BOL: Related items

Opera: An optimal genome scaffolding program

Jit — Mon, 27 Nov 2017 10:18:20 -0600

Opera (Optimal Paired-End Read Assembler) is a sequence assembly program (http://en.wikipedia.org/wiki/Sequence_assembly ). It uses information from paired-end or long reads to optimally order and orient contigs assembled from shotgun-sequencing reads.

An updated version called OPERA-LG has been re-engineered with features for the assembly of large and complex genomes.

Song Gao, Denis Bertrand, Burton K. H. Chia and Niranjan Nagarajan. OPERA-LG: efficient and exact scaffolding of large, repeat-rich eukaryotic genomes with performance guarantees. Genome Biology, May 2016, doi: 10.1186/s13059-016-0951-y.

Song Gao, Wing-Kin Sung, Niranjan Nagarajan. Opera: reconstructing optimal genomic scaffolds with high-throughput paired-end sequences. Journal of Computational Biology, Sept. 2011, doi:10.1089/cmb.2011.0170.

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0951-y

Address of the bookmark: https://sourceforge.net/projects/operasf/

Scripts for the analysis of HGT in genome sequence data.

Jit — Wed, 29 Nov 2017 16:44:10 -0600

Scripts for the analysis of HGT in genome sequence data

Address of the bookmark: https://github.com/reubwn/hgt

Mugsy: multiple whole genome alignment tool

Jit — Fri, 08 Dec 2017 17:41:14 -0600

Mugsy is a multiple whole genome aligner. Mugsy uses Nucmer for pairwise alignment, a custom graph based segmentation procedure for identifying collinear regions, and the segment-based progressive multiple alignment strategy from Seqan::TCoffee. Mugsy accepts draft genomes in the form of multi-FASTA files and does not require a reference genome.

To cite Mugsy, use:

Angiuoli SV and Salzberg SL. Mugsy: Fast multiple alignment of closely related whole genomes.Bioinformatics 2011 27(3):334-4

Address of the bookmark: http://mugsy.sourceforge.net/

Magic-BLAST: a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome.

Jit — Tue, 26 Dec 2017 22:23:39 -0600

Magic-BLAST is a tool for mapping large next-generation RNA or DNA sequencing runs against a whole genome or transcriptome. Each alignment optimizes a composite score, taking into account simultaneously the two reads of a pair, and in case of RNA-seq, locating the candidate introns and adding up the score of all exons. This is very different from other versions of BLAST, where each exon is scored as a separate hit and read-pairing is ignored.

Magic-BLAST incorporates within the NCBI BLAST code framework ideas developed in the NCBI Magic pipeline, in particular hit extensions by local walk and jump (http://www.ncbi.nlm.nih.gov/pubmed/26109056), and recursive clipping of mismatches near the edges of the reads, which avoids accumulating artefactual mismatches near splice sites and is needed to distinguish short indels from substitutions near the edges.

Address of the bookmark: https://ncbi.github.io/magicblast/

CrossMap: a program for convenient conversion of genome coordinates

Jit — Thu, 31 May 2018 06:00:47 -0500

CrossMap is a program for convenient conversion of genome coordinates (or annotation files) between different assemblies (such as Human hg18 (NCBI36) <> hg19 (GRCh37), Mouse mm9 (MGSCv37) <> mm10 (GRCm38)). It supports most commonly used file formats including SAM/BAM, Wiggle/BigWig, BED, GFF/GTF, VCF. CrossMap is designed to liftover genome coordinates between assemblies. It’s not a program for aligning sequences to reference genome. We do not recommend using CrossMap to convert genome coordinates between species.

Address of the bookmark: http://crossmap.sourceforge.net

getopts.pl file

Jit — Fri, 15 Jun 2018 04:43:03 -0500

SSPACE_longread complain for getopts.pl file.

To resolve this, download and have in SSPACED-Longreads folder.

