More at http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Address of the bookmark: http://www.ploscompbiol.org/article/info%3Adoi%2F10.1371%2Fjournal.pcbi.1000369

Dot supports the output of MUMmer’s nucmer aligner the most commonly used software method for aligning genome assemblies. A quick script called DotPrep.py converts the delta file to a more streamlined coordinates file with an index that enables Dot to read in more alignments in certain regions on demand.

Dot, an interactive viewer for genome-genome comparison

https://dnanexus.github.io/dot/

Address of the bookmark: https://github.com/dnanexus/dot

ICRISAT seeks applications from Indian nationals Visiting Scientist-Computational Genomics (2 positions), to be part of a team of Centre of Excellence in Genomics (CEG), (www.icrisat.org/ceg) to work on legume genomics projects. The positions will be based at ICRISAT’s Headquarters in Patancheru, Hyderabad, India.

ICRISAT is a non-profit, non-political organization that conducts agricultural research for development in Asia and sub-Saharan Africa with a wide array of partners throughout the world. Covering 6.5 million square kilometers of land in 55 countries, the semi-arid tropics is home to over 2 billion people, with 650 million of these are the poorest of the poor. ICRISAT and its partners help empower those living in the semi-arid tropics, especially smallholder farmers, to overcome poverty, hunger, malnutrition and a degraded environment through more efficient and profitable agriculture. ICRISAT is headquartered in Greater Hyderabad, Andhra Pradesh, India and belongs to the Consortium of Centers supported by the Consultative Group on International Agricultural Research (CGIAR).

The Job: Responsibilities for these positions include:

Analyzing and handling large-scale next generation sequencing DNA and RNA data
Data mining and development of pipelines and troubleshooting
Genome diversity analysis such as SNPs, Indels, Structural Variations, population structure
Genome wide association study (GWAS) related analysis- LD analysis, hapmap and trait mapping
Expression analysis based on RNA-Seq data, annotation, gene ontology and metabolic pathway analysis
Epigenome analysis, small RNA identification
Gene family analysis, sequence level protein analysis, orthology/paralogy and molecular modelling
Compiling and analysis of results, writing reports and research papers

The Person: Ph.D. or MSc/MTech/PGDCA with two years research experience in Biotechnology, Computational biology, Agricultural/ Plant Biotechnology, Genetics, Molecular Biology or related discipline. Good knowledge of programming/scripting in at least two of following languages: Perl, C, C++, R, Shell Scripting and Python is plus.

How to apply: Please apply latest by 20 July 2014. The application should include the name of the position applied for, a letter of motivation, a full Curriculum Vita (CV), and the names and contact information of three references that are knowledgeable of the candidate’s professional qualifications and work experience. Technical details and more information about these positions can be obtained from R.K.VARSHNEY@CGIAR.ORG. All applications will be acknowledged, however only short listed candidates will be contacted.

Apply here https://recruit.zoho.com/ats/Portal.na?digest=T642sgLYWZOStExJ77cPrcM*sIMGZETWw4yPxngbmHA-

To get started using Bokeh to make your visualizations, see the User Guide.

To see examples of how you might use Bokeh with your own data, check out the Gallery.

A complete API reference of Bokeh is at Reference Guide.

If you are interested in contributing to Bokeh, or extending the library, see the Developer Guide.

Address of the bookmark: https://bokeh.pydata.org/en/latest/

Address of the bookmark: http://www.programmingr.com/category/stype/r-job-listings/

Address of the bookmark: http://fantom.gsc.riken.jp/zenbu/

Perl one-liners are small and awesome Perl programs that fit in a single line of code and they do one thing really well. These things include changing line spacing, numbering lines, doing calculations, converting and substituting text, deleting and printing certain lines, parsing logs, editing files in-place, doing statistics, carrying out system administration tasks, updating a bunch of files at once, and many more. Perl one-liners will make you the shell warrior. Anything that took you minutes to solve, will now take you seconds!

perl -pe '$\="\n"'   
#double space a file

perl -pe '$_ .= "\n" unless /^$/'
#double space a file except blank lines

perl -pe '$_.="\n"x7'
#7 space in a line.

perl -ne 'print unless /^$/'
#remove all blank lines

perl -lne 'print if length($_) < 20'
#print all lines with length less than 20.

perl -00 -pe ''
#If there are multiple spaces, delete all leaving one(make the file a single spaced file).

