BOL: Related items

CrocoBLAST: Optimized parallel implementation of local sequence alignment algorithms

Jit — Tue, 25 Jul 2017 05:03:10 -0500

Local sequence alignment is a cornerstone of bioinformatics, allowing to compare the amino-acid sequences of different proteins, or the nucleotide sequences of different pieces of DNA. The Basic Local Alignment Search Tool (BLAST) has revolutionized the field of bioinformatics, and is currently implemented in all free and commercial bioinformatics packages. However, with the advent of Next Generation Sequencing (NGS) and the development of new sequencing techniques, the utility of traditional BLAST implementations is limited. CrocoBLAST combines the accuracy and general applicability of BLAST with computational efficiency, accessibility, and user experience, so that NGS data can be analyzed efficiently even when only modest computational resources are available.

https://webchem.ncbr.muni.cz/Platform/App/CrocoBLAST

Address of the bookmark: https://webchem.ncbr.muni.cz/Platform/App/CrocoBLAST

Ancestral sequence reconstruction steps !

Surabhi Chaudhary — Fri, 18 May 2018 08:28:26 -0500

Ancestral sequence reconstruction (ASR) – also known as ancestral gene/sequence reconstruction/resurrection – is a technique used in the study of molecular evolution. The method consists of the synthesis of an ancestral gene and expression of the corresponding ancestral protein. The idea of protein 'resurrection' was suggested in 1963 by Pauling and Zuckerkandl. Some early efforts were made in the eighties-nineties, led by the laboratory of Steven A. Benner, showing the potential of this technique – one that only started to be fulfilled in the post-genomic era. Thanks to the improvement of algorithms and of better sequencing and synthesis techniques, the method was developed further in the early 2000s to allow the resurrection of a greater variety of and much more ancient genes. Over the last decade, ancestral protein resurrection has developed as a strategy to reveal the mechanisms and dynamics of protein evolution.

BEAST is the best way to predict the ancestral structure. but, I suggest following steps?

1- Alignments "Mafft - http://mafft.cbrc.jp/alignment/software/source.html"

mafft --maxiterate 1000 --reorder --thread 24 --genafpair Dataset.fasta > Dataset_Alig.fasta

2- Your dataset has a good phylogenetic signal, is possible to perform with Tree-Puzzle "http://www.tree-puzzle.de";

3 - This dataset which the saturation index, I perform with "http://dambe.bio.uottawa.ca/dambe.asp";

4- Has evidence of possible recombination in your dataset, the evaluate if this presence or absence, because this may to influence the grouping of clades, I perform with

---recombination

4.1- Phi-test, implemented in SplitTree4"http://www.splitstree.org", (.nex file)

4.2- GARD deployed in webserver in the DataMonkey "http://www.datamonkey.org/" - turning to the amino acid seaview -> view proteins -> save as ...) Ideally do a tree-based groups.

4.3- RDP4 for download and installation on Windows in "http://web.cbio.uct.ac.za/~darren/rdp.html"

4.4- Hyphy (Mac, Windows, Linux) in "http://hyphy.org/w/index.php/Download"

4.5- Path-o-Gen (temporal structure of a tree input file -> arquivo.tre)

These steps above, I call of pre-processing to inferences phylogenetic...

5- Perform phylogenetic tree, used Bayesian Inference with Molecular Clock, but is necessary Clock Testing:

- This step is performed with program Beast (Beauti, Beast and TreeAnnotator), and Tracer_v1.5 more FigTree to inspection.

- Tutorials: http://beast.bio.ed.ac.uk/tutorials

- Downloads: http://beast.bio.ed.ac.uk/downloads

Genome sequence-based (sub-)species delineation.

