The fellowship will be for a period of 3 years, or for a period of 4 years, with 25 % compulsory work (e.g. teaching responsibilities at the department) contingent on the qualifications of the candidate and the teaching needs of the department.

Starting date no later than October 1, 2021.

More at https://www.jobbnorge.no/en/available-jobs/job/199984/phd-research-fellow-in-genomics-and-bioinformatics

Like other indel callers, Scalpel works by performing de novo assembly of regions of interest, so that misalignment to the reference genome cannot obscure the presence of an insertion or deletion. Scalpel's innovation is to repeatedly check its assembly before comparing to the reference genome, to account for simple sequence repeats that are a regular source of error in indel calling. When Scalpel assembles an exon, it collects reads that map to that exon (including partial matches), splits them into k-mers, and creates a de Bruijn graph to span the exon; however, if it detects repeats in the map, it iteratively increases the size of the k-mers by one base until the repeats are eliminated. This ensures that the final assembly of the exon is highly accurate while minimizing compute time.

The Cold Spring Harbor team's validation of Scalpel, published over the weekend in Nature Methods, compares Scalpel's performance on a live whole exome against HaplotypeCaller and SOAPindel. The donor is an individual with serious neurological disorders, which may be linked to a high incidence of indels. One thousand indels from this individual's exome, called by one or more of the informatics pipelines, were selected for focused resequencing. This resequencing revealed a 77% true positive rate for Scalpel calls, dramatically better than the rates for either of the competing tools; Scalpel performed especially well with indels longer than five base pairs, a traditional weak point for indel callers.

Finally, the authors demonstrate Scalpel's use on a large set of genetic data from nearly 600 families who donated samples to the Simons Simplex Collection, a project of the Simons Foundation Autism Research Initiative. Scalpel found a very high enrichment for indels in children affected by autism, compared with their unaffected siblings, a pattern that persisted even after excluding common variants.

More at sandbox.bio

Address of the bookmark: http://sandbox.bio

• In a GitHub or GitLab repository
• Free to use
• Written in markdown or similar

NOTE: This list of courses is selected only based on the above criteria.
There are no checks on quality.

https://glittr.org/?per_page=25&sort_by=stargazers&sort_direction=desc

Address of the bookmark: https://glittr.org/?per_page=25&sort_by=stargazers&sort_direction=desc

1. NCBI (National Center for Biotechnology Information):

   • NCBI provides various databases related to genetic information, including 16S rRNA sequences.
   • You can access the 16S ribosomal RNA sequences from NCBI's Nucleotide database (https://www.ncbi.nlm.nih.gov/nucleotide/).
   • Perform a search using keywords like "16S rRNA" or specific bacterial names to find relevant sequences.
   • You can download sequences individually or in batches using the provided tools.

2. GreenGenes:

   • GreenGenes is a widely used 16S rRNA gene sequence database.
   • You can access it at http://greengenes.secondgenome.com/.
   • GreenGenes provides precompiled databases for various purposes, including classification, alignment, and phylogenetic analysis.

3. SILVA:

   • SILVA (https://www.arb-silva.de/) is another comprehensive database for ribosomal RNA (rRNA) sequences.
   • It covers not only 16S rRNA but also other ribosomal RNA sequences.
   • SILVA provides precompiled databases for various purposes, including taxonomic classification and alignment.

4. Ribosomal Database Project (RDP):

   • RDP (http://rdp.cme.msu.edu/) is a curated database that offers 16S rRNA sequences.
   • It provides tools for sequence analysis and classification.
   • You can download sequences and taxonomy information from their website.

5. QIIME (Quantitative Insights Into Microbial Ecology):

   • QIIME (https://qiime2.org/) is a widely used bioinformatics platform for microbiome analysis.
   • It provides tools for analyzing microbial communities, including processing 16S rRNA sequences.
   • QIIME often includes its own preprocessed 16S rRNA databases that can be used for analysis within the platform.

Before downloading any database, make sure to read the terms of use and citation requirements, as some databases may have specific usage policies. Additionally, consider the compatibility of the database with your analysis pipeline and software tools.

