The ongoing 2014 West Africa Ebola outbreak is considered to be the largest and longest outbreak ever recorded of Ebola, killing at least 932 people and infecting more than 1,700 till date since March in Sierra Leone, Guinea, Nigeria and Liberia.

Hence, the World Health Organisation (WHO) on 8 August, 2014 declared the killer Ebola epidemic ravaging parts of West Africa an international health emergency.

Causes

EVD is caused by infection with a virus of the family Filoviridae, genus Ebolavirus. While there are five identified sub-species of Ebolavirus, four viruses cause disease in humans. They are Bundibugyo virus (BDBV), Ebola virus (EBOV), Sudan virus (SUDV), Taï Forest virus (TAFV).

The fifth virus, Reston virus (RESTV), is not considered to be disease-causing in humans.

According to WHO, EVD first appeared in 1976 in two simultaneous outbreaks, in Nzara, Sudan, and in Yambuku, Democratic Republic of Congo. The latter was in a village situated near the Ebola River from which the disease takes its name.

How does it spread?

It is still unclear how Ebola spreads. However, it is believed that the first pateint becomes infected through contact with an infected animal's body fluids.

Human-to-human transmission can occur through direct contact with blood, organs or other body fluids of infected people or exposure to objects such as needles and syringes that have been contaminated with infected secretions.

Ebola can also be transmitted from men who have recovered from the disease through semen as it is infectious for up to 7 weeks.

Infected dead bodies can spread Ebola as they are still infectious. So mourners who have direct contact with the body of deceased person can also get the disease.

Who is most at risk?

Health-care workers who do not wear appropriate protective clothing and family members who are in close contact with infected people or deceased patients.

Signs and symptoms:

Symptoms may occur between 2 and 21 days after contracting the infection. Common signs of Ebola include:

Fever

Headache

Muscle, abdominal and joint pain

Sore throat

Weakness

Diarrhea

Vomit or cough up blood

Chest pain

Difficulty in breathing and swallowing

Rash

Hiccups

Bleeding inside and outside the body

Prevention

Currently there is no vaccine available for humans. But the infection can be controlled through the use of recommended protective measures such as:

Avoid contacting infected blood or secretions, including from those who are dead .

Using standard precautions for all patients in the healthcare setting.

Sterilizing equipment, and wearing protective clothing including masks, gloves, gowns and goggles.

Washing your hands with soaps or detergents.

Disinfecting your surroundings.

Isolate people who have Ebola symptoms.

Culling of infected animals, with close supervision of burial or incineration of carcasses.

Yet, not travelling to the areas or countries where the virus is found is the best way to avoid Ebola.

Zoonotic Henipavirus

https://pubmed.ncbi.nlm.nih.gov/35921459/

https://www.ncbi.nlm.nih.gov/nuccore/OM069646,,OM069567,OM069568,OM069569,OM069570,OM069571,OM069572,OM069573,OM069574,OM069575,OM069576,OM069577,OM069578,OM069579,OM069580,OM069581,OM069582,OM069583,OM069584,OM069585,OM069586,OM069587,OM069588,OM069589,OM069590,OM069591,OM069592,OM069593,OM069594,OM069595,OM069596,OM069597,OM069598,OM069599,OM069600,OM069601,OM069602,OM069603,OM069604,OM069605,OM069606,OM069607,OM069608,OM069609,OM069610,OM069611,OM069612,OM069613,OM069614,OM069615,OM069616,OM069617,OM069618,OM069619,OM069620,OM069621,OM069622,OM069623,OM069624,OM069625,OM069626,OM069627,OM069628,OM069629,OM069630,OM069631,OM069632,OM069633,OM069634,OM069635,OM069636,OM069637,OM069638,OM069639,OM069640,OM069641,OM069642,OM069643,OM069644,OM069645,OM069646

Source: Life technologies

Address of the bookmark: http://www.lifetechnologies.com/global/en/home/communities-social/blog/blogs/sequencing-solutions-to-world-health.html?cid=social_blogseries_20130829_11098264

Adapter sequences:
Optimal enzymes for amplifying sequencing libraries.
Quail, M. a et al. Nat. Methods 9, 10-1 (2012).

GAGE:
GAGE: A critical evaluation of genome assemblies and assembly algorithms.
Salzberg, S. L. et al. Genome Res. 22, 557-67 (2012).

KMC:
Disk-based k-mer counting on a PC.
Deorowicz, S., Debudaj-Grabysz, A. & Grabowski, S. BMC Bioinformatics 14, 160 (2013).

Kraken:
Kraken: ultrafast metagenomic sequence classification using exact alignments.
Wood, D. E. & Salzberg, S. L. Genome Biol. 15, R46 (2014).

MUMmer:
Versatile and open software for comparing large genomes.
Kurtz, S. et al. Genome Biol. 5, R12 (2004).

R:
R: A language and environment for statistical computing.
R Core Team (2013). R Foundation for Statistical Computing, Vienna, Austria. URL http://www.R-project.org/.

RATT:
RATT: Rapid Annotation Transfer Tool.
Otto, T. D., Dillon, G. P., Degrave, W. S. & Berriman, M. Nucleic Acids Res. 39, e57 (2011).

SAMtools:
The Sequence Alignment/Map format and SAMtools.
Li, H. et al. Bioinformatics 25, 2078-9 (2009).

Trimmomatic:
Trimmomatic: A flexible trimmer for Illumina Sequence Data.
Bolger, A. M., Lohse, M. & Usadel, B. Bioinformatics 1-7 (2014).