Abhimanyu Singh — Wed, 12 Dec 2018 08:31:14 -0600

The GGDC web service reports digital DDH for a universal and accurate delineation of prokaryotic (sub-)species without inheriting the pitfalls of classic DDH, and also calculates differences in genomic G+C content.

http://ggdc.dsmz.de/ggdc_background.php#

Genome-to-Genome Distance Calculator 2.1

http://ggdc.dsmz.de/ggdc.php

Address of the bookmark: http://ggdc.dsmz.de/

Apollo: a sequence annotation editor

Abhimanyu Singh — Tue, 27 Aug 2019 08:08:47 -0500

The well-established inaccuracy of purely computational methods for annotating genome sequences necessitates an interactive tool to allow biological experts to refine these approximations by viewing and independently evaluating the data supporting each annotation. Apollo was developed to meet this need, enabling curators to inspect genome annotations closely and edit them

Address of the bookmark: https://genomebiology.biomedcentral.com/articles/10.1186/gb-2002-3-12-research0082

GfaViz: flexible and interactive visualization of GFA sequence graphs

Jit — Thu, 23 Jan 2020 07:33:46 -0600

GFA (Graphical Fragment Assembly) is an emerging standard format for representing sequence graphs. Although it was originally conceived as a format for sequence assembly (hence the name), and this remains its core application, it is more general, and able to represent many different types of sequence graphs, including scaffolding graphs, alignment graphs, variant graphs and splicing graphs.

Address of the bookmark: https://github.com/ggonnella/gfaviz

China’s BGI says it can sequence a genome for just $100

Neel — Sat, 29 Feb 2020 04:49:43 -0600

Using technology originally acquired in the US, the Chinese gene giant BGI Group says it will make genome sequencing cheaper than ever, breaking the $100 barrier for the first time.

The Shenzhen company says the low cost will be possible with an “extreme” DNA sequencing system it plans to offer that is capable of decoding the genomes of 100,000 people a year.

Ref: https://www.technologyreview.com/s/615289/china-bgi-100-dollar-genome/

Kmer: a suite of tools for DNA sequence analysis

BioStar — Wed, 18 Aug 2021 00:02:54 -0500

More at https://help.rc.ufl.edu/doc/Kmer

This also includes:

A2Amapper: ATAC, Assembly to Assembly Comparision tool:
- Comparative mapping between two genome assemblies (same species), or between two different genomes (cross species).

Sim4db:
- Spliced alignment of cDNA and genomic sequences, from the same (sim4) or related (sim4cc) species. Optimized for high-throughput batched alignment.

LEAFF:
- LEAFF (ahem, Let's Extract Anything From Fasta) is a utility program for working with multi-fasta files. In addition to providing random access to the base level, it includes several analysis functions.

Meryl:
- An out-of-core k-mer counter. The amount of sequence that can be processed for any size k depends only on the amount of free disk space.

Address of the bookmark: https://help.rc.ufl.edu/doc/Kmer

dcGOR

Martin Jones — Sat, 08 Nov 2014 14:54:28 -0600

An R package for analysing ontologies and protein domain annotations has been published in PLoS Computational Biology (http://dx.doi.org/10.1371/journal.pcbi.1003929). The package is distributed as part of CRAN (http://cran.r-project.org/package=dcGOR), and also at GitHub for version control.

The dedicated website is available in http://supfam.org/dcGOR, from which several demos are also provided:

1. Analysing SCOP domains: http://supfam.org/dcGOR/demo-Fang.html

2. Analysing Pfam domains: http://supfam.org/dcGOR/demo-Basu.html

3. Analysing InterPro domains: http://supfam.org/dcGOR/demo-Customisation.html

ORFfinder with smart BLAST

Jit — Tue, 17 May 2016 01:43:15 -0500

ORF Finder

ORFfinder is a graphical analysis tool for finding open reading frames (ORFs). We’ve been working on a few updates, and we’d like to find out what you think about them. Read on to find out what you can do with the new ORFfinder.

Smart BLAST (https://ncbiinsights.ncbi.nlm.nih.gov/2015/07/29/smartblast/)

Select one or a group of ORFs and BLAST several databases at once, and use the newly developed SmartBLAST to verify protein names. Looking for the traditional results from BLAST? They’re there too.

