BOL: Related items

Illumina to Acquire Pacific Biosciences for Approximately $1.2 Billion !

Rahul Nayak — Fri, 02 Nov 2018 09:57:48 -0500

Illumina and Pacific Biosciences announced they have signed an agreement for Illumina to acquire Pacific Biosciences at a price of $8.00 per Pacific Biosciences share in an all-cash transaction.

The agreement has been approved by the board of directors of Illumina and Pacific Biosciences. The acquisition complements Illumina sequencing solutions with accurate long-read sequencing capabilities to answer a set of complex genomic questions. While Illumina's accurate and economic short-read sequencing platforms address the majority of sequencing applications optimally, select applications, such as de novo sequencing and sequencing of highly homologous regions of genomes, are better addressed with accurate long-reads.

Reference https://www.pacb.com/press_releases/illumina-to-acquire-pacific-biosciences-for-approximately-1-2-billion-broadening-access-to-long-read-sequencing-and-accelerating-scientific-discovery/

High Density Sheep SNP Genotyping Chip released!!!

Rahul Agarwal — Tue, 03 Sep 2013 13:58:04 -0500

If you are working on Sheep genomics then there is a good news for you. FarmIQ in conjunction with Illumina and the International Sheep Genomics Consortium (ISGC) are today announcing completion of the “Ovine Infinium® HD SNP BeadChip”, a high definition SNP chip for ship genome. The OvineSNP50 BeadChip features over 54,241 evenly spaced probes that target SNPs, offering more than sufficient SNP density for genome-wide association studies and other applications such as genome-wide selection, determination of genetic merit, identification of quantitative trait loci, and comparative genetic studies.

The BeadChip was developed in collaboration with leading ovine researchers from AgResearch, Baylor UCSC, CSIRO, and the USDA as part of the International Sheep Genomics Consortium. It features over 54,241 evenly spaced probes that target single nucleotide polymorphisms (SNPs). More than 18,000 of these markers were discovered through sequencing reduced representation libraries with the Illumina Genome Analyzer IIx. A set of 600 SNPs were identified by BAC end sequencing and validated with Illumina GoldenGate Genotyping Assays over 403 animals from 23 breeds. The remaining SNPs were derived from the draft ovine genome.

Run miniasm assembler on nanopore reads !

Jit — Mon, 18 Dec 2017 04:07:50 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

Find the detail of the reads repeats:

fq2fa ONT_A.fastq ONT_A.fasta

minimap2 -xava-ont ONT_A.fasta ONT_A.fasta -t10 -X > AONT.paf

awk '{if($1==$6){print}}' AONT.paf > AONTself.paf

awk '$5=="-"' AONTself.paf | awk '{print $1}'| sort|uniq > invertedrepeat.list

Generated a few palindrome and repeats plots (highlighting only repeats largest than 10, 20 and 30 kb)

minidot -f 5 -m 30000 AONTself.paf > AONTself30000.eps
sed 's/_template_pass_FAH31515//' AONTself30000.eps > AONTself30000final.eps

minidot -f 5 -m 20000 AONTself.paf > AONTself20000.eps
sed 's/_template_pass_FAH31515//' AONTself20000.eps > AONTself20000final.eps

minidot -f 5 -m 10000 AONTself.paf > AONTself10000.eps
sed 's/_template_pass_FAH31515//' AONTself10000.eps > AONTself10000final.eps

Assemble with miniasm:

miniasm -f ONT_A.fasta AONT.paf > AONT.gfa
grep '^S' AONT.gfa |awk '{print ">"$2"\n"$3}' > AONT_miniasm.fasta

minimap2 -xasm10 AONT_miniasm.fasta AONT_miniasm.fasta -t1 -X > AONT_miniasm.paf

awk '{if($1==$6){print}}' AONT_miniasm.paf > AONT_miniasm_self.paf

minidot -f 5 -m 10000 AONT_miniasm_self.paf > AONT_miniasm_self10000.eps

Njoy the assembly !

Frequent Paired-end reads (PE 2x100) mapping command lines

Jit — Tue, 15 May 2018 08:59:29 -0500

bowtie2 -x hs37m -X 650 -q -1 r1.fq -2 r2.fq -S r12.bowtie2.sam

bwa aln hs37m.fa r1.fq > r1.sai && bwa aln hs37m.fa r2.fq > r2.sai \
&& bwa sampe hs37m r1.sai r2.sai r1.fq r2.fq > r12.bwa.sam

bwa bwasw ../index/bwa/hs37m.fa r12.fq > r12.bwasw.sam

gsnap -A sam -d hs37m r1.fq r2.fq > r12.gsnap.sam

novoalign -r Random -o SAM -f r1.fq r2.fq -i 500 50 -d hs37m-k14s3.novo > r12.novo.sam

smalt map -f samsoft -i 650 -o r12.smalt-k20s13.sam hs37m-k20s13 r1.fq r2.fq

stampy.py -g hs37m -h hs37m -o r12.stampy.sam -M r1.fq,r2.fq

soap -D hs37m.fa.index -a r1.fq -b r2.fq -l 32 -g 3 -u dummy -2 dummy -o r12.soap

