BOL: Related items

COPE: an accurate k-mer-based pair-end reads connection tool to facilitate genome assembly

Jit — Wed, 06 Dec 2017 02:08:14 -0600

An efficient tool called Connecting Overlapped Pair-End (COPE) reads, to connect overlapping pair-end reads using k-mer frequencies. We evaluated our tool on 30× simulated pair-end reads from Arabidopsis thaliana with 1% base error. COPE connected over 99% of reads with 98.8% accuracy, which is, respectively, 10 and 2% higher than the recently published tool FLASH. When COPE is applied to real reads for genome assembly, the resulting contigs are found to have fewer errors and give a 14-fold improvement in the N50 measurement when compared with the contigs produced using unconnected reads.

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

QUAST-LG: Versatile genome assembly evaluation

Jit — Thu, 25 Oct 2018 10:46:55 -0500

QUAST-LG-a tool that compares large genomic de novo assemblies against reference sequences and computes relevant quality metrics. Since genomes generally cannot be reconstructed completely due to complex repeat patterns and low coverage regions, we introduce a concept of upper bound assembly for a given genome and set of reads, and compute theoretical limits on assembly correctness and completeness. Using QUAST-LG, we show how close the assemblies are to the theoretical optimum, and how far this optimum is from the finished reference.

AVAILABILITY AND IMPLEMENTATION:

http://cab.spbu.ru/software/quast-lg

Address of the bookmark: http://cab.spbu.ru/software/quast-lg/

REAPR: a universal tool for genome assembly evaluation

Jitendra Prajapati — Wed, 06 Apr 2016 18:26:31 -0500

REAPR is a tool that evaluates the accuracy of a genome assembly using mapped paired end reads, without the use of a reference genome for comparison. It can be used in any stage of an assembly pipeline to automatically break incorrect scaffolds and flag other errors in an assembly for manual inspection. It reports mis-assemblies and other warnings, and produces a new broken assembly based on the error calls.

The software requires as input an assembly in FASTA format and paired reads mapped to the assembly in a BAM file. Mapping information such as the fragment coverage and insert size distribution is analysed to locate mis-assemblies. REAPR works best using mapped read pairs from a large insert library (at least 1000bp). Additionally, if a short insert Illumina library is also available, REAPR can combine this with the large insert library in order to score each base of the assembly.

http://www.sanger.ac.uk/science/tools/reapr

Address of the bookmark: https://genomebiology.biomedcentral.com/articles/10.1186/gb-2013-14-5-r47

BUSCO: Assessing genome assembly and annotation completeness with Benchmarking Universal Single-Copy Orthologs

Anjana — Tue, 10 May 2016 07:46:24 -0500

High-throughput genomics has revolutionized biological research, however, while the number of sequenced genomes grows by the day, quality assessment of the resulting assembled sequences remains complicated and mostly limited to technical measures like N50.
BUSCO provides measures for quantitative assessment of genome assembly, gene set, and transcriptome completeness based on evolutionarily informed expectations of gene content from near-universal single-copy orthologs selected from OrthoDB.
BUSCO assessments are implemented in open-source software, with comprehensive lineage-specific sets of Benchmarking Universal Single-Copy Orthologs for arthropods, vertebrates, metazoans, fungi, eukaryotes, and bacteria.
These conserved orthologs are ideal candidates for large-scale phylogenomics studies, and the annotated BUSCO gene models built during genome assessments provide a comprehensive gene predictor training set for use as part of genome annotation pipelines.
BUSCO assessments offer intuitive metrics, based on evolutionarily informed expectations of gene content from hundreds of species, to gauge completeness of rapidly accumulating genomic data and satisfy an Iberian's quest for quality - "Busco calidad/qualidade".

Address of the bookmark: http://busco.ezlab.org/

Ensembl Variation - Calculated variant consequences

Jit — Sun, 09 Sep 2018 19:17:37 -0500

For each variant that is mapped to the reference genome, we identify all overlapping Ensembl transcripts. We then use a rule-based approach to predict the effects that each allele of the variant may have on each transcript. The set of consequence terms, defined by the Sequence Ontology (SO), that can be currently assigned to each combination of an allele and a transcript is shown in the table below. Note that each allele of each variant may have a different effect in different transcripts.