BBMap/BBTools package: Multipurpose tool designed for converting reads or other nucleotide data between different formats.

Jit — Mon, 13 Jun 2016 05:47:21 -0500

Reformatis a member of the BBMap/BBTools package. It is a multipurpose tool designed for converting reads or other nucleotide data between different formats. It supports, and can inter-convert:

fastq
fasta
fasta+qual
sam
scarf (an old Illumina format)
bam (if samtools is installed)
gzip
zip
ascii-33 (sanger)
ascii-64 (old Illumina)
paired files
interleaved files

It is multithreaded and can process data at over 500 megabytes per second, and can accept streams from standard in and write to standard out, allowing it to be easily dropped into the middle of a pipeline for format conversion. Reformat autodetects formats based on file extensions and content, making it very easy to use; and the autodetection can be overridden, allowing flexibility for people who don't like to follow naming conventions, or out-of-spec fastq files with qualities values like -17 or 120.

The program has been gradually expanded, and can now perform various other functions. None of these will break pairing, if the input is paired.

Quality trimming (either or both ends)
Quality filtering
Fixed-length trimming
Generation of histograms (base composition, quality, etc)
Subsampling (to a fraction of input reads, or an exact number of reads or bases)
Changing fasta line-wrapping length
Reverse-complementing (all reads or only read 2)
Adding /1 and /2 suffix to read names
GC-content filtering
Length-filtering
Testing for corrupted interleaved files

Reformat is compatible with any platform that supports Java 1.7 or higher. It also has a bash shellscript for simpler invocation. Typical usage examples:

Reformat fastq into fasta:
reformat.sh in=x.fq out=y.fa

Interleave paired reads:
reformat.sh in1=x1.fq in2=x2.fq out=y.fq

Note - you can actually use a shortcut if paired read files have the same name with a 1 and a 2. This is equivalent to the above command:
reformat.sh in=x#.fq out=y.fq

De-interleave reads:
reformat.sh in=x.fq out1=y1.fq out2=y2.fq

Verify that interleaving appears correct, assuming Illumina namimg conventions:
reformat.sh in=x.fq vint

Convert ASCII-33 to ASCII-64:
reformat.sh in=x.fq out=y.fq qin=33 qout=64

Quality-trim paired reads to Q10 on the left and right ends and discard reads shorter than 50bp after trimming:
reformat.sh in1=x1.fq in2=x2.fq out1=y1.fq out2=y2.fq outsingle=singletons.fq qtrim=rl trimq=10 minlength=50

Subsample 10% of the first 20000 pairs in an interleaved file:
reformat.sh in=x.fq out=y.fq reads=20000 samplerate=0.1 int=t
(in this case "int=t" overrides interleaving autodetection, to ensure reads are treated as pairs)

Pipe in a gzipped sam file and pipe out fasta:
reformat.sh in=stdin.sam.gz out=stdout.fa

Reverse-complement reads:
reformat.sh in=x.fq out=y.fq rcomp

For reformatting a file with very long sequences, Reformat will need more memory; just add the additional flag "-Xmx2g". For example, to change the line-wrapping length on the human genome (which has individual sequences over 200Mbp long) to 70 characters:
reformat.sh -Xmx2g in=HG19.fa.gz out=HG19_wrapped.fa.gz fastawrap=70

For additional functions, please run the shellscript with no arguments, or just read it with a text editor. If you have any questions, please post them in this thread.

For people using a non-bash terminal, you may need to type "bash reformat.sh" instead of just "reformat.sh".
For users of Windows or other platforms that do not support bash shellscripts, replace "reformat.sh" with "java -ea -Xmx200m /path/to/bbmap/current/ jgi.ReformatReads"
for example,
java -ea -Xmx200m C:\bbmap\current\ jgi.ReformatReads in=x.fq out=y.fa

Reformat can be downloaded with BBTools here:
https://sourceforge.net/projects/bbmap/