NCBI 16s RNA database location ftp://ftp.ncbi.nih.gov/blast/db/16SMicrobial.tar.gz

Research Area:
pancreatic cancer; ovarian cancer; prostate cancer; bowel cancer; brain cancer; endometrial cancer; breast cancer; personalised medicine; high-throughput genomics

Link @ http://www.imb.uq.edu.au/sean-grimmond

Selected Topics:

Cluster Dynamics
Non-equilibrium Statistical Mechanics
Forced Systems
Hamiltonian Dynamics
Synchronization & Control
Genomics & Systems Biology
Computational Neuroscience
Econophysics

More @ http://www.jnu.ac.in/Conference/SCS2013/

Research Area

Developmental biology, Computational biology, Simulation modeling, Image data analysis

Link @ http://mysite.science.uottawa.ca/arolland/index.html

Can't locate XML/parser.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/vendor_perl
/usr/lib/perl5/site_perl/5.10.0 .)

Manual Method of Perl Module Installation

• Install Perl Modules Manually

This manual method is very useful when your computer or server is not connected to the Internet.

Download Perl module:
Go to CPAN Search website and search for the module that you wish to download. In this example, let us search, download and install XML::Parser Perl module. I have downloaded the XML-Parser-2.36.tar.gz to /home/download

# cd /home/download
# gzip -d XML-Parser-2.36.tar.gz
# tar xvf XML-Parser-2.36.tar
# cd XML-Parser-2.36

Build the perl module:
Build by running Makefile.PL, remember the case sensitivity, make and make test.

# perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for XML::Parser::Expat
Writing Makefile for XML::Parser
# make
# make test

Install the perl module:
Now your package is ready to install.

# make install

As a newbie it looks pretty simple, and one go. But, luckily this is a very simple one module with no dependencies. Typically, Perl modules will be dependent on several other modules. Just imagine chasing all these dependencies one-by-one, thinking ... oh ye I got it. That will be very painful and annoying task. I recommend the CPAN method of installation as shown below.

Install Perl Modules using CPAN automatically

Logically, you should must have the CPAN perl module installed in your server or computer before you can install any other Perl modules using CPAN. I know you  are laughing, "to install a perl module you need another perl module"  ;)

Lets verify whether CPAN is already installed:

To install Perl modules using CPAN, make sure the cpan command is working. Following are the error message when CPAN module is not installed.

# cpan
-bash: cpan: command not found

# perl -MCPAN -e shell
Can't locate CPAN.pm in @INC (@INC contains:
/usr/lib/perl5/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/5.10.0
/usr/local/lib/perl5/site_perl/5.10.0/i386-linux-thread-multi
/usr/local/lib/perl5/site_perl/5.10.0
/usr/lib/perl5/vendor_perl/5.10.0/i386-linux-thread-multi
/usr/lib/perl5/vendor_perl/5.10.0
/usr/lib/perl5/vendor_perl /usr/lib/perl5/site_perl/5.10.0 .).
BEGIN failed--compilation aborted.

Install the CPAN module using yum:
If CPAN in not installed in your system, you can use "yum" for the rescue. Dont worry biological data cruncher, this is true we are now dependent all these tiny magicians :).

# yum install perl-CPAN

Output of yum install perl-CPAN command:

Loaded plugins: refresh-packagekit
updates-newkey                       | 2.3 kB     00:00
primary.sqlite.bz2                   | 2.4 MB     00:00
Setting up Install Process
Parsing package install arguments

Resolving Dependencies
Transaction Summary
=============================================================================
Install      5 Package(s)
Update       0 Package(s)
Remove       0 Package(s)

Total download size: 1.0 M
Is this ok [y/N]: y
Downloading Packages:
(1/5): perl-ExtUtils-ParseXS-2.18-31.fc9.i386.rpm     |  30 kB     00:00
(2/5): perl-Test-Harness-2.64-31.fc9.i386.rpm         |  70 kB     00:00
(3/5): perl-CPAN-1.9205-31.fc9.i386.rpm               | 217 kB     00:00
(4/5): perl-ExtUtils-MakeMaker-6.36-31.fc9.i386.rpm   | 284 kB     00:00
(5/5): perl-devel-5.10.0-31.fc9.i386.rpm              | 408 kB     00:00

Installing     : perl-ExtUtils-ParseXS                             [1/5]
Installing     : perl-devel                                        [2/5]
Installing     : perl-Test-Harness                                 [3/5]
Installing     : perl-ExtUtils-MakeMaker                           [4/5]
Installing     : perl-CPAN                                         [5/5]


Installed: perl-CPAN.i386 0:1.9205-31.fc9
Dependency Installed:
  perl-ExtUtils-MakeMaker.i386 0:6.36-31.fc9
  perl-ExtUtils-ParseXS.i386 1:2.18-31.fc9
  perl-Test-Harness.i386 0:2.64-31.fc9
  perl-devel.i386 4:5.10.0-31.fc9
Complete!

