BOL: Related items

Genome assembly stats plotting

Jit — Wed, 28 Feb 2018 03:45:39 -0600

A de novo genome assembly can be summarised b

y a number of metrics, including:

Overall assembly length
Number of scaffolds/contigs
Length of longest scaffold/contig
Scaffold/contig N50 and N90Assembly base composition, in particular percentage GC and percentage Ns
CEGMA completeness
Scaffold/contig length/count distribution

assembly-stats supports two widely used presentations of these values, tabular and cumulative length plots, and introduces an additional circular plot that summarises most commonly used assembly metrics in a single visualisation. Each of these presentations is generated using javascript from a common (JSON) data structure, allowing toggling between alternative views, and each can be applied to a single or multiple assemblies to allow direct comparison of alternate assemblies.

Tabular presentation allows direct comparison of exact values between assemblies, the limitations of this approach lie in the necessary omission of distributions and the challenge of interpreting ratios of values that may vary by several orders of magnitude.

Address of the bookmark: https://github.com/rjchallis/assembly-stats

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

HaploMerger2: rebuilding both haploid sub-assemblies from high-heterozygosity diploid genome assembly

BioStar — Thu, 27 Sep 2018 07:08:47 -0500

HM2 can process any diploid assemblies, but it is especially suitable for diploid assemblies with high heterozygosity (≥3%), which can be difficult for other tools. This pipeline also implements flexible and sensitive assembly error detection, a hierarchical scaffolding procedure and a reliable gap-closing method for haploid sub-assemblies.

Source code, executables and the testing dataset are freely available at https://github.com/mapleforest/HaploMerger2/releases/.

Address of the bookmark: https://github.com/mapleforest/HaploMerger2/releases/

Referee: Genome assembly quality scores

Jit — Sun, 04 Nov 2018 16:44:30 -0600

Modern genome sequencing technologies provide a succint measure of quality at each position in every read, however all of this information is lost in the assembly process. Referee summarizes the quality information from the reads that map to a site in an assembled genome to calculate a quality score for each position in the genome assembly.

We accomplish this by first calculating genotype likelihoods for every site. For a given site in a diploid genome, there are 10 possible genotypes (AA, AC, AG, AT, CC, CG, CT, GG, GT, TT). Referee takes as input the genotype likelihoods calculated for all 10 genotypes given the called reference base at each position.

Referee is a program to calculate a quality score for every position in a genome assembly. This allows for easy filtering of low quality sites for any downstream analysis.

https://github.com/gwct/referee

Address of the bookmark: https://gwct.github.io/referee/#

Evaluation of genome assembly software based on long reads

BioStar — Fri, 01 Feb 2019 11:55:54 -0600

TGS technologies have been used to produce highly accurate de novo assemblies of hundreds of microbial genomes and highly contiguous reconstructions of many dozens of plant and animal genomes, enabling new insights into evolution and sequence diversity. They have also been applied to resequencing analyses, to create detailed maps of structural variations in many species. Also, these new technologies have been used to fill in many of the gaps in the human reference genome.

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

GMASS: a novel measure for genomeassembly structural similarity

Abhimanyu Singh — Sun, 14 Apr 2019 20:35:40 -0500

The GMASS score is a novel measure for representing structural similarity between two assemblies. It will contribute to the understanding of assembly output and developing de novo assemblers.

https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2710-z

Address of the bookmark: http://bioinfo.konkuk.ac.kr/GMASS/htdocs/syncircos.php

RefKA: A fast and efficient long-read genome assembly approach for large and complex genomes

Rahul Nayak — Fri, 01 May 2020 03:00:40 -0500

RefKA, a reference-based approach for long read genome assembly. This approach relies on breaking up a closely related reference genome into bins, aligning k-mers unique to each bin with PacBio reads, and then assembling each bin in parallel followed by a final bin-stitching step.

Address of the bookmark: https://github.com/AppliedBioinformatics/RefKA

Bioinformatics tools for genome assembly !

BioStar — Mon, 24 Jul 2023 07:04:26 -0500

There are numerous genome assembly tools available, each with its strengths and weaknesses. Here is a list of some widely used genome assembly tools as of my last update in September 2021:

SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.
ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.
Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.
SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.
MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.
Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.
Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.
SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.
SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.
Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.
Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.
wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.
Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.
Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.
CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.
Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

quarTeT: a telomere-to-telomere toolkit for gap-free genome assembly and centromeric repeat identification.

Abhi — Sat, 08 Jun 2024 15:54:36 -0500

quarTeT is a collection of tools for T2T genome assembly and basic analysis in automatic workflow.

Task include:

AssemblyMapper : reference-guided genome assembly
GapFiller : long-reads based gap filling
TeloExplorer : telomere identification
CentroMiner : centromere candidate prediction

https://academic.oup.com/hr/article/10/8/uhad127/7197191?login=false

Address of the bookmark: http://www.atcgn.com:8080/quarTeT/home.html

SPAdes

Abhimanyu Singh — Tue, 19 Apr 2016 08:37:08 -0500

SPAdes – St. Petersburg genome assembler – is intended for both standard isolates and single-cell MDA bacteria assemblies. This manual will help you to install and run SPAdes. SPAdes version 3.7.1 was released under GPLv2 on March 8, 2016 and can be downloaded from http://bioinf.spbau.ru/en/spades.

Manual at http://spades.bioinf.spbau.ru/release3.7.1/manual.html

Address of the bookmark: http://bioinf.spbau.ru/spades