BOL: Related items

The 8000 years old Tibetian gene mutation !!!

Neel — Wed, 20 Aug 2014 21:57:44 -0500

A new study has provided insight into how gene mutation around 8,000 years ago helped Tibetans' to survive in the thin air on the Tibetan Plateau, where an average elevation is of 14,800 feet.

A study led by University of Utah scientists is the first to find a genetic cause for the adaptation, a single DNA base pair change that dates back 8,000 years and demonstrate how it contributes to the Tibetans' ability to live in low oxygen conditions.

About 8,000 years ago, the gene EGLN1 changed by a single DNA base pair. Today, a relatively short time later on the scale of human history, 88 percent of Tibetans have the genetic variation, and it was virtually absent from closely related lowland Asians. The findings indicate the genetic variation endows its carriers with an advantage.

In those without the adaptation, low oxygen caused their blood to become thick with oxygen-carrying red blood cells, an attempt to feed starved tissues, which could cause long-term complications such as heart failure. The researchers found that the newly identified genetic variation protected Tibetans by decreasing the over-response to low oxygen.

Reference: http://www.nature.com/nature/journal/v512/n7513/abs/nature13408.html

Assistant Professor - Medical Bioinformatics

Wed, 23 Jul 2014 05:00:38 -0500

Advt. No : ME-I/A-IV/03/14

No.of Posts:01 (SC)

Pay Scale:

Pay Band of Rs.15600-39100 + Rs.6000/- GP +NPA @ 25% of Basic Pay +Learning Resource Allowance @ Rs.20,000/-P.A.+ Conveyance Allowance @ Rs. 1650/-P.M.+ Academic Allowance @ Rs.2500/- P.M. and other admissible allowances.

Qualifications:

Area of Specialization:-

Bioinformatics/Computational/Biology/Genomics/ Proteomics/ Structural Biology

1. Postgraduate qualification, e.g. Master’s Degree in Biotechnology/Bioinformatics/ Biophysics.

2. A Doctorate Degree of recognized University/Institute in a basic or allied Medical Science subject e.g. Medical Biotechnology/Biophysics. Bioinformatics/X-ray Crystallography/

Immunology/Structural Biology etc

Experience:

1.Minimum three years teaching and/or research experience in a recognized medical/research Institution in an allied medical subject after obtaining doctorate degree and preferably in Medical

Molecular Biology/ Biophysics/Structural Biology/Genomics and Clinical Proteomics/Computational Biology.

2. Minimum two publication with atleast one in international journal and atleast one as first author

Desirable:-

Consistently excellent scholastic/academic record, demonstrated ability to write grant proposal/(s) successfully, Post Doctoral training in a frontier area of medical Bioinformatics Research and of direct relevance to clinical diagnosis or patient care (preferably from a recognized top-ranking medical institution abroad)

Send your applications to O/O, Deputy Registrar, Recruitment & Establishment Cell, University of Health Sciences, Rohtak by 08.7.2014

For more details,please visit website:http://pgimsrohtak.nic.in/2014%20AP%20Advt.pdf

GenoViz: Visualization software for genomics

Rahul Nayak — Wed, 02 Jan 2019 04:07:57 -0600

GenoViz provides software applications and re-usable components for data visualization and data sharing in genomics. Our flagship product is Integrated Genome Browser (IGB).

For more information about IGB, visit http://bioviz.org.

Source code for the project was hosted here for many years. In 2014, we moved to a new git repository at http://www.bitbucket.org/lorainelab/integrated-genome-browser. We are still using SourceForge to distribute new releases of IGB as compiled code (igb.zip) you can use to run IGB on your computer.

If you have questions, feel free to get in touch. Contact project head Ann Loraine (aloraine@uncc.edu) or lead developer David Norris (dcnorris@uncc.edu>).

Address of the bookmark: https://sourceforge.net/projects/genoviz/

The 5 reasons to mistakes at bioinformatics work !!!

Jit — Thu, 24 Jul 2014 02:51:41 -0500

When you're just starting out with biological programming, it's easy to run into complex problems that make you wonder how anyone has ever managed to write a program. There are some problems that trip up nearly every bioinformatician--everything from getting started understanding the biological problems to dealing with program design. Some random mistakes are so prominent that even experienced biological programmers do it. The 8 years in bioinformatics and my few random observations, most of them are snarky. These reasons will always take longer than expected and compel you to postpone your project deadline.

1.Stupid for biologist: Biology is so complex that it will make bioinformatician feel stupid. There are no any universal fixed rules; it can surprise you any time. So be nice to biologists who ask questions and resolve your biological puzzles. Sometime you will have no idea what the hell you were doing either.

2.Puzzling why: Do not hesitate to ask question. Especially. at the beginning of project you will have to ask a lot of questions. Instead of puzzling it out at end check out and clear your doubt even for a single error. It may can leads to wrong conclusion.

3.Running marathon: The most of the biological software’s documentation is always incomplete. In other word they are no more than 95 percent complete. Sometime a single problem can halt your entire project for months. Compilation and running the pipelines in tedious because almost all are interdependent and need proper configuration. I face the same kind of problem with Evolver :( …

4.Folders missing: The pipelines generate lots of data, and we keep them in several folders for future use. But sometime we delete them by mistake and move to recovery…

5.Digging deeper: Digging deeper is fruitful, but some time it can be catastrophic. You may get frustrated or direction less. So keep a biologist with you for rescue …. Sometime an expert computer programmer to handle your server. Remember, the server will always go down when you need it the most.

