Prerequisites

This is an intermediate lesson and assumes learners have already done some bioinformatics:

• Familiarity with the BASH command shell, including concepts like pipes, variables and loops.
• Knowledge of bioinformatics fundamentals like the FASTQ file format and transcriptome sequencing, in order to understand the example workflow.

No previous knowledge of Snakemake or workflow systems is required.

https://carpentries-incubator.github.io/snakemake-novice-bioinformatics/index.html

Address of the bookmark: https://carpentries-incubator.github.io/snakemake-novice-bioinformatics/aio/index.html

Address of the bookmark: http://www.vital-it.ch/

SLURM is similar in many ways to most other queue systems. You write a batch script then submit it to the queue manager. The queue manager then schedules your job to run on the queue (or partition in SLURM parlance) that you designate. Below we will provide an outline of how to submit jobs to SLURM, how SLURM decides when to schedule your job and how to monitor progress.

SLURM has a number of valuable features compared to other job management systems:

• Kill and Requeue SLURM’s ability to kill and requeue is superior to that of other systems. It waits for jobs to be cleared before scheduling the high priority job. It also does kill and requeue on memory rather than just on core count.
• Memory Memory requests are sacrosanct in SLURM. Thus the amount of memory you request at run time is guaranteed to be there. No one can infringe on that memory space and you cannot exceed the amount of memory that you request.
• Accounting Tools SLURM has a back end database which stores historical information about the cluster. This information can be queried by the users who are curious about how much resources they have used.

Summary of SLURM commands

The table below shows a summary of SLURM commands. These commands are described in more detail below along with links to the SLURM doc site.

Address of the bookmark: https://bioinfo.noble.org/GWASPRO/

1. MISA: MISA (MIcroSAtellite) is a web-based tool that can identify SSRs in DNA sequences. It can be used to analyze nucleotide sequences from various organisms and can identify perfect, compound, and imperfect SSRs.

2. SSR Locator: SSR Locator is a web-based tool that identifies SSRs in both DNA and RNA sequences. It can identify perfect, compound, and imperfect SSRs, and can also filter out low complexity regions.

3. SciRoKo: SciRoKo is a software tool that can identify SSRs in DNA sequences. It can be used to analyze genomic and transcriptomic sequences from various organisms and can identify perfect, compound, and imperfect SSRs.

4. Primer3: Primer3 is a web-based tool that designs PCR primers for SSRs. It can design primers for perfect and imperfect SSRs, and can be used to design primers for SSRs in various organisms.

5. QDD: QDD (Quick Detection of Duplication) is a software tool that can identify SSRs in DNA sequences and can also identify duplicate loci. It can be used to analyze genomic and transcriptomic sequences from various organisms.

These are just a few examples of the many bioinformatics tools available for exploring SSRs. Depending on your specific needs and research questions, you may find that other tools are more appropriate for your analysis.

Address of the bookmark: http://kobas.cbi.pku.edu.cn/

More at http://bmbl.sdstate.edu/DMINDA2/

https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4086085/

Address of the bookmark: http://bmbl.sdstate.edu/DMINDA2/

Address of the bookmark: http://huanglab.phys.hust.edu.cn/hnadock/

The following table shows SLURM commands on the SOE cluster.

For more information, run man on the commands above. See some examples below.

1. Info about the partitions and nodes
List all the partitions available to you and the nodes therein:

sinfo

Nodes in state idle can accept new jobs.

Show a partition configuratuin, for example, SOE_main

scontrol show partition=SOE_main

Show current info about a specific node:

scontrol show node=<nodename>

You can also specify a group of nodes in the command above. For example, if your MPI job is running across soenode05,06,35,36, you can execute the command below to get the info on the nodes you are interested in:

scontrol show node=soenode[05-06,35-36]

An informative parameter in the output to look at would be CPULoad. It allows you to see how your application utilizes the CPUs on the running nodes.

