BOL: Related items

AlignQC: A tool for assessing an alignment, and generating reports that are easy to share

Jit — Tue, 07 Aug 2018 04:41:07 -0500

Long read alignment analysis. Generate a reports on sequence alignments for mappability vs read sizes, error patterns, annotations and rarefraction curve analysis. The most basic analysis only requires a BAM file, and outputs a web browser compatible xhtml to visualize/share/store/extract analysis results.

https://f1000research.com/articles/6-100/

https://github.com/jason-weirather/AlignQC

Address of the bookmark: https://www.healthcare.uiowa.edu/labs/au/AlignQC/

LRCstats: a tool for evaluating long reads correction methods

Aaryan Lokwani — Wed, 22 Aug 2018 11:05:04 -0500

LRCstats is an open-source pipeline for benchmarking DNA long read correction algorithms for long reads outputted by third generation sequencing technology such as machines produced by Pacific Biosciences. The reads produced by third generation sequencing technology, as the name suggests, are longer in length than reads produced by next generation sequencing technologies, such as those produced by Illumina. However, long reads are plagued by high error rates, which can cause issues in downstream analysis. Long read correction algorithms reduce the error rate of long reads either through self-correcting methods or using accurate, short reads outputted by next generation sequencing technologies to correct long reads.

Address of the bookmark: https://github.com/cchauve/lrcstats

BASE: a practical de novo assembler for large genomes using long NGS reads

Rahul Nayak — Fri, 19 Oct 2018 07:25:21 -0500

new de novo assembler called BASE. It enhances the classic seed-extension approach by indexing the reads efficiently to generate adaptive seeds that have high probability to appear uniquely in the genome. Such seeds form the basis for BASE to build extension trees and then to use reverse validation to remove the branches based on read coverage and paired-end information, resulting in high-quality consensus sequences of reads sharing the seeds. Such consensus sequences are then extended to contigs.

Address of the bookmark: https://github.com/dhlbh/BASE

Deepbinner: a signal-level demultiplexer for Oxford Nanopore reads

Neel — Tue, 27 Nov 2018 03:38:49 -0600

Deepbinner is a tool for demultiplexing barcoded Oxford Nanopore sequencing reads. It does this with a deep convolutional neural network classifier, using many of the architectural advances that have proven successful in image classification. Unlike other demultiplexers (e.g. Albacore and Porechop), Deepbinner identifies barcodes from the raw signal (a.k.a. squiggle) which gives it greater sensitivity and fewer unclassified reads.

Reasons to use Deepbinner:
- To minimise the number of unclassified reads (use Deepbinner by itself).
- To minimise the number of misclassified reads (use Deepbinner in conjunction with Albacore demultiplexing).
- You plan on running signal-level downstream analyses, like Nanopolish. Deepbinner can demultiplex the fast5 fileswhich makes this easier.
Reasons to not use Deepbinner:
- You only have basecalled reads not the raw fast5 files (which Deepbinner requires).
- You have a small/slow computer. Deepbinner is more computationally intensive than Porechop.
- You used a sequencing/barcoding kit other than the ones Deepbinner was trained on.

Address of the bookmark: https://github.com/rrwick/Deepbinner

Rcorrector: efficient and accurate error correction for Illumina RNA-seq reads

BioStar — Tue, 04 Feb 2020 23:23:16 -0600

Rcorrector has an accuracy higher than or comparable to existing methods, including the only other method (SEECER) designed for RNA-seq reads, and is more time and memory efficient. With a 5 GB memory footprint for 100 million reads, it can be run on virtually any desktop or server. The software is available free of charge under the GNU General Public License from https://github.com/mourisl/Rcorrector/.

Usage: perl run_rcorrector.pl [OPTIONS]
OPTIONS:
	Required
	-s seq_files: comma separated files for single-end data sets
	-1 seq_files_left: comma separated files for the first mate in the paried-end data sets
	-2 seq_files_right: comma separated files for the second mate in the paired-end data sets
	-i seq_files_interleaved: comma sperated files for interleaved paired-end data sets
	Optional
	-k INT: kmer_length (<=32, default: 23)
	-od STRING: output_file_directory (default: ./)
	-t INT: number of threads to use (default: 1)
	-trim : allow trimming (default: false)
	-maxcorK INT: the maximum number of correction within k-bp window (default: 4)
	-wk FLOAT: the proportion of kmers that are used to estimate weak kmer count threshold, lower for more divergent genome (default: 0.95)
	-ek INT: expected number of kmers; does not affect the correctness of program but affects the memory usage (default: 100000000)
	-stdout: output the corrected reads to stdout (default: not used)
	-verbose: output some correction information to stdout (default: not used)
	-stage INT: start from which stage (default: 0)
		0-start from begining(storing kmers in bloom filter) ;
		1-start from count kmers showed up in bloom filter;
		2-start from dumping kmer counts into a jf_dump file;
		3-start from error correction.