Address of the bookmark: https://www.ensembl.org/info/genome/variation/prediction/predicted_data.html

ALE: a Generic Assembly Likelihood Evaluation Framework for Assessing the Accuracy of Genome and Metagenome Assemblies

Neel — Tue, 26 Apr 2016 03:38:43 -0500

Assembly Likelihood Evaluation (ALE) framework that overcomes these limitations, systematically evaluating the accuracy of an assembly in a reference-independent manner using rigorous statistical methods. This framework is comprehensive, and integrates read quality, mate pair orientation and insert length (for paired-end reads), sequencing coverage, read alignment and k-mer frequency. ALE pinpoints synthetic errors in both single and metagenomic assemblies, including single-base errors, insertions/deletions, genome rearrangements and chimeric assemblies presented in metagenomes. At the genome level with real-world data, ALE identifies three large misassemblies from the Spirochaeta smaragdinae finished genome, which were all independently validated by Pacific Biosciences sequencing. At the single-base level with Illumina data, ALE recovers 215 of 222 (97%) single nucleotide variants in a training set from a GC-rich Rhodobacter sphaeroides genome. Using real Pacific Biosciences data, ALE identifies 12 of 12 synthetic errors in a Lambda Phage genome, surpassing even Pacific Biosciences' own variant caller, EviCons. In summary, the ALE framework provides a comprehensive, reference-independent and statistically rigorous measure of single genome and metagenome assembly accuracy, which can be used to identify misassemblies or to optimize the assembly process.

More at http://www.ncbi.nlm.nih.gov/pubmed/23303509

Address of the bookmark: http://sc932.github.io/ALE/about.html

Hagfish - assess an assembly through creative use of coverage plots

Abhi — Fri, 20 May 2016 19:08:17 -0500

Hagfish is a tool that is to be used in data analysis of Next Generation Sequencing (NGS) experiments. Hagfish builds on the concept of coverage plots and aims to assist (amongst others) in quality control of de novo genome assembly or identification of structural variation in a genome re-sequencing experiment.

Hagfish requires a reference sequence and a paired end re-sequencing data set. Hagfish has more power the larger the insert size of the paired end library is.

Quick links: Installation,Operation, Read mappers, Hagfish scripts, Hagfish plots

Address of the bookmark: https://github.com/mfiers/hagfish

Evaluation of genome assembly software based on long reads

BioStar — Fri, 01 Feb 2019 11:55:54 -0600

TGS technologies have been used to produce highly accurate de novo assemblies of hundreds of microbial genomes and highly contiguous reconstructions of many dozens of plant and animal genomes, enabling new insights into evolution and sequence diversity. They have also been applied to resequencing analyses, to create detailed maps of structural variations in many species. Also, these new technologies have been used to fill in many of the gaps in the human reference genome.

In this report, we compare and evaluate several genome assembly software based on TSG technology. The experimentation has been performed on 4 reference genomes and the results evaluated with the QUAST software. The 11 software that have been evaluated are: Celera Assembler , Falcon , Miniasm, Newbler , SGA Assembler, Smartdenovo, Abruijn, Ra, DBG2OLC, Spades and Cerulean. The first 8 software use only long reads, while the 3 last software can merge long and short reads

The Genome 10K Project

Tue, 29 Jul 2014 09:11:04 -0500

https://genome10k.soe.ucsc.edu The Genome 10K project aims to assemble a genomic zoo—a collection of DNA sequences representing the genomes of 10,000 vertebrate species, approximately one for every vertebrate genus. The trajectory of cost reduction in DNA sequencing suggests that this project will be feasible within a few years. Capturing the genetic diversity of vertebrate species would create an unprecedented resource for the life sciences and for worldwide conservation efforts. The growing Genome 10K Community of Scientists (G10KCOS), made up of leading scientists representing major zoos, museums, research centers, and universities around the world, is dedicated to coordinating efforts in tissue specimen collection that will lay the groundwork for a large-scale sequencing and analysis project.

LACHESIS: Genome Assembly with Hi-C-based Contact Probability Maps (LACHESIS)

Jit — Mon, 14 May 2018 04:26:30 -0500

LACHESIS is method that exploits contact probability map data (e.g. from Hi-C) for chromosome-scale de novo genome assembly.

Further information about LACHESIS, including source code, documentation and a user's guide are available at: http://shendurelab.github.io/LACHESIS.

Manuscript describing LACHESIS was published as: Burton JN#, Adey A, Patwardhan RP, Qiu R, Kitzman JO, Shendure J#. Chromosome-scale scaffolding of de novo genome assemblies based on chromatin interactions. Nature Biotechnology 2013 Dec;31(12):1119-25. doi: 10.1038/nbt.272. PubMed PMID: 24185095.

http://shendurelab.github.io/LACHESIS/

Address of the bookmark: http://shendurelab.github.io/LACHESIS/