BOL: Related items

Ancient whole genome duplication (WGD) detection tools !

Rahul Nayak — Sun, 07 Mar 2021 00:32:44 -0600

There are two methods for ancient WGD detection, one is collinearity analysis, and the other is based on the Ks distribution map. Among them, Ks is defined as the average number of synonymous substitutions at each synonymous site, and there is also a Ka corresponding to it, which refers to the average number of non-synonymous substitutions at each non-synonymous site.

At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

For more reading - There are 9 sub-modules in WGD

kde: KDE fitting to the Ks distribution
ksd: Ks distribution construction
mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
mix: Hybrid modeling of Ks distribution.
pre: preprocess the CDS file
syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
viz: draw histogram and density plot
wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

RagTag: a collection of software tools for scaffolding and improving modern genome assemblies

Jit — Sat, 11 Sep 2021 00:28:14 -0500

RagTag is a collection of software tools for scaffolding and improving modern genome assemblies. Tasks include:

Homology-based misassembly correction
Homology-based assembly scaffolding and patching
Scaffold merging

Address of the bookmark: https://github.com/malonge/RagTag

Mitochondrial genome assembly tools !

Abhi — Wed, 06 Sep 2023 00:37:18 -0500

Mitochondrial genome assembly tools are specialized software and algorithms designed to accurately reconstruct the mitochondrial genome (mitogenome) from sequencing data, typically obtained through techniques like next-generation sequencing (NGS). The mitochondrial genome is relatively small compared to the nuclear genome, making it an ideal target for assembly. Here are some commonly used mitochondrial genome assembly tools:

MitoFinder: Mitofinder is a pipeline to assemble mitochondrial genomes and annotate mitochondrial genes from trimmed read sequencing data.

MitoHiFi: a python pipeline for mitochondrial genome assembly from PacBio high fidelity reads

MITObim: MITObim is a tool specifically developed for the iterative assembly of mitochondrial genomes. It starts with a reference mitogenome and iteratively refines the assembly using the read data.

MITOS: MITOS is a web-based platform that provides a pipeline for annotating mitochondrial genomes. It integrates multiple software tools for assembly, annotation, and visualization of mitogenomes.

MIRA: MIRA (Mimicking Intelligent Read Assembly) is a versatile genome assembly tool that can be used for mitochondrial genome assembly. It supports various sequencing technologies and allows for reference-based or de novo assembly.

NOVOPlasty: NOVOPlasty is a user-friendly tool designed for de novo assembly of organelle genomes, including mitochondria. It utilizes a seed-and-extend algorithm and is suitable for both short-read and long-read data.

MITOS2: MITOS2 is an updated version of the MITOS pipeline, which automates the annotation of mitochondrial genomes. It provides improved accuracy and additional features for mitochondrial genome analysis.

GetOrganelle: While primarily designed for chloroplast genome assembly, GetOrganelle can also be used for mitochondrial genome assembly. It is particularly useful for dealing with high-throughput sequencing data.

SPAdes: SPAdes (St. Petersburg genome assembler) is a versatile genome assembly tool that can be employed for mitochondrial genome assembly, especially when dealing with complex datasets that may contain nuclear mitochondrial DNA sequences (numts).

IDBA-UD: IDBA-UD (Iterative De Bruijn Graph De Novo Assembler) is another de novo assembly tool that can be used for mitochondrial genome assembly, especially in cases with relatively low coverage.

Velvet: Velvet is a de novo assembly tool that can be applied to mitochondrial genome assembly, especially when working with short-read data.

When selecting a mitochondrial genome assembly tool, it's important to consider the specific characteristics of your sequencing data, such as read length and coverage, as well as the complexity of the mitochondrial genome. Additionally, some tools are better suited for specific organisms or research objectives, so choosing the right tool will depend on your particular project requirements.

Bourque Lab

Mon, 14 Jan 2019 15:39:25 -0600

The goal of the lab is to understand mammalian genomes using comparative genomic and epigenomic analyses. Areas of interest include: the evolution of regulatory sequences, the role of transposable elements in gene regulation and the impact of genome rearrangements in evolution and cancer.