Address of the bookmark: https://github.com/mourisl/Rcorrector/

SHAMAN: a user-friendly website for metataxonomic analysis from raw reads to statistical analysis

BioStar — Mon, 17 Aug 2020 05:21:09 -0500

SHAMAN is a shiny application for differential analysis of metagenomic data (16S, 18S, 23S, 28S, ITS and WGS) including bioinformatics treatment of raw reads for targeted metagenomics, statistical analysis and results visualization with a large variety of plots (barplot, boxplot, heatmap, …).
The bioinformatics treatment is based on Vsearch [Rognes 2016] which showed to be both accurate and fast [Wescott 2015].The statistical analysis is based on DESeq2 R package [Anders and Huber 2010] which robustly identifies the differential abundant features as suggested in [McMurdie and Holmes 2014] and [Jonsson2016]. SHAMAN robustly identifies the differential abundant genera with the Generalized Linear Model implemented in DESeq2 [Love 2014].
SHAMAN is compatible with standard formats for metagenomic analysis (.csv, .tsv, .biom) and figures can be downloaded in several formats. A presentation about SHAMAN is available here and a poster here.

More at https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-020-03666-4

Address of the bookmark: https://github.com/aghozlane/shaman

FastProNGS: fast preprocessing of next-generation sequencing reads

Rahul Nayak — Sat, 26 Dec 2020 08:35:21 -0600

FastProNGS to integrate the quality control process with automatic adapter removal. Parallel processing was implemented to speed up the process by allocating multiple threads. Compared with similar up-to-date preprocessing tools, FastProNGS is by far the fastest.

Address of the bookmark: https://github.com/Megagenomics/FastProNGS

HairSplitter: assembling long reads in an unknown number of haplotypes

BioStar — Wed, 07 Dec 2022 00:13:40 -0600

Pros and cons of HairSplitter Limitations of HairSplitter:

Not very fast: it re-polishes the whole assembly

Limited in the number of haplotypes

Strengths of HairSplitter:

Very modular, can be used with any assembler

Naive: makes no assumption on ploidy, parameter-free

Safe: won’t artificially duplicate contigs

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

HairSplitter splits collapsed assemblies from “draft” assemblies obtained by any means

HairSplitter can recover haplotypes and distinguish repeated elements

Only needs sequencing reads, potentially error-prone

Not really available yet (github.com/RolandFaure/HairSplitter)

https://hal.archives-ouvertes.fr/hal-03864075/file/RolandFaure_presentation_SeqBIM_2022.pdf

Address of the bookmark: https://hal.archives-ouvertes.fr/hal-03817928/document

Trimmomatic: A flexible read trimming tool for Illumina NGS data

Jit — Fri, 15 Apr 2016 05:58:53 -0500

Paired End:

java -jar trimmomatic-0.35.jar PE -phred33 input_forward.fq.gz input_reverse.fq.gz output_forward_paired.fq.gz output_forward_unpaired.fq.gz output_reverse_paired.fq.gz output_reverse_unpaired.fq.gz ILLUMINACLIP:TruSeq3-PE.fa:2:30:10 LEADING:3 TRAILING:3 SLIDINGWINDOW:4:15 MINLEN:36

This will perform the following:

Remove adapters (ILLUMINACLIP:TruSeq3-PE.fa:2:30:10)
Remove leading low quality or N bases (below quality 3) (LEADING:3)
Remove trailing low quality or N bases (below quality 3) (TRAILING:3)
Scan the read with a 4-base wide sliding window, cutting when the average quality per base drops below 15 (SLIDINGWINDOW:4:15)
Drop reads below the 36 bases long (MINLEN:36)

More at http://www.usadellab.org/cms/?page=trimmomatic

Address of the bookmark: http://www.usadellab.org/cms/?page=trimmomatic

Stampy

Abhi — Fri, 20 May 2016 19:13:32 -0500

Stampy is a package for the mapping of short reads from illumina sequencing machines onto a reference genome. It's recommended for most workflows, including those for genomic resequencing, RNA-Seq and Chip-seq. Stampy excels in the mapping of reads containing that contain sequence variation relative to the reference, in particular for those containing insertions or deletions.

Address of the bookmark: http://www.well.ox.ac.uk/project-stampy