The most common frustrating common line: Why do we do this again?

Juicebox: Visualization and analysis software for Hi-C data

Jit — Fri, 21 Feb 2020 00:33:38 -0600

Juicebox is visualization software for Hi-C data. This distribution includes the source code for Juicebox, Juicer Tools, and Assembly Tools. Download Juicebox here, or use Juicebox on the web. Detailed documentation is available on the wiki. Instructions below pertain primarily to usage of command line tools and the Juicebox jar files.

Juicebox can now be used to visualize and interactively (re)assemble genomes. Check out the Juicebox Assembly Tools Module website https://aidenlab.org/assembly for more details on how to use Juicebox for assembly.

GUI at https://aidenlab.org/juicebox/

Address of the bookmark: https://github.com/aidenlab/Juicebox

PhD opportunity at Université de Liège - Belgium

Sat, 02 Aug 2014 01:12:43 -0500

PhD opportunity at Université de Liège - Belgium

The Bioinformatics and Systems Biology Unit of Université de Liège (Belgium) is looking for a highly motivated master student with programming skills for a PhD thesis project (4 years, fully funded) with the goal of designing computational tools that use literature, genomic and structural data in order to infer regulatory and metabolic networks.

Applicants are invited to send their resume and a recommendation letter to Prof. Patrick Meyer (more details at www.biosys.ulg.ac.be )

For more information : www.biosys.ulg.ac.be

MEGADOCK 4.0

Suleman Khan — Thu, 07 Aug 2014 18:08:54 -0500

An ultra–high-performance protein–protein docking software for heterogeneous supercomputers

Summary: The application of protein–protein docking in large-scale interactome analysis is a major challenge in structural bioinformatics and requires huge computing resources. In this work, we present MEGADOCK 4.0, an FFT-based docking software that makes extensive use of recent heterogeneous supercomputers and shows powerful, scalable performance of over 97% strong scaling.

Availability and Implementation: MEGADOCK 4.0 is written in C++ with OpenMPI and NVIDIA CUDA 5.0 (or later) and is freely available to all academic and non-profit users at: http://www.bi.cs.titech.ac.jp/megadock.

Contact: akiyama@cs.titech.ac.jp

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/08/06/bioinformatics.btu532.short

OMArk: software for proteome (protein-coding gene repertoire) quality assessment

LEGE — Wed, 21 Feb 2024 15:01:20 -0600

OMArk is a software for proteome (protein-coding gene repertoire) quality assessment. It provides measures of proteome completeness, characterizes the consistency of all protein coding genes with regard to their homologs, and identifies the presence of contamination from other species. OMArk relies on the OMA orthology database, from which it exploits orthology relationships, and on the OMAmer software for fast placement of all proteins into gene families.

Address of the bookmark: https://github.com/DessimozLab/OMArk

GrapheR !!!

John Parker — Thu, 14 Aug 2014 14:02:17 -0500

What a wonderful gem GrapheR is.... Oh yes it is. GrapheR is a GUI for base graphics in R by http://www.maximeherve.com/. The package provides a graphical user interface for creating base charts in R. It is ideal for beginners in R, as the user interface is very clear and the code is written along side into a text file, allowing users to recreate the charts directly in the console.

Adding and changing legends? Messing around with the plotting window settings? It is much easier/quicker with this GUI than reading the help file and trying to understand the various parameters.
Here is a little example using the iris data set.

library(GrapheR)
data(iris)
run.GrapheR()

This will bring up a window that helps me to create the chart and tweak the various parameters.

Finally, I find the underlying R code in a file created by GrapheR. For more details read also the package vignette, which is available in English, French and German!

Tools and Method for Haplotype phasing !

Manisha Mishra — Fri, 04 Sep 2020 20:41:40 -0500

Huge amounts of genotype data are being produced with recent technological advances, both from increasingly comprehensive and inexpensive genome-wide SNP microarrays and from ever more accessible whole-genome and whole-exome sequencing methods. The vast amount of knowledge contained in these results, however, is best exploited through phased haplotypes, which classify the alleles co-located on the same chromosome. Since sequence and SNP array data normally take the form of unphased genotypes, one does not specifically observe which of the two parental chromosomes, or haplotypes, falls on a specific allele. Fortunately, new advances in both computational and laboratory methods promise improved determination of haplotype phase. Following are useful tools :

Arlequin: http://cmpg.unibe.ch/software/arlequin3/

BEAGLE: http://faculty.washington.edu/browning/beagle/beagle.html

fastPHASE: http://stephenslab.uchicago.edu/software.html

GENEHUNTER: http://linkage.rockefeller.edu/soft/gh/

The Genome Analysis Toolkit:

http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit

IMPUTE2: https://mathgen.stats.ox.ac.uk/impute/impute_v2.html

MACH: http://www.sph.umich.edu/csg/abecasis/MACH/

MERLIN: http://www.sph.umich.edu/csg/abecasis/Merlin/

PHASE: http://stephenslab.uchicago.edu/software.html

PL-EM: http://www.people.fas.harvard.edu/~junliu/plem/

“Read-backed phasing” algorithm: http://www.broadinstitute.org/gsa/wiki/index.php/Read-backed_phasing_algorithm

SHAPE-IT: http://www.griv.org/shapeit/