As a computational genomicists our work involves examining billions of DNA base pairs and interpreting how variation impacts basic biology and disease. We develop computational methods and resources for the functional annotation of genomes with a special emphasis on sequencing-based assays (e.g. ChIP-seq, RNA-Seq, exome- and whole-genome sequencing, single-cell analysis).

http://www.computationalgenomics.ca

LASTZ

Abhi — Mon, 18 Apr 2016 04:41:55 -0500

LASTZ is a program for aligning DNA sequences, a pairwise aligner. Originally designed to handle sequences the size of human chromosomes and from different species, it is also useful for sequences produced by NGS sequencing technologies such as Roche 454.

More at http://www.bx.psu.edu/~rsharris/lastz/

Thesis: http://www.bx.psu.edu/~rsharris/rsharris_phd_thesis_2007.pdf

Address of the bookmark: http://www.bx.psu.edu/~rsharris/lastz/

Smash: An alignment-free method to find and visualise rearrangements between pairs of DNA sequences

Jit — Tue, 26 Apr 2016 12:18:49 -0500

Smash is a completely alignment-free method/tool to find and visualise genomic rearrangements. The detection is based on conditional exclusive compression, namely using a FCM (Markov model), of high context order (typically 20). For visualisation, Smash outputs a SVG image, with an ideogramoutput architecture, where the patterns are represented with several HSV values (only value varies). The method can perform both in small- and large-scale. Nevertheless is more directed to large-scale since that the main aim of the research is to know where the large-scale [chromosomal by chromosome] of several primates was equal/different, having at a glance a map of the entire genomes.

Address of the bookmark: http://bioinformatics.ua.pt/software/smash/

Edanchin Lab

Thu, 19 Nov 2020 08:00:07 -0600

My main topics of interest are:

The impact of non tree-like evolution such as horizontal gene transfers and hybridization on species biology
Evolution and adaptation of animals in the absence of sexual reproduction and the underlying mechanisms
Genomic signatures of adaptation to a parasitic life-style

More at https://edanchin.org/

Khalturin Lab

Wed, 06 May 2026 19:04:26 -0500

Our lab focuses on the comparative genomics and developmental biology of basal metazoans, particularly on jellyfish and hydra models. We are interested in understanding the molecular mechanisms underlying stem cell dynamics, regeneration, and the evolutionary origins of these processes in early-diverging animal lineages.

More at https://jellyfish.icob.sinica.edu.tw/index.html

Fiona Brinkman Laboratory

Sun, 14 Jul 2013 12:46:31 -0500

Infectious disease control needs to be made more “sustainable”. We need to reduce selective pressure on pathogens to evolve antibiotic resistance. We need to control infectious disease outbreaks and associated immune disorders with a better understanding of the genetic, environmental and social factors that impact disease spread and severity.

Research Area

Investigating the role in disease of both the microbe and its host (i.e immune system failure), using genomics and systems biology-based approaches
Using genomics and network analysis to characterize disease outbreaks and their environmental/social/genetic causes, and
Identifying new anti-infective and immune modulating therapies/biomarkers.

Link @ http://www.brinkman.mbb.sfu.ca/

BioProgramming

Jitendra Narayan — Sun, 14 Jul 2013 16:29:53 -0500

The completion of the first human genome drafts was just a start of the modern DNA sequencing era which resulted in further invention, improved development toward new advanced strategies of high-throughput DNA sequencing, so called the “high-throughput next generation sequencing” (HT-NGS). The decreasing genome sequencing cost and desire to explore and understand biological machanism at genomic level, speed up the genomic sequencing projects. In the fast growing HT-NGS technologies, the main challenge is to cope with the analysis of vast production of sequencing database through advanced bioinformatics tools. In oder to develope sotware/tools bioinformatician/ biological programmers need to expertise in any one one the programming language. However, sometime one language are not enough to handle all sort of biological needs, which compel us to learn new biologically suitable language to handle ever growing genome or protein sequences.

The next step after reading genetic code is writing a script to analyse and explore the hidden information. This tutorial is aimed to introduce you new biological programming languages with their packages/libraries, and assist in your scripting work.

Navigate the sub-section of this page [ see right hand side of the page for it ]