2. Submit scripts
The header in a submit script specifies job name, partition (queue), time limit, memory allocation, number of nodes, number of cores, and files to collect standard output and error at run time, for example

#!/bin/bash

#SBATCH --job-name=OMP_run     # job name, "OMP_run"
#SBATCH --partition=SOE_main   # partition (queue)
#SBATCH -t 0-2:00              # time limit: (D-HH:MM) 
#SBATCH --mem=32000            # memory per node in MB 
#SBATCH --nodes=1              # number of nodes
#SBATCH --ntasks-per-node=16   # number of cores
#SBATCH --output=slurm.out     # file to collect standard output
#SBATCH --error=slurm.err      # file to collect standard errors

If the time limit is not specified in the submit script, SLURM will assign the default run time, 3 days. This means the job will be terminated by SLURM in 72 hrs. The maximum allowed run time is two weeks, 14-0:00.
If the memory limit is not requested, SLURM will assign the default 16 GB. The maximum allowed memory per node is 128 GB. To see how much RAM per node your job is using, you can run commands sacct or sstat to query MaxRSS for the job on the node - see examples below.
Depending on a type of application you need to run, the submit script may contain commands to create a temporary space on a computational node - see the discussion about using the file systems on the cluster.
Then it sets the environment specific to the application and starts the application on one or multiple nodes - see sbatch sample scripts in directory /usr/local/Samples on soemaster1.hpc.rutgers.edu.
You can submit your job to the cluster with sbatch command:

sbatch myscript.sh

3. Query job information
List all currently submitted jobs in running and pending states for a user:

squeue -u <username>

Command squeue can be run with format options to expose specific information, for example, when pending job #706 is scheduled to start running:

squeue -j 706 --format="%S"

START_TIME
2015-04-30T09:54:32

More info can be shown by placing additional format options, for example:

squeue -j 706 --format="%i %P %j %u %T %l %C %S"

JOBID PARTITION   NAME    USER STATE   TIMELIMIT  CPUS START_TIME
706   SOE_main  Par_job_3 mike PENDING 3-00:00:00 64   2015-04-30T09:54:32

To see when all the jobs, pending in the queue, are scheduled to start:

squeue --start 

List all running and completed jobs for a user

sqlog -u <username>

or

sqlog -j <JobID>

The following appreviations are used for the job states:

       CA   CANCELLED      Job was cancelled.

       CD   COMPLETED      Job completed normally.

       CG   COMPLETING     Job is in the process of completing.

       F    FAILED         Job termined abnormally.

       NF   NODE_FAIL      Job terminated due to node failure.

       PD   PENDING        Job is pending allocation.

       R    RUNNING        Job currently has an allocation.

       S    SUSPENDED      Job is suspended.

       TO   TIMEOUT        Job terminated upon reaching its time limit.

You can specify the fields you would like to see in the output of sqlog:

sqlog --format=list

The command below, for example, provides Job ID, user name, exit state, start date-time, and end date-time for job #2831:

sqlog -j 2831 --format=jid,user,state,start,end

List status info for a currently running job:

sstat -j <jobid>

A formatted output can be used to gain only a specific info, for example, the maximum resident RAM usage on a node:

sstat --format="JobID,MaxRSS" -j <jobid>

To get statistics on completed jobs by jobID:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -j <jobid>

To view the same information for all jobs of a user:

sacct --format="JobID,JobName,MaxRSS,Elapsed" -u <username>

To print a list of fields that can be specified with the --format option:

sacct --helpformat

For example, to get Job ID, Job name, Exit state, start date-time, and end date-time for job #2831:

sacct -j 2831 --format="JobID,JobName,State,Start,End"

Another useful command to gain information about a running job is scontrol:

scontrol show job=<jobid>

4. Cancel a job
To cancel one job:

scancel <jobid>

To cancel one job and delete the TMP directory created by the submit script on a node:

sdel <jobid>

To cancel all the jobs for a user:

scancel -u <username>

To cancel one or more jobs by name:

scancel --name <myJobName>