awk '/pattern1/ {Actions}
/pattern2/ {Actions}' file

The working of Awk is as follows
Awk reads the input files one line at a time.
For each line, it matches with given pattern in the given order, if matches performs the corresponding action.
If no pattern matches, no action will be performed.
In the above syntax, either search pattern or action are optional, But not both.
If the search pattern is not given, then Awk performs the given actions for each line of the input.
If the action is not given, print all that lines that matches with the given patterns which is the default action.
Empty braces with out any action does nothing. It wont perform default printing operation.
Each statement in Actions should be delimited by semicolon.
Say you have data.tsv with the following contents:

$ cat data/test.tsv
contig1 ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
contig2 ACTTTATATATT
contig3 ACTTATATATATATA
contig4 ACTTATATATATATA
contig5 ACTTTATATATT
By default Awk prints every line from the file.

$ awk '{print;}' data/test.tsv
contig1 ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
contig2 ACTTTATATATT
contig3 ACTTATATATATATA
contig4 ACTTATATATATATA
contig5 ACTTTATATATT
We print the line which matches the pattern contig3

$ awk '/contig3/' data/test.tsv
contig3 ACTTATATATATATA
Awk has number of builtin variables. For each record i.e line, it splits the record delimited by whitespace character by default and stores it in the $n variables. If the line has 5 words, it will be stored in $1, $2, $3, $4 and $5. $0 represents the whole line. NF is a builtin variable which represents the total number of fields in a record.

$ awk '{print $1","$2;}' data/test.tsv
contig1,ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
contig2,ACTTTATATATT
contig3,ACTTATATATATATA
contig4,ACTTATATATATATA
contig5,ACTTTATATATT

$ awk '{print $1","$NF;}' data/test.tsv
contig1,ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
contig2,ACTTTATATATT
contig3,ACTTATATATATATA
contig4,ACTTATATATATATA
contig5,ACTTTATATATT

Awk has two important patterns which are specified by the keyword called BEGIN and END. The syntax is as follows:

BEGIN { Actions before reading the file}
{Actions for everyline in the file}
END { Actions after reading the file }

For example,
$ awk 'BEGIN{print "Header,Sequence"}{print $1","$2;}END{print "-------"}' data/test.tsv
Header,Sequence
contig1,ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
contig2,ACTTTATATATT
contig3,ACTTATATATATATA
contig4,ACTTATATATATATA
contig5,ACTTTATATATT
-------
We can also use the concept of a conditional operator in print statement of the form print CONDITION ? PRINT_IF_TRUE_TEXT : PRINT_IF_FALSE_TEXT. For example, in the code below, we identify sequences with lengths > 14:

$ awk '{print (length($2)>14) ? $0">14" : $0"<=14";}' data/test.tsv
contig1 ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG>14
contig2 ACTTTATATATT<=14
contig3 ACTTATATATATATA>14
contig4 ACTTATATATATATA>14
contig5 ACTTTATATATT<=14
We can also use 1 after the last block {} to print everything (1 is a shorthand notation for {print $0} which becomes {print} as without any argument print will print $0 by default), and within this block, we can change $0, for example to assign the first field to $0 for third line (NR==3), we can use:

$ awk 'NR==3{$0=$1}1' data/test.tsv
contig1 ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
contig2 ACTTTATATATT
contig3
contig4 ACTTATATATATATA
contig5 ACTTTATATATT
You can have as many blocks as you want and they will be executed on each line in the order they appear, for example, if we want to print $1 three times (here we are using printf instead of print as the former doesn't put end-of-line character),

$ awk '{printf $1"\t"}{printf $1"\t"}{print $1}' data/test.tsv
contig1 contig1 contig1
contig2 contig2 contig2
contig3 contig3 contig3
contig4 contig4 contig4
contig5 contig5 contig5
Although, we can also skip executing later blocks for a given line by using next keyword:

$ awk '{printf $1"\t"}NR==3{print "";next}{print $1}' data/test.tsv
contig1 contig1
contig2 contig2
contig3
contig4 contig4
contig5 contig5

$ awk 'NR==3{print "";next}{printf $1"\t"}{print $1}' data/test.tsv
contig1 contig1
contig2 contig2

contig4 contig4
contig5 contig5
You can also use getline to load the contents of another file in addition to the one you are reading, for example, in the statement given below, the while loop will load each line from test.tsv into k until no more lines are to be read:

$ awk 'BEGIN{while((getline k <"data/test.tsv")>0) print "BEGIN:"k}{print}' data/test.tsv
BEGIN:contig1 ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
BEGIN:contig2 ACTTTATATATT
BEGIN:contig3 ACTTATATATATATA
BEGIN:contig4 ACTTATATATATATA
BEGIN:contig5 ACTTTATATATT
contig1 ACTGTCTGTCACTGTGTTGTGATGTTGTGTGTG
contig2 ACTTTATATATT
contig3 ACTTATATATATATA
contig4 ACTTATATATATATA
contig5 ACTTTATATATT
You can also store data in the memory with the syntax VARIABLE_NAME[KEY]=VALUE which you can later use through for (INDEX in VARIABLE_NAME) command:

$ awk '{i[$1]=1}END{for (j in i) print j"<="i[j]}' data/test.tsv
contig1<=1
contig2<=1
contig3<=1
contig4<=1
contig5<=1

https://bioinformaticsworkbook.org/

Address of the bookmark: https://bioinformaticsworkbook.org/

https://www.pango.network/the-pango-nomenclature-system/statement-of-nomenclature-rules/

https://www.pango.network/how-does-the-system-work/what-are-pango-lineages/

Reference paper

https://www.nature.com/articles/s41564-020-0770-5

Address of the bookmark: https://www.pango.network/the-pango-nomenclature-system/statement-of-nomenclature-rules/

• In a GitHub or GitLab repository
• Free to use
• Written in markdown or similar

NOTE: This list of courses is selected only based on the above criteria.
There are no checks on quality.

https://glittr.org/?per_page=25&sort_by=stargazers&sort_direction=desc

Address of the bookmark: https://glittr.org/?per_page=25&sort_by=stargazers&sort_direction=desc

- Plan more efficient experiments
- Correctly interpret results
- Communicate results in publications more effectively

The course focus is on methodologies, not on particular software tools. After the course participants should be able to apply the methods in their respective environment. However, during the course, hands-on sessions will be performed using the Genedata Expressionist® software, which enables participants to quickly apply the discussed methods and visualize results. No previous knowledge on Expressionist® is required; access to the software is free of charge during the course.

More @ http://www.dixa-fp7.eu/dixa-training/dixa-training-agenda/genedata-academy#!

CDSA is pleased to announce a 4 days hands-on training program on “Essentials of Statistics and Data Analysis using R” at ICGEB, Aruna Asaf Ali Road, New Delhi on December 1 – 4, 2015. This will involve developing and enhancing skills to understand basic principles of statistics for summarizing data and use of appropriate statistical tests as well as providing an understanding of data analysis using R. Didactic lectures with practical sessions will be delivered by experienced faculties from AIIMS and Novartis. Live classroom with power point presentations, case studies, mock exercise, practical sessions on R, group work with time for discussion and Q&A sessions are added advantages of this workshop.

Please contact gayatrivishwakarma.cdsa@thsti.res.in or vineetabaloni.cdsa@thsti.res.in for program and registration details.

Please nominate personage or register yourself on or before November 6, 2015 along with the electronic transfer of registration fee.

This workshop is aimed at bringing together ~40 diverse speciation researchers:

- to collaborate on populating a database of published reproductive barriers based on a standardized RIO framework (https://ecoevorxiv.org/repository/view/10083/). This will involve working through papers during the workshop to extract RI measures and other metadata and entering them into a draft database (some preparatory work before the workshop may be requested to facilitate these steps during the workshop)

- to start working towards a manuscript using this database to answer an outstanding question in speciation

- to network, learn about reproductive isolation, and have fun!

If you are interested in applying to participate in the workshop, please fill out the form in the link below by ** May 20th **. Room & board will be covered by the organizers; all other travel costs are the responsibility of the attendee.

Application link:

https://docs.google.com/forms/d/e/1FAIpQLSenAMqSdZjeRmKEDtBNa5tpjPn7IukPyT5BzfZ4JMpIk2YOEw/viewform

The previous IOS workshop was held in Finland in 2023 (see more details at https://speciation-network.pages.ist.ac.at/workshops) and resulted in new interactions between speciation researchers and the successful publication of an Integration of Speciation research manuscript (https://academic.oup.com/evolinnean/article/3/1/kzae001/7609448).

We look forward to seeing you in Glasgow!

Address of the bookmark: http://omega.omicsbio.org/

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm

Address of the bookmark: https://github.com/marbl/MashMap