BOL: Related items

ART: Set of Simulation Tools

Jit — Thu, 03 Nov 2016 08:28:25 -0500

ART is a set of simulation tools to generate synthetic next-generation sequencing reads. ART simulates sequencing reads by mimicking real sequencing process with empirical error models or quality profiles summarized from large recalibrated sequencing data. ART can also simulate reads using user own read error model or quality profiles. ART supports simulation of single-end, paired-end/mate-pair reads of three major commercial next-generation sequencing platforms: Illumina's Solexa, Roche's 454 and Applied Biosystems' SOLiD. ART can be used to test or benchmark a variety of method or tools for next-generation sequencing data analysis, including read alignment, de novo assembly, SNP and structure variation discovery. ART was used as a primary tool for the simulation study of the 1000 Genomes Project . ART is implemented in C++ with optimized algorithms and is highly efficient in read simulation. ART outputs reads in the FASTQ format, and alignments in the ALN format. ART can also generate alignments in the SAM alignment or UCSC BED file format. ART can be used together with genome variants simulators (e.g. VarSim) for evaluating variant calling tools or methods.

Address of the bookmark: http://www.niehs.nih.gov/research/resources/software/biostatistics/art/

Jabba: Hybrid Error Correction for Long Sequencing Reads

Jit — Fri, 05 Jan 2018 03:58:14 -0600

Jabba is a hybrid error correction tool to correct third generation (PacBio / ONT) sequencing data, using second generation (Illumina) data.

Input

Jabba takes as input a concatenated de Bruijn graph and a set of sequences:

the de Bruijn graph should appear in fasta format with 1 entry per node, the meta information should be in the format:
>NODE
the set of sequences should be in fasta or fastq format. These sequences will be corrected (e.g. PacBio reads). The corrections will be written to a file Jabba fasta.
The output is a file in fasta format with corrections of the long reads, and additionally a file in the input format containing uncorrected reads.

https://github.com/biointec/jabba/wiki

https://almob.biomedcentral.com/articles/10.1186/s13015-016-0075-7

Address of the bookmark: https://github.com/biointec/jabba

Common steps for reads mapping !

BioStar — Thu, 09 Mar 2023 02:48:02 -0600

Mapping reads to a reference genome is an essential step in many types of genomic analysis, such as variant calling and gene expression analysis. Here are some general steps to follow for mapping reads to a genome:

Choose a read mapper: There are many read mappers available, such as BWA, Bowtie, and HISAT2. Choose a mapper that is appropriate for your type of data and research question.
Index the reference genome: Before mapping reads, the reference genome needs to be indexed. This involves creating an index of the genome sequence that allows the mapper to quickly find matches to the reads. Most mappers have their own indexing tools.
Prepare the read data: The reads should be in a format that is compatible with the mapper. Most mappers accept FASTQ or BAM files. Depending on the quality of the data, it may need to be filtered or trimmed before mapping.
Run the mapper: The mapper is run with the command-line interface or using a graphical user interface. The specific command depends on the mapper being used, but typically involves specifying the input data, reference genome, and output file format.
Evaluate the mapping results: After the mapping is complete, the results should be evaluated. This includes assessing the quality of the mapping, such as the mapping rate, the number of mapped reads, and the mapping quality score.
Post-processing: Depending on the analysis being performed, post-processing of the mapped reads may be necessary. This can include filtering reads based on quality, removing duplicate reads, and calling variants.

Overall, mapping reads to a reference genome is a complex process that requires careful consideration of the type of data, the research question, and the specific mapper being used.

Unicycler: Hybrid assembly pipeline for bacterial genomes

Jit — Fri, 10 Nov 2017 03:58:27 -0600

Unicycler is an assembly pipeline for bacterial genomes. It can assemble Illumina-only read sets where it functions as a SPAdes-optimiser. It can also assembly long-read-only sets (PacBio or Nanopore) where it runs a miniasm+Racon pipeline. For the best possible assemblies, give it both Illumina reads and long reads, and it will conduct a hybrid assembly.

