List of analysis tools developed for Oxford Nanopore data

BWA
Fast nanopore data tuned alignment tool
https://github.com/lh3/bwa

GraphMap
Mapper for long and error-prone reads
https://github.com/isovic/graphmap

LAST
Nanopore tuned alignment tool
http://last.cbrc.jp/

LINKS
Software tool for long read scaffolding
https://github.com/warrenlr/LINKS/

marginAlign
Tools to align nanopore reads to a reference
https://github.com/benedictpaten/marginAlign

minoTour
Real time analysis tools
http://minotour.nottingham.ac.uk/

nanoCORR
Error-correction tool for nanopore sequence data
https://github.com/jgurtowski/nanocorr

NanoOK
Software for nanopore data, quality and error profiles
https://documentation.tgac.ac.uk/display/NANOOK/NanoOK

Nanopolish
Nanopore analysis and genome assembly software
https://github.com/jts/nanopolish

nanopore
Variant-detection tool for nanopore sequence data
https://github.com/mitenjain/nanopore

Nanocorrect
Error-correction tool for nanopore sequence data
https://github.com/jts/nanocorrect/

npReader
Real-time conversion and analysis of nanopore reads
https://github.com/mdcao/npReader

poRe
Tool for analyzing and visualizing nanopore data
https://sourceforge.net/p/rpore/wiki/Home/

PoreSeq
Error-correction and variant-calling software
https://github.com/tszalay/poreseq

Poretools
Nanopore sequence analysis and visualization software
https://github.com/arq5x/poretools

SSPACE-LongRead
Genome scaffolding tool
http://www.baseclear.com/genomics/bioinformatics/basetools/SSPACE-longread

SMIS
Genome scaffolding tool
https://sourceforge.net/projects/phusion2/files/smis/

List of assemblers for Oxford Nanopore MinION long reads

LQS
DALIGNER, Celera OLC Nanocorrect,
Nanopolish corrector
https://github.com/jts/nanopolish

PBcR
HGAP or BLASR, Celera OLC
PBcR corrector
http://wgs-assembler.sourceforge.net/wiki/index.php/PBcR
–
Canu
MHAP, Celera OLC
Canu corrector
https://github.com/marbl/canu

Falcon
String graph, Celera OLC
Falcon corrector
https://github.com/PacificBiosciences/falcon

Miniasm
OLC
https://github.com/lh3/miniasm

ra-integrate
OLC
https://github.com/mariokostelac/ra-integrate/

ALLPATHS-LG
de Bruijn graph
ALLPATHS-L corrector
https://www.broadinstitute.org/software/allpaths-lg/blog/?page_id=12

SPAdes
de Bruijn graph
SPAdes corrector
http://bioinf.spbau.ru/spades

Take a look at the PRICE software from the DeRisi lab. Its meant to do something very similar. http://derisilab.ucsf.edu/index.php?page=software

You could also look at SSPACE (http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/sspacev12/), ATLAS tools (http://www.hgsc.bcm.tmc.edu/content/bcm-hgsc-software), and SCARPA (http://compbio.cs.toronto.edu/hapsembler/scarpa.html).

See the PAGIT protocol: http://www.sanger.ac.uk/resources/software/pagit/

In particular, take a look at the IMAGE tool: http://genomebiology.com/2010/11/4/R41

Also SOAPdenovo has ha function for scaffolding. Not sure about ABYSS

Here there is a useful explanation of several tools.

https://bioinformaticsonline.com/search?q=scaffolding&entity_type=object&entity_subtype=bookmarks&offset=0&search_type=entities

I could be wrong, but the above answers to your hypothetical scenario appear to miss the point that you aren't interested in assembling the full genome, just the 100 kb part you're interested in. I suggest the following algorithm:

1. Start with the initial assembly C0 of the contigs you have identified as overlapping your region of interest, and the set S of reads those contigs contain. Let C = C0.

