BOL: Related items

List of non-commercial NGS genotype-calling software

Jit — Thu, 09 Aug 2018 04:21:32 -0500

Meaningful analysis of next-generation sequencing (NGS) data, which are produced extensively by genetics and genomics studies, relies crucially on the accurate calling of SNPs and genotypes. Recently developed statistical methods both improve and quantify the considerable uncertainty associated with genotype calling, and will especially benefit the growing number of studies using low- to medium-coverage data.

A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

OrthoANI: An improved algorithm and software for calculating average nucleotide identity

Abhimanyu Singh — Wed, 12 Dec 2018 08:36:08 -0600

OAT uses OrthoANI to measure the overall similarity between two genome sequences. ANI and OrthoANI are comparable algorithms: they share the same species demarcation cut-off at 95~96% and large comparison studies have demonstrated both algorithms to produce near identical reciprocal similarities. Details of the OrthoANI algorithm is given in (Lee et al. 2015). OAT employs an easy-to-follow Graphical User Interface that allow researchers to calculate OrthoANI values between genomes of interest without unfamiliar Command Line Environments. Moreover, the OAT_cmd command-line software can be integrated into preexisting bioinformatics pipelines.

Address of the bookmark: https://www.ezbiocloud.net/tools/orthoani

IQ-TREE: Efficient software for phylogenomic inference

Jit — Mon, 18 Feb 2019 04:25:11 -0600

A fast and effective stochastic algorithm to infer phylogenetic trees by maximum likelihood. IQ-TREE compares favorably to RAxML and PhyML in terms of likelihoods with similar computing time

IQ-TREE found higher likelihoods between 62.2% and 87.1% of the studied alignments, thus efficiently exploring the tree-space. If we use the IQ-TREE stopping rule, RAxML and PhyML are faster in 75.7% and 47.1% of the DNA alignments and 42.2% and 100% of the protein alignments, respectively. However, the range of obtaining higher likelihoods with IQ-TREE improves to 73.3–97.1%. IQ-TREE is freely available at http://www.cibiv.at/software/iqtree

Address of the bookmark: http://www.iqtree.org/

VICUNA: a software tool that enables consensus assembly of ultra-deep sequence derived from diverse viral or other heterogeneous populations.

biogeek — Tue, 25 Aug 2020 03:40:17 -0500

VICUNA is a de novo assembly program targeting populations with high mutation rates. It creates a single linear representation of the mixed population on which intra-host variants can be mapped. For clinical samples rich in contamination (e.g., >95%), VICUNA can leverage existing genomes, if available, to assemble only target-alike reads. After initial assembly, it can also use existing genomes to perform guided merging of contigs. For each data set (e.g., Illumina paired read, 454), VICUNA outputs consensus sequence(s) and the corresponding multiple sequence alignment of constituent reads. VICUNA efficiently handles ultra-deep sequence data with tens of thousands fold coverage.

http://software.broadinstitute.org/viral/docs/vicuna_v1.0.pdf

Address of the bookmark: https://www.broadinstitute.org/viral-genomics/vicuna

RagTag: a collection of software tools for scaffolding and improving modern genome assemblies

Jit — Sat, 11 Sep 2021 00:28:14 -0500

RagTag is a collection of software tools for scaffolding and improving modern genome assemblies. Tasks include:

Homology-based misassembly correction
Homology-based assembly scaffolding and patching
Scaffold merging

Address of the bookmark: https://github.com/malonge/RagTag

dna2bit: an ultra-fast and accurate genomic distance estimation software

Neel — Wed, 13 Aug 2025 19:56:21 -0500

dna2bit: an ultra-fast and accurate genomic distance estimation software

dna2bit is a software tool developed in C++11, leveraging the capabilities of OpenMP for parallel computing and the popcount technique for efficient bit manipulation.

Address of the bookmark: https://github.com/lijuzeng/dna2bit

assemblytics: delta file to analyze alignments of an assembly to another assembly or a reference genome

Jit — Thu, 14 Jun 2018 07:31:00 -0500

Download and install MUMmer Align your assembly to a reference genome using nucmer (from MUMmer package) $ nucmer -maxmatch -l 100 -c 500 REFERENCE.fa ASSEMBLY.fa -prefix OUT Consult the MUMmer manual if you encounter problems Optional: Gzip the delta file to speed up upload (usually 2-4X faster) $ gzip OUT.delta Then use the OUT.delta.gz file for upload. Upload the .delta or delta.gz file (view example) to Assemblytics Important: Use only contigs rather than scaffolds from the assembly. This will prevent false positives when the number of Ns in the scaffolded sequence does not match perfectly to the distance in the reference. The unique sequence length required represents an anchor for determining if a sequence is unique enough to safely call variants from, which is an alternative to the mapping quality filter for read alignment. http://assemblytics.com/

Address of the bookmark: http://assemblytics.com/

G-compass: a comparative genome browser

Jit — Thu, 12 Apr 2018 10:00:27 -0500

G-compass (http://www.h-invitational.jp/g-compass/) is a comparative genome browser. It visualizes evolutionarily conserved genomic regions between human and other 12 vertebrates based on original genome alignments pursuing higher coverage (1,2). Annotations of human genes/transcripts and their ortholog information were derived from H-InvDB and its subdatabase Evola, respectively. G-compass is available for free of charge. [ Sample ]

Address of the bookmark: http://www.h-invitational.jp/g-compass/

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets

Neel — Sat, 06 Jul 2019 13:56:10 -0500

Simka is a de novo comparative metagenomics tool. Simka represents each dataset as a k-mer spectrum and compute several classical ecological distances between them.

Developper: Gaëtan Benoit, PhD, former member of the Genscale team at Inria.

Contact: claire dot lemaitre at inria dot fr

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets. https://gatb.inria.fr/software/simka/

Address of the bookmark: https://github.com/GATB/simka

Bio7: an integrated development environment for ecological modeling, scientific image analysis and statistical analysis

Nidhi Rajput — Fri, 07 Feb 2020 23:32:24 -0600

The application Bio7 is an integrated development environment for ecological modeling, scientific image analysis and statistical analysis. The application itself is based on an RCP-Eclipse-Environment (Rich-Client-Platform) which offers a huge flexibility in configuration and extensibility because of its plug-in structure and the possibility of customization.

https://bio7.org/about/

Address of the bookmark: https://bio7.org/home-2/