GenomeMapper: Simultaneous alignment of short reads against multiple genomes

Jit — Fri, 25 May 2018 09:29:44 -0500

GenomeMapper is a short read mapping tool designed for accurate read alignments. It quickly aligns millions of reads either with ungapped or gapped alignments. It can be used to align against multiple genomes simulanteously or against a single reference. If you are unsure which one is the appropriate GenomeMapper, you might want to use the latter https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2768987/

Address of the bookmark: http://1001genomes.org/software/genomemapper.html

ReMILO: reference assisted misassembly detection algorithm using short and long reads.

Jit — Fri, 06 Jul 2018 04:27:49 -0500

ReMILO, a reference assisted misassembly detection algorithm that uses both short reads and PacBio SMRT long reads. ReMILO aligns the initial short reads to both the contigs and reference genome, and then constructs a novel data structure called red-black multipositional de Bruijn graph to detect misassemblies. In addition, ReMILO also aligns the contigs to long reads and find their differences from the long reads to detect more misassemblies.

Address of the bookmark: https://github.com/songc001/remilo

SimLoRD: A read simulator for third generation sequencing reads

Aaryan Lokwani — Wed, 22 Aug 2018 10:40:27 -0500

SimLoRD is a read simulator for third generation sequencing reads and is currently focused on the Pacific Biosciences SMRT error model.

Reads are simulated from both strands of a provided or randomly generated reference sequence.

The reference can be read from a FASTA file or randomly generated with a given GC content. It can consist of several chromosomes, whose structure is respected when drawing reads. (Simulation of genome rearrangements may be incorporated at a later stage.)
The read lengths can be determined in four ways: drawing from a log-normal distribution (typical for genomic DNA), sampling from an existing FASTQ file (typical for RNA), sampling from a a text file with integers (RNA), or using a fixed length
Quality values and number of passes depend on fragment length.
Provided subread error probabilities are modified according to number of passes
Outputs reads in FASTQ format and alignments in SAM format

Address of the bookmark: https://bitbucket.org/genomeinformatics/simlord/

Rainbow: an integrated tool for efficient clustering and assembling RAD-seq reads

Rahul Nayak — Fri, 19 Oct 2018 08:23:42 -0500

Rainbow is developed to provide an ultra-fast and memory-efficient solution to clustering and assembling short reads produced by RAD-seq. First, Rainbow clusters reads using a spaced seed method. Then, Rainbow implements a heterozygote calling like strategy to divide potential groups into haplotypes in a top–down manner. And along a guided tree, it iteratively merges sibling leaves in a bottom–up manner if they are similar enough. Here, the similarity is defined by comparing the 2nd reads of a RAD segment. This approach tries to collapse heterozygote while discriminate repetitive sequences. At last, Rainbow uses a greedy algorithm to locally assemble merged reads into contigs. Rainbow not only outputs the optimal but also suboptimal assembly results. Based on simulation and a real guppy RAD-seq data, we show that Rainbow is more competent than the other tools in dealing with RAD-seq data

Address of the bookmark: https://sourceforge.net/projects/bio-rainbow/files/

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Jit — Mon, 10 Feb 2020 02:45:53 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Address of the bookmark: https://github.com/rrwick/Deepbinner

SqueezeMeta: a fully automated metagenomics pipeline, from reads to bins

BioStar — Mon, 17 Aug 2020 05:25:10 -0500

SqueezeMeta is a full automatic pipeline for metagenomics/metatranscriptomics, covering all steps of the analysis. SqueezeMeta includes multi-metagenome support allowing the co-assembly of related metagenomes and the retrieval of individual genomes via binning procedures. Thus, SqueezeMeta features several unique characteristics:

Co-assembly procedure with read mapping for estimation of the abundances of genes in each metagenome
Co-assembly of a large number of metagenomes via merging of individual metagenomes
Includes binning and bin checking, for retrieving individual genomes
The results are stored in a database, where they can be easily exported and shared, and can be inspected anywhere using a web interface.
Internal checks for the assembly and binning steps inform about the consistency of contigs and bins, allowing to spot potential chimeras.
Metatranscriptomic support via mapping of cDNA reads against reference metagenomes

Address of the bookmark: https://github.com/jtamames/SqueezeMeta