A tool for restriction digest of longuser's sequences is available.

Address of the bookmark: http://insilico.ehu.es/digest/

The biggest and perhaps most fearsome of the world's big cats, the tiger, shares 95.6 percent of its DNA with humans' cute and furry companions, domestic cats.

The new research showed that big cats have genetic mutations that enabled them to be carnivores. The team also identified mutations that allow snow leopards to thrive at high altitudes.

Reference:

http://www.nbcnews.com/science/your-cat-ferocious-tigers-share-lot-95-6-percent-their-4B11182690

http://timesofindia.indiatimes.com/home/environment/flora-fauna/Gene-mapping-of-tiger-completed/articleshow/22671681.cms

Paper:

http://www.nature.com/ncomms/2013/130917/ncomms3433/full/ncomms3433.html

http://en.wikipedia.org/wiki/Sequence_assembly 

https://genomebiology.biomedcentral.com/articles/10.1186/s13059-016-0951-y

Address of the bookmark: https://sourceforge.net/projects/operasf/

Again, running spades.py will show you the options:

spades.py

This produces:

SPAdes genome assembler v3.10.1

Usage: /usr/local/SPAdes-3.10.1-Linux/bin/spades.py [options] -o <output_dir>

Basic options:
-o      <output_dir>    directory to store all the resulting files (required)
--sc                    this flag is required for MDA (single-cell) data
--meta                  this flag is required for metagenomic sample data
--rna                   this flag is required for RNA-Seq data
--plasmid               runs plasmidSPAdes pipeline for plasmid detection
--iontorrent            this flag is required for IonTorrent data
--test                  runs SPAdes on toy dataset
-h/--help               prints this usage message
-v/--version            prints version

Input data:
--12    <filename>      file with interlaced forward and reverse paired-end reads
-1      <filename>      file with forward paired-end reads
-2      <filename>      file with reverse paired-end reads
-s      <filename>      file with unpaired reads
--pe<#>-12      <filename>      file with interlaced reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-1       <filename>      file with forward reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-2       <filename>      file with reverse reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-s       <filename>      file with unpaired reads for paired-end library number <#> (<#> = 1,2,..,9)
--pe<#>-<or>    orientation of reads for paired-end library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--s<#>          <filename>      file with unpaired reads for single reads library number <#> (<#> = 1,2,..,9)
--mp<#>-12      <filename>      file with interlaced reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-1       <filename>      file with forward reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-2       <filename>      file with reverse reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-s       <filename>      file with unpaired reads for mate-pair library number <#> (<#> = 1,2,..,9)
--mp<#>-<or>    orientation of reads for mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--hqmp<#>-12    <filename>      file with interlaced reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-1     <filename>      file with forward reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-2     <filename>      file with reverse reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-s     <filename>      file with unpaired reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9)
--hqmp<#>-<or>  orientation of reads for high-quality mate-pair library number <#> (<#> = 1,2,..,9; <or> = fr, rf, ff)
--nxmate<#>-1   <filename>      file with forward reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--nxmate<#>-2   <filename>      file with reverse reads for Lucigen NxMate library number <#> (<#> = 1,2,..,9)
--sanger        <filename>      file with Sanger reads
--pacbio        <filename>      file with PacBio reads
--nanopore      <filename>      file with Nanopore reads
--tslr  <filename>      file with TSLR-contigs
--trusted-contigs       <filename>      file with trusted contigs
--untrusted-contigs     <filename>      file with untrusted contigs

Pipeline options:
--only-error-correction runs only read error correction (without assembling)
--only-assembler        runs only assembling (without read error correction)
--careful               tries to reduce number of mismatches and short indels
--continue              continue run from the last available check-point
--restart-from  <cp>    restart run with updated options and from the specified check-point ('ec', 'as', 'k<int>', 'mc')
--disable-gzip-output   forces error correction not to compress the corrected reads
--disable-rr            disables repeat resolution stage of assembling

Advanced options:
--dataset       <filename>      file with dataset description in YAML format
-t/--threads    <int>           number of threads
                                [default: 16]
-m/--memory     <int>           RAM limit for SPAdes in Gb (terminates if exceeded)
                                [default: 250]
--tmp-dir       <dirname>       directory for temporary files
                                [default: <output_dir>/tmp]
-k              <int,int,...>   comma-separated list of k-mer sizes (must be odd and
                                less than 128) [default: 'auto']
--cov-cutoff    <float>         coverage cutoff value (a positive float number, or 'auto', or 'off') [default: 'off']
--phred-offset  <33 or 64>      PHRED quality offset in the input reads (33 or 64)
                                [default: auto-detect]

As you can see this is also a “pipeline” of tools that can be switched on or off. SPAdes takes quite a long time, so for the purposes of this practical, something like this may suffice:

spades.py -t 4 \
          -m 32 \
          -k 31,51,71 \
          --only-assembler \
          -1 miseq.1.fastq -2 miseq.2.fastq \
          --nanopore minion.fastq \
          -o hybrid_assembly

In turn, these parameters mean

• use 4 threads
• max memory is 32Gb
• use 3 kmer values to build the de bruijn graph(s) - 31, 51 and 71
• only run the assembler, not the correction algorithm (for speed)
• read 1 and read 2 of the MiSeq data
• the nanopore data
• put the output in folder “hybrid_assembly”

Address of the bookmark: ftp://ftp.genomics.org.cn/pub/cope

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume.  NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.