perl -00 -pe '$_.="\n"x4'
#Expand single blank lines into 4 consecutive blank lines

perl -pe '$_ = "$. $_"'
#Number all lines in a file

perl -pe '$_ = ++$a." $_" if /./'
#Number only non-empty lines in a file

perl -ne 'print ++$a." $_" if /./'
#Number and print only non-empty lines in a file

perl -pe '$_ = ++$a." $_" if /regex/'
#Number only lines that match a pattern

perl -ne 'print ++$a." $_" if /regex/'
#Number and print only lines that match a pattern

perl -ne 'printf "%-5d %s", $., $_ if /regex/'
#Left align lines with 5 white spaces if matches a pattern (perl -ne 'printf "%-5d %s", $., $_' : for all the lines)

perl -le 'print scalar(grep{/./}<>)'
#prints the total number of non-empty lines in a file

perl -lne '$a++ if /regex/; END {print $a+0}'
#print the total number of lines that matches the pattern

perl -alne 'print scalar @F'
#print the total number fields(words) in each line.

perl -alne '$t += @F; END { print $t}'
#Find total number of words in the file

perl -alne 'map { /regex/ && $t++ } @F; END { print $t }'
#find total number of fields that match the pattern

perl -lne '/regex/ && $t++; END { print $t }'
#Find total number of lines that match a pattern

perl -le '$n = 20; $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $m'
#will calculate the GCD of two numbers.

perl -le '$a = $n = 20; $b = $m = 35; ($m,$n) = ($n,$m%$n) while $n; print $a*$b/$m'
#will calculate lcd of 20 and 35.

perl -le '$n=10; $min=5; $max=15; $, = " "; print map { int(rand($max-$min))+$min } 1..$n'
#Generates 10 random numbers between 5 and 15.

perl -le 'print map { ("a".."z",”0”..”9”)[rand 36] } 1..8'
#Generates a 8 character password from a to z and number 0 – 9.

perl -le 'print map { ("a",”t”,”g”,”c”)[rand 4] } 1..20'
#Generates a 20 nucleotide long random residue.

perl -le 'print "a"x50'
#generate a string of ‘x’ 50 character long

perl -le 'print join ", ", map { ord } split //, "hello world"'
#Will print the ascii value of the string hello world.

perl -le '@ascii = (99, 111, 100, 105, 110, 103); print pack("C*", @ascii)'
#converts ascii values into character strings.

perl -le '@odd = grep {$_ % 2 == 1} 1..100; print "@odd"'
#Generates an array of odd numbers.

perl -le '@even = grep {$_ % 2 == 0} 1..100; print "@even"'
#Generate an array of even numbers

perl -lpe 'y/A-Za-z/N-ZA-Mn-za-m/' file
#Convert the entire file into 13 characters offset(ROT13)

perl -nle 'print uc'
#Convert all text to uppercase:

perl -nle 'print lc'
#Convert text to lowercase:

perl -nle 'print ucfirst lc'
#Convert only first letter of first word to uppercas

perl -ple 'y/A-Za-z/a-zA-Z/'
#Convert upper case to lower case and vice versa

perl -ple 's/(\w+)/\u$1/g'
#Camel Casing

perl -pe 's|\n|\r\n|'
#Convert unix new lines into DOS new lines:

perl -pe 's|\r\n|\n|'
#Convert DOS newlines into unix new line

perl -pe 's|\n|\r|'
#Convert unix newlines into MAC newlines:

perl -pe '/regexp/ && s/foo/bar/'
#Substitute a foo with a bar in a line with a regexp.

Reference/Sources:

http://genomics-array.blogspot.in/2010/11/some-unixperl-oneliners-for.html

http://genomespot.blogspot.com/2013/08/a-selection-of-useful-bash-one-liners.html

http://biowize.wordpress.com/2012/06/15/command-line-magic-for-your-gene-annotations/

http://genomics-array.blogspot.com/2010/11/some-unixperl-oneliners-for.html

http://bioexpressblog.wordpress.com/2013/04/05/split-multi-fasta-sequence-file/

Features

• Interactive panning/zooming
• Compose maps using arbitrary combinations of:
  • Map tiles
  • Markers
  • Polygons
  • Lines
  • Popups
  • GeoJSON
• Create maps right from the R console or RStudio
• Embed maps in knitr/R Markdown documents and Shiny apps
• Easily render spatial objects from the sp or sf packages, or data frames with latitude/longitude columns
• Use map bounds and mouse events to drive Shiny logic
• Display maps in non spherical mercator projections
• Augment map features using chosen plugins from leaflet plugins repository

https://rstudio.github.io/leaflet/

Address of the bookmark: https://rstudio.github.io/leaflet/

https://academic.oup.com/bioinformaticsadvances/advance-article/doi/10.1093/bioadv/vbaf208/8257678?login=true

Address of the bookmark: https://github.com/sib-swiss/termal