Configure cpan the first time:
Once the CPAN is installed, you need to configure it by executing cpan, you should set some configuration parameters as shown below. I have shown only the important configuration parameters below. Accept all the default values by pressing enter.

Note: Make sure to execute “o conf commit” in the cpan prompt after the configuration to save the settings.

# cpan

Sorry, we have to rerun the configuration dialog for CPAN.pm due
to some missing parameters...

CPAN build and cache directory? [/root/.cpan]
Download target directory? [/root/.cpan/sources]
Directory where the build process takes place? [/root/.cpan/build]

Always commit changes to config variables to disk? [no]
Cache size for build directory (in MB)? [100]
Let the index expire after how many days? [1]

Perform cache scanning (atstart or never)? [atstart]
Cache metadata (yes/no)? [yes]
Policy on building prerequisites (follow, ask or ignore)? [ask]

Parameters for the 'perl Makefile.PL' command? []
Parameters for the 'perl Build.PL' command? []

Your ftp_proxy? []
Your http_proxy? []
Your no_proxy? []
Is it OK to try to connect to the Internet? [yes]

First, pick a nearby continent and country by typing in the number(s)
(1) Africa
(2) Asia
(3) Central America
(4) Europe
(5) North America
(6) Oceania
(7) South America
Select your continent (or several nearby continents) [] 5

(1) Bahamas
(2) Canada
(3) Mexico
(4) United States
Select your country (or several nearby countries) [] 4

(2) ftp://carroll.cac.psu.edu/pub/CPAN/
(3) ftp://cpan-du.viaverio.com/pub/CPAN/
(4) ftp://cpan-sj.viaverio.com/pub/CPAN/
(5) ftp://cpan.calvin.edu/pub/CPAN
(6) ftp://cpan.cs.utah.edu/pub/CPAN/
e.g. '1 4 5' or '7 1-4 8' [] 2-16

cpan[1]> o conf commit
commit: wrote '/usr/lib/perl5/5.10.0/CPAN/Config.pm'

cpan[2]> quit
No history written (no histfile specified).
Lockfile removed.

• Install Perl Modules using CPAN

Hey smile please, now you are ready with CPAN and can download modules in one line command.

You can use one of the following method to install a Perl module using cpan:

# perl -MCPAN -e 'install Bundle::BioPerl'

(or)

# cpan
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support available (maybe install Bundle::CPAN or Bundle::CPANxxl?)

cpan[1]> install "Bundle::BioPerl"

In the example above, CPAN will check for Bundle::BioPerl dependencies and automatically resolves and installs Bundle::BioPerl with all the dependent Perl modules.

• Quick Ways

Oh, look at your face.. smily hmm :). This is what your are looking for, a quick and best way to install Perl modules, Bioperl. Following are the the steps to download BioPerl in your server/computer.

# sudo apt-cache search perl BioPerl

Output will be like as follows:

bioperl - Perl tools for computational molecular biology
bioperl-run - BioPerl wrappers: scripts
libbio-perl-perl - BioPerl core perl modules
libbio-perl-run-perl - BioPerl wrappers: modules
libbio-samtools-perl - Perl interface to SamTools library for DNA sequencing
libbiojava-java - Java API to biological data and applications (default version)
libbiojava3-java - Java API to biological data and applications (default version)
python-biopython-sql - Biopython support for the BioSQL database schema
libbtlib-perl - library for basic sequence manipulation

# sudo apt-get install bioperl

If it is installed then flash the following message:

Reading package lists... Done
Building dependency tree      
Reading state information... Done
bioperl is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 10 not upgraded.

In it is found not installed in your server or system them install all with dependencies.

You can use the same approach to install all the modules, and packages if required.

Thanks for reading. Best of luck for your research.

http://ritg.med.harvard.edu/training/perl/RC_Perl_Intro.pdf