Address of the bookmark: https://github.com/rrwick/Unicycler

HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies

Jit — Tue, 15 May 2018 07:35:26 -0500

HapCUT2 is a maximum-likelihood-based tool for assembling haplotypes from DNA sequence reads, designed to "just work" with excellent speed and accuracy. We found that previously described haplotype assembly methods are specialized for specific read technologies or protocols, with slow or inaccurate performance on others. With this in mind, HapCUT2 is designed for speed and accuracy across diverse sequencing technologies, including but not limited to: NGS short reads (Illumina HiSeq) clone-based sequencing (Fosmid or BAC clones) SMRT reads (PacBio) Oxford Nanopore reads 10X Genomics Linked-Reads proximity-ligation (Hi-C) reads high-coverage sequencing (>40x coverage-per-SNP) using above technologies combinations of the above technologies (e.g. scaffold long reads with Hi-C reads) See below for specific examples of command line options and best practices for some of these technologies. NOTE: At this time HapCUT2 is for diploid organisms only. VCF input should contain diploid variants. If you use HapCUT2 in your research, please cite: Edge, P., Bafna, V. & Bansal, V. HapCUT2: robust and accurate haplotype assembly for diverse sequencing technologies. Genome Res. gr.213462.116 (2016). doi:10.1101/gr.213462.116

Address of the bookmark: https://github.com/vibansal/HapCUT2

transrate: Understanding your transcriptome assembly

Neel — Fri, 13 Jul 2018 07:49:26 -0500

Transrate is software for de-novo transcriptome assembly quality analysis. It examines your assembly in detail and compares it to experimental evidence such as the sequencing reads, reporting quality scores for contigs and assemblies. This allows you to choose between assemblers and parameters, filter out the bad contigs from an assembly, and help decide when to stop trying to improve the assembly.

Address of the bookmark: http://hibberdlab.com/transrate/index.html

ALLHiC: Phasing and scaffolding polyploid genomes based on Hi-C data

BioStar — Thu, 20 Dec 2018 12:03:32 -0600

The major problem of scaffolding polyploid genome is that Hi-C signals are frequently detected between allelic haplotypes and any existing stat of art Hi-C scaffolding program links the allelic haplotypes together. To solve the problem, we developed a new Hi-C scaffolding pipeline, called ALLHIC, specifically tailored to the polyploid genomes. ALLHIC pipeline contains a total of 5 steps: prune, partition, rescue, optimize and build.

Address of the bookmark: https://github.com/tangerzhang/ALLHiC/wiki

SvABA: Genome-wide detection of structural variants and indels by local assembly

Abhimanyu Singh — Mon, 21 Jan 2019 17:58:56 -0600

SvABA is a method for detecting structural variants in sequencing data using genome-wide local assembly. Under the hood, SvABA uses a custom implementation of SGA (String Graph Assembler) by Jared Simpson, and BWA-MEM by Heng Li. Contigs are assembled for every 25kb window (with some small overlap) for every region in the genome. The default is to use only clipped, discordant, unmapped and indel reads, although this can be customized to any set of reads at the command line using VariantBam rules. These contigs are then immediately aligned to the reference with BWA-MEM and parsed to identify variants. Sequencing reads are then realigned to the contigs with BWA-MEM, and variants are scored by their read support.

Address of the bookmark: https://github.com/walaj/svaba

MEC: Contig Misassembly Correction

BioStar — Tue, 04 Feb 2020 23:40:49 -0600

MEC, to identify and correct misassemblies in contigs. Firstly, MEC takes fragment coverage as the feature to detect the candidate misassemblies. Then, it can distinguish a large number of false positives from the candidate misassemblies based on the distribution of paired-end reads and the statistical analysis of GC-contents. We apply MEC to four real contig datasets, and carry out experiments to analyze the influence of MEC on scaffolding results, which shows that MEC can reduce misassemblies effectively and result in quantitative improvements in scaffolding quality. MEC is publicly available for download at https://github.com/bioinfomaticsCSU/MEC.

Address of the bookmark: https://github.com/bioinfomaticsCSU/MEC

SvABA: Structural variation and indel detection by local assembly

Jit — Tue, 10 Mar 2020 07:52:15 -0500

Address of the bookmark: https://github.com/walaj/svaba