BOL: Related items

BFC: a standalone high-performance tool for correcting sequencing errors from Illumina sequencing data

Jit — Thu, 31 May 2018 09:35:23 -0500

BFC is a standalone high-performance tool for correcting sequencing errors from Illumina sequencing data. It is specifically designed for high-coverage whole-genome human data, though also performs well for small genomes. The BFC algorithm is a variant of the classical spectrum alignment algorithm introduced by Pevzner et al (2001). It uses an exhaustive search to find a k-mer path through a read that minimizes a heuristic objective function jointly considering penalties on correction, quality and k-mer support. This algorithm was first implemented in my fermi assembler and then refined a few times in fermi, fermi2 and now in BFC. In the k-mer counting phase, BFC uses a blocked bloom filter to filter out most singleton k-mers and keeps the rest in a hash table (Melsted and Pritchard, 2011). The use of bloom filter is how BFC is named, though other correctors such as Lighter and Bless actually rely more on bloom filter than BFC. https://github.com/lh3/bfc

Address of the bookmark: https://github.com/lh3/bfc

LoFreq*: A sequence-quality aware, ultra-sensitive variant caller for NGS data

BioStar — Tue, 18 Feb 2020 03:24:22 -0600

LoFreq* (i.e. LoFreq version 2) is a fast and sensitive variant-caller for inferring SNVs and indels from next-generation sequencing data. It makes full use of base-call qualities and other sources of errors inherent in sequencing (e.g. mapping or base/indel alignment uncertainty), which are usually ignored by other methods or only used for filtering.

https://github.com/CSB5/lofreq

http://csb5.github.io/lofreq/installation/

https://github.com/CSB5/lofreq/tree/master/dist

Address of the bookmark: http://csb5.github.io/lofreq/

Submit your SARS-CoV-2 sequence data to GenBank

Neel — Thu, 09 Apr 2020 18:28:25 -0500

Submit your SARS-CoV-2 sequence data to GenBank and SRA with our new submission landing page. Submission is simple and streamlined *and* there’s a rapid turnaround. https://submit.ncbi.nlm.nih.gov/sarscov2/

Quickly and easily add your SARS-CoV-2 sequence data to the growing public archive with new, special features and support from NCBI. new SARS-CoV-2 sequence submission landing page will help you get started. GenBank submissions are accessioned and released in approximately 1-2 working days, and Sequence Read Archive (SRA) submissions typically processed and released within hours. Submission is simple!

More information is available on NCBI Insights. https://ncbiinsights.ncbi.nlm.nih.gov/2020/04/09/sars-cov2-data-streamlined-submission-rapid-turnaround/

Figeno: Tool for plotting sequencing data along genomic coordinates.

LEGE — Tue, 17 Sep 2024 02:28:15 -0500

Tool for plotting sequencing data along genomic coordinates.

FIGENO is a
  FIGure
    GENerator
for GENOmics

With figeno, you can plot various types of sequencing data along genomic coordinates. Video overview: https://www.youtube.com/watch?v=h1cBeXoSYTA.

Address of the bookmark: https://github.com/CompEpigen/figeno

minialign: fast and accurate alignment tool for PacBio and Nanopore long reads

Jit — Thu, 24 May 2018 08:33:26 -0500

Minialign is a little bit fast and moderately accurate nucleotide sequence alignment tool designed for PacBio and Nanopore long reads. It is built on three key algorithms, minimizer-based index of the minimap overlapper, array-based seed chaining, and SIMD-parallel Smith-Waterman-Gotoh extension.

Address of the bookmark: https://github.com/ocxtal/minialign

LoRMA: A tool for correcting sequencing errors in long reads

Abhimanyu Singh — Thu, 06 Sep 2018 16:21:01 -0500

An error correction method that uses long reads only. The method consists of two phases: first, we use an iterative alignment-free correction method based on de Bruijn graphs with increasing length of k-mers, and second, the corrected reads are further polished using long-distance dependencies that are found using multiple alignments. According to our experiments, the proposed method is the most accurate one relying on long reads only for read sets with high coverage. Furthermore, when the coverage of the read set is at least 75×, the throughput of the new method is at least 20% higher.

conda install -c atgc-montpellier lorma

Address of the bookmark: https://gite.lirmm.fr/lorma/lorma-releases/wikis/home

Software and Tools to detect structure variation with long reads !!

Archana Malhotra — Wed, 15 Mar 2017 14:31:09 -0500

Uncovering the connection between genetics and heritable diseases requires an approach that looks at all the variant bases and types in a genome. While a PacBio de novo assembly resolves the most novel SV variants. 8-10X PacBio coverage of single genomes or trios reveals triple the SVs detectable by short-read data.

