1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

More at http://hgdownload.cse.ucsc.edu/admin/exe/

Address of the bookmark: http://hgdownload.cse.ucsc.edu/admin/exe/

Canu is a hierachical assembly pipeline which runs in four steps:

• Detect overlaps in high-noise sequences using MHAP
• Generate corrected sequence consensus
• Trim corrected sequences
• Assemble trimmed corrected sequences

Read the documentation

New release https://github.com/marbl/canu/releases

Address of the bookmark: https://github.com/marbl/canu

• exteremely fast (17 CPU hours for whole Human x Mouse genome (with 40 nodes: 35 wall minutes), or 8 mammals in 21 CPU hours (42 wall minutes))
• scalable (Arbitrarily parallelizable across multiple nodes using MPI)
• memory efficient. (Even a single node with 16GB of ram can handle over 1Gbp of sequence)
• unlimited by pattern length or selection
• repeat tolerant

Address of the bookmark: http://murasaki.dna.bio.keio.ac.jp/wiki/index.php?Murasaki

Features

• Circular and linear views of genomes

• Capable of drawing genomes up to 10 Mbp with 1000's of features and 100's contigs

• Smooth zooming down to the sequence level

• Easily generate features and plots directly form the sequence (e.g. ORFs, GC-content and GC-Skew)

• Save high resolution PNG maps up to 8000x8000px

• Fully documented API for interacting with CGView.js maps

Address of the bookmark: https://js.cgview.ca/

Adapter sequences:
Optimal enzymes for amplifying sequencing libraries.
Quail, M. a et al. Nat. Methods 9, 10-1 (2012).

GAGE:
GAGE: A critical evaluation of genome assemblies and assembly algorithms.
Salzberg, S. L. et al. Genome Res. 22, 557-67 (2012).

KMC:
Disk-based k-mer counting on a PC.
Deorowicz, S., Debudaj-Grabysz, A. & Grabowski, S. BMC Bioinformatics 14, 160 (2013).

Kraken:
Kraken: ultrafast metagenomic sequence classification using exact alignments.
Wood, D. E. & Salzberg, S. L. Genome Biol. 15, R46 (2014).

MUMmer:
Versatile and open software for comparing large genomes.
Kurtz, S. et al. Genome Biol. 5, R12 (2004).

R:
R: A language and environment for statistical computing.
R Core Team (2013). R Foundation for Statistical Computing, Vienna, Austria. URL http://www.R-project.org/.

RATT:
RATT: Rapid Annotation Transfer Tool.
Otto, T. D., Dillon, G. P., Degrave, W. S. & Berriman, M. Nucleic Acids Res. 39, e57 (2011).

SAMtools:
The Sequence Alignment/Map format and SAMtools.
Li, H. et al. Bioinformatics 25, 2078-9 (2009).

Trimmomatic:
Trimmomatic: A flexible trimmer for Illumina Sequence Data.
Bolger, A. M., Lohse, M. & Usadel, B. Bioinformatics 1-7 (2014).

In the mid 1960's scientists discovered that many genomes contain stretches of highly repetitive DNA sequences ( see Reassociation Kinetics Experiments, and C-Value Paradox ). These sequences were later characterized and placed into five categories:

Simple Repeats - Duplications of simple sets of DNA bases (typically 1-5bp) such as A, CA, CGG etc.
Tandem Repeats - Typically found at the centromeres and telomeres of chromosomes these are duplications of more complex 100-200 base sequences.
Segmental Duplications - Large blocks of 10-300 kilobases which are that have been copied to another region of the genome.
Interspersed Repeats
Processed Pseudogenes, Retrotranscripts, SINES - Non-functional copies of RNA genes which have been reintegrated into the genome with the assitance of a reverse transcriptase.
DNA Transposons
Retrovirus Retrotransposons
Non-Retrovirus Retrotransposons ( LINES )

Currently up to 50% of the human genome is repetitive in nature and as improvements are made in detection methods this number is expected to increase.

On the other hand; In genetics, the term palindrome refers to a sequence of nucleotides along a DNA (deoxyribonucleic acid) or RNA (ribonucleic acid) strand that contains the same series of nitrogenous bases regardless from which direction the strand is analyzed. Akin to a language palindrome—wherein a word or phrase is spelled the same left-to-right as right-to-left (e.g., the word RADAR or the phrase "able was I ere I saw elba")—with genetic palindromes it does not matter whether the nucleic acid strand is read starting from the 3' (three prime) end or the 5' (five prime) end of the strand.

Recent research on palindromes centers on understanding palindrome formation during gene amplification. Other studies have attempted to relate palindrome formation to molecular mechanisms involved in double stranded breaks and in the formation of inverted repeats. Assisted by high speed computers, other groups of scientists link palindrome formation to the conservation of genetic information.

