A list of programs for genotype and SNP calling :

SOAP2 http://soap.genomics.org.cn/index.html

Single-sample High-quality variant database (for example, dbSNP) Package for NGS data analysis, which includes a single individual genotype caller (SOAPsnp)

realSFS http://128.32.118.212/thorfinn/realSFS/

Single-sample Aligned reads Software for SNP and genotype calling using single individuals and allele frequencies. Site frequency spectrum (SFS) estimation

Samtools http://samtools.sourceforge.net/

Multi-sample Aligned reads Package for manipulation of NGS alignments, which includes a computation of genotype likelihoods (samtools) and SNP and genotype calling (bcftools)

GATK http://www.broadinstitute.org/gsa/wiki/index.php/The_Genome_Analysis_Toolkit Multi-sample Aligned reads Package for aligned NGS data analysis, which includes a SNP and genotype caller (Unifed Genotyper), SNP filtering (Variant Filtration) and SNP quality recalibration (Variant Recalibrator)

Beagle http://faculty.washington.edu/browning/beagle/beagle.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation, phasing and association that includes a mode for genotype calling

IMPUTE2 http://mathgen.stats.ox.ac.uk/impute/impute_v2.html

Multi-sample LD Candidate SNPs, genotype likelihoods Software for imputation and phasing, including a mode for genotype calling. Requires fine-scale linkage map

QCall ftp://ftp.sanger.ac.uk/pub/rd/QCALL

Multi-sample LD ‘Feasible’ genealogies at a dense set of loci, genotype likelihoods Software for SNP and genotype calling, including a method for generating candidate SNPs without LD information (NLDA) and a method for incorporating LD information (LDA). The ‘feasible’ genealogies can be generated using Margarita (http://www.sanger.ac.uk/resources/software/margarita)

MaCH http://genome.sph.umich.edu/wiki/Thunder

Multi-sample LD Genotype likelihoods Software for SNP and genotype calling, including a method (GPT_Freq) for generating candidate SNPs without LD information and a method (thunder_glf_freq) for incorporating LD information

I have used the following assemblers

• Spades (v. 3.10.1)
• CANU (v. 1.6)
• Unicycler (v. v0.4.1)
• Miniasm (v. 0.2-r137-dirty)

I have used the following mappers

• minimap2 (v. 2.0rc1-r232)
• minimap (v. 0.2-r124-dirty)
• bwa (v. 0.7.12-r1039)

I have used the following polishing tools

• Racon (v. not available)
• Pilon (v. 1.18)
• Nanopolish (v. 0.8.3)

I have used the following tools to assess genome assembly characteristics

• ANI.pl (https://github.com/chjp/ANI)
• CheckM (v. 1.0.7)
• Prokka (v. 1.12)
• QUAST (v. 2.3)
• mummer (v. not available)

If you have any ideas or superior tools we have missed please let us know in the comments.

More at https://dahak-metagenomics.github.io/dahak/

Address of the bookmark: https://github.com/dahak-metagenomics/dahak

This also includes:

• A2Amapper: ATAC, Assembly to Assembly Comparision tool:
  • Comparative mapping between two genome assemblies (same species), or between two different genomes (cross species).

• Sim4db:
  • Spliced alignment of cDNA and genomic sequences, from the same (sim4) or related (sim4cc) species. Optimized for high-throughput batched alignment.

• LEAFF:
  • LEAFF (ahem, Let's Extract Anything From Fasta) is a utility program for working with multi-fasta files. In addition to providing random access to the base level, it includes several analysis functions.

• Meryl:
  • An out-of-core k-mer counter. The amount of sequence that can be processed for any size k depends only on the amount of free disk space.

Address of the bookmark: https://help.rc.ufl.edu/doc/Kmer

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

Variant calling and/or genotyping

• DiscoSNP++ and discoSnpRAD: Reference-free small variant discovery (SNPs and indels)
• MindTheGap: Detection and assembly of large insertion variants
• TakeABreak: reference-free inversion discovery tool
• SVJedi: Structural Variant genotyper with long read data
• SVJedi-graph: Structural Variant genotyper with long read data using a variation graph

Sequence assembly

• MinYS: reference-guided genome assembly in metagenomics data
• MTG-link: local assembly tool for linked-read data
• Minia: De novo short read assembler
• de-novo pipeline: de-novo assembly pipeline (error correction / contigs / scaffolding) for genomes and meta-genomes
• Mapsembler2: Targeted assembly (not maintained)

Managing k-mers & indexation

• findere: simple strategy for speeding up queries and for reducing false positive calls from any Approximate Membership Query data structure.
  • fimpera extends findere adding the abundance information.
• kmtricks: modular tool suite for counting kmers, and constructing Bloom filters or kmer matrices, for large collections of sequencing data.
• kmindex is a tool for indexing and querying sequencing samples. It is built on top of kmtricks.
• back to sequences: Find sequences (reads, unitigs, genes) related to a set of kmers in large datasets, in a matter of seconds.
• Backpack Quotient Filter: k-mer indexing data structure with abundance
• short read connector: Detect similar reads from potentially large read set
• DSK: Count K-mer in sequences

Pangenome graph manipulation

• Pancat: Pangenome Comparison and Analysis Toolkit
• GFAGraphs: a Python library to handle pangenome graph files in GFA format.

Comparative metagenomics with k-mers

• Simka and SimkaMin: Comparative metagenomics for large-scale datasets
• Comparead & Commet: comparison of metagenomic datasets

Species and bacterial strains identification

• ORI: software using long nanopore reads to identify bacteria present in a sample at the strain level
• StrainFLAIR: STRAIN-level proFiLing using vArIation gRaph

General-purpose sequencing data manipulation

• GASSST: long read mapper
• Leon: short read compressor (now included in GATB-core)
• Bloocoo: short read corrector
• BCALM: Construct compacted de Bruijn graphs (unitigs)

 Protein Structure

• A_Purva: Contact Map Overlap solver
• MD-Jeep: Distance Geometry solver
• CSA: Comparative Structural Alignment

Workflow

• SLICEE: parallel execution of bioinformatics workflows

Comparative Genomics

• CASSIS: detection of rearrangement breakpoints
• PLAST: intensive bank-to-bank sequence comparison
• DRJBreakpointFinder: detection and precise localization of excision sites in proviral segments

As a computational genomicists our work involves examining billions of DNA base pairs and interpreting how variation impacts basic biology and disease. We develop computational methods and resources for the functional annotation of genomes with a special emphasis on sequencing-based assays (e.g. ChIP-seq, RNA-Seq, exome- and whole-genome sequencing, single-cell analysis).

http://www.computationalgenomics.ca

More at http://www.bx.psu.edu/~rsharris/lastz/

Thesis: http://www.bx.psu.edu/~rsharris/rsharris_phd_thesis_2007.pdf

Address of the bookmark: http://www.bx.psu.edu/~rsharris/lastz/

Address of the bookmark: http://bioinformatics.ua.pt/software/smash/