BOL: Related items

SvABA: Structural variation and indel detection by local assembly

Jit — Tue, 10 Mar 2020 07:52:15 -0500

SvABA is a method for detecting structural variants in sequencing data using genome-wide local assembly. Under the hood, SvABA uses a custom implementation of SGA (String Graph Assembler) by Jared Simpson, and BWA-MEM by Heng Li. Contigs are assembled for every 25kb window (with some small overlap) for every region in the genome. The default is to use only clipped, discordant, unmapped and indel reads, although this can be customized to any set of reads at the command line using VariantBam rules. These contigs are then immediately aligned to the reference with BWA-MEM and parsed to identify variants. Sequencing reads are then realigned to the contigs with BWA-MEM, and variants are scored by their read support.

Address of the bookmark: https://github.com/walaj/svaba

RefKA: A fast and efficient long-read genome assembly approach for large and complex genomes

Rahul Nayak — Fri, 01 May 2020 03:00:40 -0500

RefKA, a reference-based approach for long read genome assembly. This approach relies on breaking up a closely related reference genome into bins, aligning k-mers unique to each bin with PacBio reads, and then assembling each bin in parallel followed by a final bin-stitching step.

Address of the bookmark: https://github.com/AppliedBioinformatics/RefKA

VICUNA: a software tool that enables consensus assembly of ultra-deep sequence derived from diverse viral or other heterogeneous populations.

biogeek — Tue, 25 Aug 2020 03:40:17 -0500

VICUNA is a de novo assembly program targeting populations with high mutation rates. It creates a single linear representation of the mixed population on which intra-host variants can be mapped. For clinical samples rich in contamination (e.g., >95%), VICUNA can leverage existing genomes, if available, to assemble only target-alike reads. After initial assembly, it can also use existing genomes to perform guided merging of contigs. For each data set (e.g., Illumina paired read, 454), VICUNA outputs consensus sequence(s) and the corresponding multiple sequence alignment of constituent reads. VICUNA efficiently handles ultra-deep sequence data with tens of thousands fold coverage.

http://software.broadinstitute.org/viral/docs/vicuna_v1.0.pdf

Address of the bookmark: https://www.broadinstitute.org/viral-genomics/vicuna

GraphUnzip: Phases an assembly graph using Hi-C data and/or long reads.

Jit — Fri, 05 Feb 2021 21:22:24 -0600

GraphUnzip, a fast, memory-efficient and accurate tool to unzip assembly graphs into their constituent haplotypes using long reads and/or Hi-C data. As GraphUnzip only connects sequences in the assembly graph that already had a potential link based on overlaps, it yields high-quality gap-less supercontigs. To demonstrate the efficiency of GraphUnzip, we tested it on a simulated diploid Escherichia coli genome, and on two real datasets for the genomes of the rotifer Adineta vaga and the potato Solanum tuberosum. In all cases, GraphUnzip yielded highly continuous phased assemblies.

https://www.biorxiv.org/content/biorxiv/early/2021/02/01/2021.01.29.428779.full.pdf

Address of the bookmark: https://github.com/nadegeguiglielmoni/GraphUnzip

LoReTTA, a user-friendly tool for assembling viral genomes from PacBio sequence data

Neel — Wed, 23 Jun 2021 07:54:53 -0500

LoReTTA (Long Read Template-Targeted Assembler), a tool designed for performing de novo assembly of long reads generated from viral genomes on the PacBio platform. LoReTTA exploits a reference genome to guide the assembly process, an approach that has been successful with short reads.

https://academic.oup.com/ve/article/7/1/veab042/6248116

Address of the bookmark: https://academic.oup.com/ve/article/7/1/veab042/6248116

Spades tutorial PDF

Abhimanyu Singh — Tue, 01 Feb 2022 04:56:43 -0600

SPAdes—St. Petersburg genome Assembler—was originally developed for de novo assembly of genome sequencing data produced for cultivated microbial isolates and for single-cell genomic DNA sequencing. With time, the functionality of SPAdes was extended to enable assembly of IonTorrent data, as well as hybrid assembly from short and long reads (PacBio and Oxford Nanopore). In this article we present protocols for five different assembly pipelines that comprise the SPAdes package and that are used for assembly of metagenomes and transcriptomes as well as assembly of putative plasmids and biosynthetic gene clusters from whole-genome sequencing and metagenomic datasets.

Bioinformatics tools for genome assembly !

BioStar — Mon, 24 Jul 2023 07:04:26 -0500

There are numerous genome assembly tools available, each with its strengths and weaknesses. Here is a list of some widely used genome assembly tools as of my last update in September 2021:

SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.
ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.
Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.
SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.
MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.
Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.
Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.
SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.
SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.
Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.
Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.
wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.
Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.
Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.
CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.
Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

quarTeT: a telomere-to-telomere toolkit for gap-free genome assembly and centromeric repeat identification.

Abhi — Sat, 08 Jun 2024 15:54:36 -0500

quarTeT is a collection of tools for T2T genome assembly and basic analysis in automatic workflow.

Task include:

AssemblyMapper : reference-guided genome assembly
GapFiller : long-reads based gap filling
TeloExplorer : telomere identification
CentroMiner : centromere candidate prediction

https://academic.oup.com/hr/article/10/8/uhad127/7197191?login=false

Address of the bookmark: http://www.atcgn.com:8080/quarTeT/home.html

The Genome 10K Project

Tue, 29 Jul 2014 09:11:04 -0500

https://genome10k.soe.ucsc.edu The Genome 10K project aims to assemble a genomic zoo—a collection of DNA sequences representing the genomes of 10,000 vertebrate species, approximately one for every vertebrate genus. The trajectory of cost reduction in DNA sequencing suggests that this project will be feasible within a few years. Capturing the genetic diversity of vertebrate species would create an unprecedented resource for the life sciences and for worldwide conservation efforts. The growing Genome 10K Community of Scientists (G10KCOS), made up of leading scientists representing major zoos, museums, research centers, and universities around the world, is dedicated to coordinating efforts in tissue specimen collection that will lay the groundwork for a large-scale sequencing and analysis project.

liftover

Jitendra Narayan — Mon, 08 Feb 2016 15:45:03 -0600

Convenient conversions between genome assemblie. The liftover package makes it easy to remap genomic coordinates to a different genome assembly.

More at https://github.com/aaronwolen/liftover

https://www.bioconductor.org/help/workflows/liftOver/

Address of the bookmark: https://github.com/aaronwolen/liftover