g., to isolate a variable region of the 16S gene, or the constant regions around zinc finger binding residues), they can be removed from the sequence during assembly. The final sequence will correct any uncalled bases in the overlapping region using the complementary strand. When mismatches occur in the overlapping region, the base with the better quality score is chosen.
The algorithm is as follows:

1.Find the positions where the forward and reverse primers match best above the threshold and discard the ends of the sequence, including the primer.
2.Pick and overlap to maximise the probability of the forward and reverse reads having come from a single piece of DNA.
3.Identify the masking of the end of the read with the quality score B or # as done by CASAVA and adjust the probabilities in this region.
4.Construct an assembled sequence between the primers and calculate the quality.
5.Check for various constraints, including quality, length, uncalled bases, and user-supplied modules.

http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

Address of the bookmark: http://neufeldserver.uwaterloo.ca/~apmasell/pandaseq_man1.html

CABOG: Celera Assembler with Best Overlap Graph

Abhimanyu Singh — Mon, 15 May 2017 05:04:39 -0500

CABOG (Celera Assembler with Best Overlap Graph) is scientific software for DNA research. CABOG has been a critical component of many genome sequencing projects. CABOG operates on small genomes such as bacterial as well as large genomes such as mammalian. CABOG is an extension of the Celera Assembler software that was originally developed at Celera for the 2001 publication of the first draft human genome sequence. The software was released to the public domain in 2004. Its open source repository on Source Forge is an internet resource for scientists around the world.

CABOG is one of many software programs called genome assemblers. These programs exist to overcome the fundamental limitation of all sequencing machines, namely, that they read out very few DNA letters at a time. These programs reconstruct genomes that are billions of letters long from the hundreds of letters per read that modern sequencers provide. What these programs do is often described as a scaled up version of a family solving a jigsaw puzzle.

The CABOG software was the first to accomplish many scientific goals. It was the first to assemble the genome of a multicellular organism (Drosophila melanogaster, 2000). It was the first to assemble both parental haplotypes of one human genome (J. Craig Venter, 2007). It was the first to assemble environmental sequence from the oceans (Sargasso Sea in 2004 and Global Ocean Sampling in 2007). It was first to combine reads from first-generation Sanger sequencing machines and second-generation pyrosequencing machines (Marine microbes, 2006). Today, CABOG is one of the leading assembly programs for data sets that include paired end data from the Roche 454 line of sequencing machines.

Address of the bookmark: http://www.jcvi.org/cms/research/projects/cabog/overview/

Oxford Nanopore Sequencing, Hybrid Error Correction, and de novo Assembly of a Eukaryotic Genome

Jit — Wed, 29 Nov 2017 05:08:53 -0600

Monitoring the progress of DNA molecules through a membrane pore has been postulated as a method for sequencing DNA for several decades. Recently, a nanopore-based sequencing instrument, the Oxford Nanopore MinION, has become available that we used for sequencing the S. cerevisiae genome. To make use of these data, we developed a novel open-source hybrid error correction algorithm Nanocorr (https://github.com/jgurtowski/nanocorr) specifically for Oxford Nanopore reads, as existing packages were incapable of assembling the long read lengths (5-50kbp) at such high error rate (between ~5 and 40% error). With this new method we were able to perform a hybrid error correction of the nanopore reads using complementary MiSeq data and produce a de novo assembly that is highly contiguous and accurate: the contig N50 length is more than ten-times greater than an Illumina-only assembly (678kb versus 59.9kbp), and has greater than 99.88% consensus identity when compared to the reference. Furthermore, the assembly with the long nanopore reads presents a much more complete representation of the features of the genome and correctly assembles gene cassettes, rRNAs, transposable elements, and other genomic features that were almost entirely absent in the Illumina-only assembly.

Address of the bookmark: http://schatzlab.cshl.edu/data/nanocorr/

JBrowse: Embeddable genome browser built completely with JavaScript and HTML5

Jit — Fri, 29 Jun 2018 09:19:56 -0500

JBrowse is a fast, embeddable genome browser built completely with JavaScript and HTML5, with optional run-once data formatting tools written in Perl. Headline Features: Fast, smooth scrolling and zooming. Explore your genome with unparalleled speed. Scales easily to multi-gigabase genomes and deep-coverage sequencing. Quickly open and view data files on your computer without uploading them to any server. Supports GFF3, BED, FASTA, Wiggle, BigWig, BAM, VCF (with either .tbi or .idx index), REST, and more. BAM, BigBed, BigWig, and VCF data are displayed directly from chunks of the compressed binary files, no conversion needed. Includes an optional “faceted” track selector (see demo) suitable for large installations with thousands of tracks. Very light server resource requirements. In fact, JBrowse has no back-end server code, just tools for formatting data files to be read directly over HTTP. Serve huge datasets from a single low-cost cloud instance. Can run as a stand-alone app on OSX and Windows using the Electron platform Highly extensible plugin architecture, with a large plugin registry of existing examples here https://gmod.github.io/jbrowse-registry https://jbrowse.org/

Address of the bookmark: https://github.com/GMOD/jbrowse

Evaluation of genome assembly software based on long reads

BioStar — Fri, 01 Feb 2019 11:55:54 -0600

TGS technologies have been used to produce highly accurate de novo assemblies of hundreds of microbial genomes and highly contiguous reconstructions of many dozens of plant and animal genomes, enabling new insights into evolution and sequence diversity. They have also been applied to resequencing analyses, to create detailed maps of structural variations in many species. Also, these new technologies have been used to fill in many of the gaps in the human reference genome.

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

splitbam: splits a BAM by chromosomes

Jit — Tue, 28 Feb 2017 09:01:28 -0600

splitbam splits a BAM by chromosomes.

Using the reference sequence dictionary (*.dict), it also creates some empty BAM files if no sam record was found for a chromosome. A pair of 'mock' SAM-Records can also be added to those empty BAMs to avoid some tools (like samtools) to crash.

Usage

java -jar splitbam.jar -p OUT/__CHROM__/__CHROM__.bam -R ref.fasta (bam|sam|stdin)

Options

-h help; This screen.
-R (indexed reference file) REQUIRED.
-u (unmapped chromosome name): default:Unmapped
-e | --empty : generate EMPTY bams for chromosome having no read mapped
-m | --mock : if option '-e', add a mock pair of sam records to the empty bam
-p (output file/bam pattern) REQUIRED. MUST contain __CHROM__ and end with .bam
-s assume input is sorted.
-x | --index create index.
-t | --tmp (dir) tmp file directory
-G (file) chrom-group file (see below)

Address of the bookmark: https://code.google.com/archive/p/jvarkit/wikis/SplitBam.wiki

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Jit — Fri, 04 May 2018 19:16:22 -0500

Flye is a de novo assembler for long and noisy reads, such as those produced by PacBio and Oxford Nanopore Technologies. The algorithm uses an A-Bruijn graph to find the overlaps between reads and does not require them to be error-corrected. After the initial assembly, Flye performs an extra repeat classification and analysis step to improve the structural accuracy of the resulting sequence. The package also includes a polisher module, which produces the final assembly of high nucleotide-level quality.

Address of the bookmark: https://github.com/fenderglass/Flye