Related to the direction of transcription by RNA polymerase, DNA strands have upstream and downstream terminus defined by differing chemical groups at each end. The ends of each strand of DNA or RNA are termed the 5' (phosphate bound to the 5' position carbon) and 3' (phosphate bound to the 3' carbon) ends to indicate a polarity within the molecule. Using the letters A, T, C, G, to represent the nitrogenous bases adenine, thymine, cytosine, and guanine found in DNA, and the letters A, U, C, G to represent the nitrogenous bases adenine, uracil, cytosine, guanine found in RNA (Note that uracil in RNA replaces the thymine found in DNA), geneticists usually represent DNA by a series of base codes (e.g., 5' AATCGGATTGCA 3'). The base codes are usually arranged from the 5' end to the 3' end.

Because of specific base pairing in DNA (i.e., adenine (A) always bonds with (thymine (T) and cytosine (C) always bonds with guanine (G)) the complimentary stand to the sequence 5' AATCGGATTGCA 3' would be 3' TTAGCCTAACGT 5'.

With palindromes the sequences on the complimentary strands read the same in either direction. For example, a sequence of 5' GAATTC3' on one strand would be complimented by a 3' CTTAAG 5' strand. In either case, when either strand is read from the 5' prime end the sequence is GAATTC. Another example of a palindrome would be the sequence 5' CGAAGC 3' that, when reversed, still reads CGAAGC.

Palindromes are important sequences within nucleic acids. Often they are the site of binding for specific enzymes (e.g., restriction endobucleases) designed to cut the DNA strands at specific locations (i.e., at palindromes).

Palindromes may arise from brakeage and chromosomal inversions that form inverted repeats that compliment each other. When a palindrome results from an inversion, it is often referred to as an inverted repeat. For example, the sequence 5' CGAAGC 3', if inverted (reversed 180°), still reads CGAAGC.

The European Molecular Biology Open Software Suite (EMBOSS) includes some basic tools for finding tandem repeats and inverted repeats (see B.6.22. Applications in group Nucleic:repeats). There are many on-line services providing the EMBOSS tools, for example:

• Wageningen Bioinformatics Webportal EMBOSS explorer
• Mobyle@Pasteur
• Soaplab2 Web Services at Vital-IT

For more sophisticated repeat finding you will want to look at tools using Repbase for example:

• CENSOR
  • CENSOR@GIRI
  • CENSOR@EMBL-EBI
• RepeatMasker
• MUMmer (scan_for_match)
• Emboss Palindrome

Other nucleotide repeat finding methods found by a couple of web searches:

• Tandem Repeats Finder
• RECON
• RepeatRunner
• REPuter
• Imperfect Microsatellite Extractor (IMEx)
• Spectral Repeat Finder (SRF)
• REPFIND
• CRISPRfinder
• GrailEXP
• CONREPP
• find_palindromes
• Palindrome
• EMBOSS Palindrome
• Palindrome Search

3D-Dock Suite

Global rigid search: FFTShape complementarity and electrostatics

Re-scoring and clustering. Refinement of interface side-chains

3D-Garden

Global rigid search in ensamble

Shape complementarity and Lennard–Jones potential

Side chain and backbone dihedral refinement

DOT

Global rigid search: FFTShape complementarity, electrostatics and VDWNone

Escher NG

Global rigid searchShape complementarity, hydrogen bonds and electrostatic

Integrated in VEGA

GRAMM 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potential

Clustering of conformations

GRAMM-X 

Global rigid search: FFT. smooth protein surface representation for soft docking

Shape complementarity and Lennard-Jones potentialminimization and re-scoring with multiple filters

HEX

Global rigid search: Fourier correlation of spherical harmonics

Shape complementarity

HADDOCK

Global rigid searchElectrostatic ,VDW and desolvation energy termsMD simulated annealing refinement . Filtering based on external data. 

ICM

Global rigid search: Monte CarloEmpirical scoring function

Clustering and selection of conformations. Refinement of interface side-chains and re-scoring

MolFit 

Global rigid search: FFTShape complementarity

Clustering of good solutions, filtering using a priori information and small, local rigid rotations around selected conformations

PatchDock

Global rigid searchShape complementarity and atomic desolvation energy

Clustering of conformations

PyDock

Global rigid search:FFTShape complementarity

rescoring by binding electrostatics and desolvation energy

RosettaDock

Local rigid search: Monte Carlo with low and high resolution structure representation levels

Different scoring parameters for the different resolutions 

ZDOCK

Global rigid search: FFTShape complementarity, desolvation energy, and electrostatics.

Energy minimization and re-scoringFree for academics

Point to note:

The proper treatment of flexibility in protein–protein docking is still an active field of research. You first should analyzed your proteins in order to define their conformational space and then choose the most suitable method for your docking problem.

Address of the bookmark: https://www.molinspiration.com/

To cite Mugsy, use:

Angiuoli SV and Salzberg SL. Mugsy: Fast multiple alignment of closely related whole genomes.Bioinformatics 2011 27(3):334-4

Address of the bookmark: http://mugsy.sourceforge.net/