BOL: Related items

LoRMA: A tool for correcting sequencing errors in long reads

Abhimanyu Singh — Thu, 06 Sep 2018 16:21:01 -0500

An error correction method that uses long reads only. The method consists of two phases: first, we use an iterative alignment-free correction method based on de Bruijn graphs with increasing length of k-mers, and second, the corrected reads are further polished using long-distance dependencies that are found using multiple alignments. According to our experiments, the proposed method is the most accurate one relying on long reads only for read sets with high coverage. Furthermore, when the coverage of the read set is at least 75×, the throughput of the new method is at least 20% higher.

conda install -c atgc-montpellier lorma

Address of the bookmark: https://gite.lirmm.fr/lorma/lorma-releases/wikis/home

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Neel — Tue, 27 Nov 2018 03:38:49 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Reasons to use Deepbinner:
- To minimise the number of unclassified reads (use Deepbinner by itself).
- To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
- You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
Reasons to not use Deepbinner:
- You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
- You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
- You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

Filtlong: quality filtering tool for long reads

Radha Agarkar — Wed, 13 May 2020 10:23:55 -0500

Filtlong is a tool for filtering long reads by quality. It can take a set of long reads and produce a smaller, better subset. It uses both read length (longer is better) and read identity (higher is better) when choosing which reads pass the filter.

Filtlong builds into a stand-alone executable:

git clone https://github.com/rrwick/Filtlong.git
cd Filtlong
make -j
bin/filtlong -h

Address of the bookmark: https://github.com/rrwick/Filtlong

Hifiasm: a haplotype-resolved assembler for accurate Hifi reads

Jit — Thu, 24 Dec 2020 10:03:36 -0600

Hifiasm is a fast haplotype-resolved de novo assembler for PacBio Hifi reads. It can assemble a human genome in several hours and works with the California redwood genome, one of the most complex genomes sequenced so far. Hifiasm can produce primary/alternate assemblies of quality competitive with the best assemblers. It also introduces a new graph binning algorithm and achieves the best haplotype-resolved assembly given trio data.

Address of the bookmark: https://github.com/chhylp123/hifiasm

Bioinformatics tools for telomere to telomere assembly !

BioStar — Tue, 17 Aug 2021 13:17:09 -0500

● Merfin – k-mer-based assembly and variant calling evaluation for improved consensus accuracy (Arang Rhie)
● PanGenie – algorithm that leverages a pangenome reference built from haplotype-resolved genome assemblies in conjunction with k-mer count information from raw, short-read sequencing data to genotype a wide spectrum of genetic variation (Tobias Marschall)
● SQANTI3 – an automated pipeline for the classification of long-read transcripts that can assess the quality of data and the preprocessing pipeline (Rocío Amorín de Hegedüs @rocioadh)
● tama (Transcriptome Annotation by Modular Algorithms) – software designed for processing Iso-Seq data and other long-read transcriptome data (Richard Kuo @GenomeRIK)
● pbaa (PacBio Amplicon Analysis) – separates complex mixtures of amplicon targets from genomic samples to cluster and generate high-quality consensus sequences from HiFi reads (Zev Kronenberg @zevkronenberg)
● bellerophon – analyzes MHC typing and other low-complexity gene amplicon data; performs allele calling while detecting polymorphic sites within the sequences and removing potential chimeric sequence variants (Yuanyuan Cheng @Yuanyuan929)
● svpack – tools for filtering, comparing, and annotating structural variant (SV) calls in VCF format (Aaron Wenger)
● JumboDB – tool for de Bruijn graph construction (Anton Bankevich @AntonBankevich)
● uLTRA – tool for splice alignment of long transcriptomic reads to a genome, guided by a database of exon annotations. (Kristoffer Sahlin @krsahlin)
● LeafGo – workflow to rapidly produce high-quality de novo plant genomes (Luca Ermini @ermini_luca)

Reference:

https://www.pacb.com/blog/young-investigators-share-stellar-science-career-advice-and-bioinformatics-tools-at-smrt-leiden-2021/

Stacks

Jitendra Narayan — Wed, 24 Feb 2016 15:52:30 -0600

Stacks is a software pipeline for building loci from short-read sequences, such as those generated on the Illumina platform. Stacks was developed to work with restriction enzyme-based data, such as RAD-seq, for the purpose of building genetic maps and conducting population genomics and phylogeography.

More at http://catchenlab.life.illinois.edu/stacks/

Address of the bookmark: http://catchenlab.life.illinois.edu/stacks/

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba

Common steps for reads mapping !

BioStar — Thu, 09 Mar 2023 02:48:02 -0600

Mapping reads to a reference genome is an essential step in many types of genomic analysis, such as variant calling and gene expression analysis. Here are some general steps to follow for mapping reads to a genome:

Choose a read mapper: There are many read mappers available, such as BWA, Bowtie, and HISAT2. Choose a mapper that is appropriate for your type of data and research question.
Index the reference genome: Before mapping reads, the reference genome needs to be indexed. This involves creating an index of the genome sequence that allows the mapper to quickly find matches to the reads. Most mappers have their own indexing tools.
Prepare the read data: The reads should be in a format that is compatible with the mapper. Most mappers accept FASTQ or BAM files. Depending on the quality of the data, it may need to be filtered or trimmed before mapping.
Run the mapper: The mapper is run with the command-line interface or using a graphical user interface. The specific command depends on the mapper being used, but typically involves specifying the input data, reference genome, and output file format.
Evaluate the mapping results: After the mapping is complete, the results should be evaluated. This includes assessing the quality of the mapping, such as the mapping rate, the number of mapped reads, and the mapping quality score.
Post-processing: Depending on the analysis being performed, post-processing of the mapped reads may be necessary. This can include filtering reads based on quality, removing duplicate reads, and calling variants.

Overall, mapping reads to a reference genome is a complex process that requires careful consideration of the type of data, the research question, and the specific mapper being used.