Cheers :)

KAT: a K-mer analysis toolkit to quality control NGS datasets and genome assemblies

Jit — Fri, 06 Jul 2018 03:36:45 -0500

KAT is a suite of tools that analyse jellyfish hashes or sequence files (fasta or fastq) using kmer counts. The following tools are currently available in KAT:

hist: Create an histogram of k-mer occurrences from a sequence file. Adds metadata in output for easy plotting.
gcp: K-mer GC Processor. Creates a matrix of the number of K-mers found given a GC count and a K-mer count.
comp: K-mer comparison tool. Creates a matrix of shared K-mers between two (or three) sequence files or hashes.
sect: SEquence Coverage estimator Tool. Estimates the coverage of each sequence in a file using K-mers from another sequence file.
blob: Given, reads and an assembly, calculates both the read and assembly K-mer coverage along with GC% for each sequence in the assembly.SEquence Coverage estimator Tool.
filter: Filtering tools. Contains tools for filtering k-mer hashes and FastQ/A files:
- kmer: Produces a k-mer hash containing only k-mers within specified coverage and GC tolerances.
- seq: Filters a sequence file based on whether or not the sequences contain k-mers within a provided hash.
plot: Plotting tools. Contains several plotting tools to visualise K-mer and compare distributions. The following plot tools are available:
- density: Creates a density plot from a matrix created with the "comp" tool. Typically this is used to compare two K-mer hashes produced by different NGS reads.
- profile: Creates a K-mer coverage plot for a single sequence. Takes in fasta coverage output coverage from the "sect" tool
- spectra-cn: Creates a stacked histogram using a matrix created with the "comp" tool. Typically this is used to compare a jellyfish hash produced from a read set to a jellyfish hash produced from an assembly. The plot shows the amount of distinct K-mers absent, as well as the copy number variation present within the assembly.
- spectra-hist: Creates a K-mer spectra plot for a set of K-mer histograms produced either by jellyfish-histo or kat-histo.
- spectra-mx: Creates a K-mer spectra plot for a set of K-mer histograms that are derived from selected rows or columns in a matrix produced by the "comp".

In addition, KAT contains a python script for analysing the mathematical distributions present in the K-mer spectra in order to determine how much content is present in each peak.

This README only contains some brief details of how to install and use KAT. For more extensive documentation please visit: https://kat.readthedocs.org/en/latest/

https://academic.oup.com/bioinformatics/article/33/4/574/2664339

Address of the bookmark: https://github.com/TGAC/KAT

Synima: a Synteny imaging tool for annotated genome assemblies

Abhimanyu Singh — Tue, 30 Oct 2018 10:49:13 -0500

Synima written in Perl, which uses the graphical features of R. Synima takes orthologues computed from reciprocal best BLAST hits or OrthoMCL, and DAGchainer, and outputs an overview of genome-wide synteny in PDF. Each of these programs are included with the Synima package, and a pipeline for their use. Synima has a range of graphical parameters including size, colours, order, and labels, which are specified in a config file generated by the first run of Synima – and can be subsequently edited. Synima runs quickly on a command line to generate informative and publication quality figures. Synima is open source and freely available from https://github.com/rhysf/Synima under the MIT License.

Address of the bookmark: https://github.com/rhysf/Synima

ANItools web: a web tool for fast genome comparison within multiple bacterial strains

Jit — Wed, 14 Nov 2018 04:34:23 -0600

ANItools is a software package written by PERL scripts that can be run in a Linux/Unix system. If you want to compare bacterial genomes and calculate their average nucleotide identity (ANI), you could download and run this program directly. Or you could send us the genome sequence by email. Then we will do the analysis work for you.

https://academic.oup.com/database/article/doi/10.1093/database/baw084/2630454

Address of the bookmark: http://ani.mypathogen.cn/

Purge Haplotigs: Pipeline to help with curating heterozygous diploid genome assemblies

Rahul Nayak — Mon, 17 Dec 2018 03:17:20 -0600

Some parts of a genome may have a very high degree of heterozygosity. This causes contigs for both haplotypes of that part of the genome to be assembled as separate primary contigs, rather than as a contig and an associated haplotig. This can be an issue for downstream analysis whether you're working on the haploid or phased-diploid assembly.

Identify pairs of contigs that are syntenic and move one of them to the haplotig 'pool'. The pipeline uses mapped read coverage and Minimap2 alignments to determine which contigs to keep for the haploid assembly. Dotplots are optionally produced for all flagged contig matches, juxtaposed with read-coverage, to help the user determine the proper assignment of any remaining ambiguous contigs. The pipeline will run on either a haploid assembly (i.e. Canu, FALCON or FALCON-Unzip primary contigs) or on a phased-diploid assembly (i.e. FALCON-Unzip primary contigs + haplotigs). Here are two examples of how Purge Haplotigs can improve a haploid and diploid assembly.

Address of the bookmark: https://bitbucket.org/mroachawri/purge_haplotigs