2. Repeat:
a. Identify paired-end reads (not in C) for which one or both ends align within, or extending, contigs in C.
b. Identify unpaired reads that align extending these new paired-end reads.
c. Construct a new assembly C' from C and the new reads identified in (a) and (b).
d. Trim C' so it does not extend more than 100 kb to either end of C0. Set C = C'.
e. Let S' denote the reads that contribute to C'. If S' does not contain any reads not present in S, stop. Otherwise, Set S = S'.

3. If you don't have a complete assembly of the region of interest, generate an STS for each end of each contig, probe a library for clones including these STSes, subclone these clones into a paired-end sequencing vector, and generate paired-end reads for this library; then try steps (1) and (2) again, adding these new sequencing reads to what you had before.

4. If your average sequencing depth for the region of interest exceeds 25 or so without filling all gaps, it is likely that the remaining gaps represent sequences that are not getting cloned in your sequencing vectors. Try different sequencing vectors.

Address of the bookmark: https://www.molinspiration.com/

https://academic.oup.com/bioinformatics/article/35/12/2153/5162749

Address of the bookmark: https://github.com/arzwa/wgd

Adapter sequences:
Optimal enzymes for amplifying sequencing libraries.
Quail, M. a et al. Nat. Methods 9, 10-1 (2012).

GAGE:
GAGE: A critical evaluation of genome assemblies and assembly algorithms.
Salzberg, S. L. et al. Genome Res. 22, 557-67 (2012).

KMC:
Disk-based k-mer counting on a PC.
Deorowicz, S., Debudaj-Grabysz, A. & Grabowski, S. BMC Bioinformatics 14, 160 (2013).

Kraken:
Kraken: ultrafast metagenomic sequence classification using exact alignments.
Wood, D. E. & Salzberg, S. L. Genome Biol. 15, R46 (2014).

MUMmer:
Versatile and open software for comparing large genomes.
Kurtz, S. et al. Genome Biol. 5, R12 (2004).

R:
R: A language and environment for statistical computing.
R Core Team (2013). R Foundation for Statistical Computing, Vienna, Austria. URL http://www.R-project.org/.

RATT:
RATT: Rapid Annotation Transfer Tool.
Otto, T. D., Dillon, G. P., Degrave, W. S. & Berriman, M. Nucleic Acids Res. 39, e57 (2011).

SAMtools:
The Sequence Alignment/Map format and SAMtools.
Li, H. et al. Bioinformatics 25, 2078-9 (2009).

Trimmomatic:
Trimmomatic: A flexible trimmer for Illumina Sequence Data.
Bolger, A. M., Lohse, M. & Usadel, B. Bioinformatics 1-7 (2014).

Address of the bookmark: https://biokit.readthedocs.io/en/latest/index.html

• Assembly of nanopore reads using Canu.
• Polish canu contigs using racon (optional).
• Map a paired-end Illumina dataset onto the contigs obtained in the previous steps using BWA mem.
• Perform correction of contigs using pilon and the Illumina dataset.

Address of the bookmark: https://github.com/nanoporetech/ont-assembly-polish

• dnaPipeTE is developped by Clément Goubert, Laurent Modolo and the TREEP team of the LBBE: http://lbbe.univ-lyon1.fr/-Equipe-Elements-transposables-.html?lang=en

• You can find the original publication in GBE here: https://academic.oup.com/gbe/article/7/4/1192/533768

output examples of quantification and TE landscape (relative age) produced by dnaPipeTE

Address of the bookmark: https://github.com/clemgoub/dnaPipeTE

Ra is in development since 2014 in the form of several separate components that used to be run individually.
This project aims to ease the usage of Ra by integrating it into a complete de novo assembly tool.

Unlike other state-of-the-art assemblers, Ra does not have an error correction step. Instead, it relies on detecting overlaps using a very sensitive and specific overlapper ("graphmap -w owler", https://github.com/isovic/graphmap) and constructing and reducing an overlap graph (Ra layout, https://github.com/mariokostelac/ra).

Address of the bookmark: https://github.com/mariokostelac/ra-integrate/