With Single Molecule, Real-Time (SMRT) Sequencing, you can access structural variations having a broad range of sizes, types, and GC content with the ability to:

Uncover missing heritability linked to structural variation
Unambiguously identify genomic context and variant breakpoints at the sequence level to unravel the genetic etiology of disease
Resolve structural variation across the complete size spectrum with basepair resolution

Following are the SV tools, which can assist you to achieve your goal.

Sniffles: Structural variation caller using third generation sequencing

Sniffles is a structural variation caller using third generation sequencing (PacBio or Oxford Nanopore). It detects all types of SVs using evidence from split-read alignments, high-mismatch regions, and coverage analysis. Please note the current version of Sniffles requires sorted output from BWA-MEM (use -M and -x parameter) or NGM-LR with the optional SAM attributes enabled!

More at https://github.com/fritzsedlazeck/Sniffles

MultiBreak-SV: It identifies structural variants from next-generation paired end data, third-generation long read data, or data from a combination of sequencing platforms.

There are two pieces of software in this release: (1) a pre-processor that takes machineformat (.m5) BLASR files, and (2) MultiBreak-SV. For installation and usage instructions, see doc/MultiBreakSV-Manual.txt.

More at https://github.com/raphael-group/multibreak-sv

Parliament: A Structural Variation Tool. Why ask a single sv-detection approach to find every variant when you can have a parliament of tools deciding?

Publication about the algorithm and “…the first long-read characterization of structural variation in a diploid human personal genome…” (HS1011) - “Assessing structural variation in a personal genome—towards a human reference diploid genome”

More at https://sourceforge.net/projects/parliamentsv/

https://www.dnanexus.com/papers/Parliament_Info_Sheet.pdf

PBHoney: the structural variation discovery tool

PBHoney is an implementation of two variant-identification approaches designed to exploit the high mappability of long reads (i.e., greater than 10,000 bp). PBHoney considers both intra-read discordance and soft-clipped tails of long reads to identify structural variants.

Read The Paper http://www.biomedcentral.com/1471-2105/15/180/abstract

More at https://sourceforge.net/projects/pb-jelly/

SMRT-SV: Structural variant and indel caller for PacBio reads

Structural variant (SV) and indel caller for PacBio reads based on methods from Chaisson et al. 2014.

SMRT-SV provides an official software package for tools described in Chaisson et al. 2014 and adds several key features including the following.

Unified variant calling user interface with built-in cluster compute support
Small indel calling (2-49 bp)
Improved inversion calling (screenInversions)
Quality metric for SV calls based on number of local assemblies supporting each call
Higher sensitivity for SV calls using tiled local assemblies across the entire genome instead of "signature" regions
Genotyping of SVs with Illumina paired-end reads from WGS samples

More at https://github.com/EichlerLab/pacbio_variant_caller

Andi

Jit — Fri, 13 May 2016 05:16:35 -0500

This is the andi program for estimating the evolutionary distance between closely related genomes. These distances can be used to rapidly infer phylogenies for big sets of genomes. Because andi does not compute full alignments, it is so efficient that it scales even up to thousands of bacterial genomes.

This readme covers all necessary instructions for the impatient to get andi up and running. For extensive instructions please consult the manual.

More at https://github.com/evolbioinf/andi/

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2015/01/13/bioinformatics.btu815.full

Sequence Ontology Bioinformatics Analysis (SOBA) tool to provide a simple statistical and graphical summary of an annotated genome

BioStar — Wed, 22 Jul 2020 10:11:13 -0500

We have developed the Sequence Ontology Bioinformatics Analysis (SOBA) tool to provide a simple statistical and graphical summary of an annotated genome. We envisage its use during annotation jamborees, genome comparison and for use by developers for rapid feedback during annotation software development and testing. SOBA also provides annotation consistency feedback to ensure correct use of terminology within annotations, and guides users to add new terms to the Sequence Ontology when required. SOBA is available at http://www.sequenceontology.org/cgi-bin/soba.cgi.

More at https://pubmed.ncbi.nlm.nih.gov/20494974/

Address of the bookmark: http://www.sequenceontology.org/cgi-bin/soba.cgi

PANDASEQ is a program to align Illumina reads, optionally with PCR primers embedded in the sequence, and reconstruct an overlapping sequence.

BioStar — Fri, 21 Sep 2018 10:19:52 -0500

Development packages for zlib and libbz2 are needed, as well as a standard compiler environment. On Ubuntu, this can be installed via:

sudo apt-get install build-essential libtool automake zlib1g-dev libbz2-dev pkg-config

On MacOS, the Apple Developer tools and Fink (or MacPorts or Brew) must be installed, then:

sudo fink install bzip2-dev pkgconfig

Address of the bookmark: https://github.com/neufeld/pandaseq