BOL: Related items

Common methods to discover tandem repeats

BioStar — Thu, 09 Mar 2023 02:40:52 -0600

Tandem repeats are DNA sequences that are repeated in a contiguous manner in the genome. These sequences are often used as genetic markers and are important in many areas of genetics and genomics research. Here are some methods for discovering tandem repeats in genomes:

Tandem Repeat Finder: Tandem Repeat Finder is a software tool that identifies tandem repeats in DNA sequences. It is available for free download and can be used on both nucleotide and protein sequences. The tool uses a statistical algorithm to identify repeats based on their length, copy number, and overall composition.
RepeatMasker: RepeatMasker is another software tool that can identify tandem repeats in DNA sequences. It works by comparing the input sequence to a database of known repeats and then identifies any tandem repeats that match those in the database.
PCR-based methods: Polymerase chain reaction (PCR) can be used to amplify and detect tandem repeats in genomic DNA. PCR primers are designed to flank the tandem repeat region, and amplification of the target DNA fragment can be visualized on a gel. This method can be useful for detecting novel tandem repeats and for genotyping.
Southern blotting: Southern blotting is a classic method for detecting DNA fragments in a sample. It can be used to detect tandem repeats by digesting genomic DNA with a restriction enzyme, separating the fragments by gel electrophoresis, and then probing the blot with a tandem repeat-specific probe.

Overall, a combination of these methods can be used to comprehensively identify tandem repeats in genomes.

RA at IISR Kozhikode

Thu, 15 May 2014 10:08:09 -0500

INDIAN INSTITUTE OF SPICES RESEARCH
(Indian Council of Agricultural Research)
Marikunnu P.O., Kozhikode – 673 012, Kerala

Walk- in- Test cum Interview (based on test) for the selection of Research Associate

under the scheme “Distributed Information Sub Centre –DISC” & Research Assistant under scheme “Phytophthora, Fusarium and Ralstonia diseases of Horticultural and Field Crops” will be held at this Institute as per details indicated below.

WALK -IN- TEST CUM INTERVIEW

Name of the post : Research Associate

Date of Interview : 21-05-2014 at 10.00 AM

No. of posts : One

Qualifications : a)Essential

Ph.D Degree in Bioinformatics OR : Masters degree in Bioinformatics with a minimum of
60% marks or equivalent OGPA with at least two years research experience as evidenced from fellowship/ associateship/training/published papers etc.

b)Desirable: Experience in NGS data analysis.

Emoluments : Rs. 23,000/- per month + HRA (Masters Degree Holders)

Rs. 24,000/- per month + HRA (Ph.D Degree Holders)

Upper age limit : 40 years for Men & 45 years for Women as on date of Interview (Upper Age limits are relaxable for SC, ST and OBC candidates as per Govt. of India norms (at present 5 years for SC/ST and 3 years for OBC)

Duration of Project : Till 31-03-2017.

Title of Assigment : Research Assistant (on contract basis)

No. of vacancy : One

Qualification : Essential : Post Graduation in Bioinformatics and Minimum one year experience in NGS data analysis

Desirable : Experience in Perl/Python/R

Remuneration : Rs. 20,000/- per month (consolidated)

Scope of work :

1. Analysis of different file formats and their conversions.

2. Assessing the quality of data and filtering of raw reads.
3. Assembling the raw reads-de novo as well as reference mapping.
4. Compression of aligned reads using Jam tools
5. RNA-seq. Analysis
6. Differential expression testing involving Normalization, Statistical testing, heat map generation & hierarchical clustering
7. Annotating the assembled genome and geneet testing and their validation
8. Metabolic pathway analysis
9. Comparative genomics
10. Setting up of genome browsers.

Period of Assigment : Initially for six months.

Date & Venue of Interview : 21-05-2014 at IISR, Kozhikode at 10.00 AM

More at http://www.spices.res.in/pdf/disc-advtmnt.pdf

Professor/Associate Professor/ Assistant Professor at Chettinad Academy of Research and Education

Sat, 24 May 2014 00:00:15 -0500

OPEN FACULTY POSITION

Chettinad Academy of Research and Education (CARE) invites applications from eligible and translational research-oriented candidates to the posts of Professor/Associate Professor/ Assistant Professor Computational Biology, Bioinformatics, and Pharmaceutical Chemistry.

Emoluments: As per UGC norms (Adequate Compensation for Postdoctoral/Teaching experience)

Candidates fulfilling the eligibility criteria as per the UGC norms can send their full CV with copies of certificates and reference letters to the following address by post or by e-mail on or before 31st May 2014

The Registrar,
Chettinad Academy of Research and Education,
Chettinad Health City
Kelambakkam, Chennai 603 103
Tamil Nadu
T +91 (0)44 4741 1000
F +91 (0)44 4741 1011
Email: jobs @chettinadhealthcity.com

Advertisement: http://182.73.176.163/chc/ads2014.pdf

Online resources on must-read papers in evolutionary biology, for a literature club

Shruti Paniwala — Tue, 28 Jun 2022 07:29:08 -0500

1.       *Nick Barton:*

- The textbook "Evolution" by Nick Barton, with resources for
  exploring the literature: Barton, N. H., Briggs, D. E. G., Eisen, J.
  A., Goldstein, D. B., & Patel, N. H. (2007). Evolution. Cold Spring
  Harbor Laboratory Press.

- Papers from a course named "Classics in Evolutionary Biology":

Evolutionary Synthesis
1. Haldane, J. B. S. 1932. The causes of evolution. Longmans. New York.
   (esp. Ch. IV).
2. Fisher, R. A. 1930. The genetical theory of natural selection. Oxford
   University Press, Oxford. Selected Sections - Fundamental Theorem.

Genetic Variation
1a. Lewontin, R. C., and J. L. Hubby. 1966. A molecular approach to
the study of genic heterozygosity in natural populations. II. Amount
of variation and degree of heterozygosity in natural populations of
Drosophila pseudoobscura. Genetics. 54:595-609.

1b. Sachidandam et al. 2001. A map of human genome sequence variation
containing 1.42 million single nucleotide polymorphisms. 409: 928-33.

2. Wright S., Dobzhansky T., Hovanitz W. 1942 Genetics of natural
populations VII The allelism of lethals in the third chromosome of
Drosophila pseudoobscura. Genetics 27: 363-394.

Recombination and evolution
1. Hill, W. G., and A. Robertson. 1966. The effect of linkage on limits
to artificial selection. Genet. Res. 8:269-294.

2. Maynard Smith and Haigh. 1974. The hitch-hiking effect of a favourable
gene. Genet. Res. 23: 23-35.

Understanding sequence variation
1. Begun D. J., Aquadro C. F., 1992 Levels of naturally occurring DNA
polymorphism correlate with recombination rate in Drosophila melanogaster.
Nature 356: 519-520.

2. Green R. E., Reich D., Pääbo S., 2010 A draft sequence of the
Neandertal genome. Science 328: 710-722.

Quantitative Genetics:  variation in complex traits
1. Galton F., 1877 Typical laws of heredity. Nature 15: 492-495-
512-514- 532-533.

2. Turelli M., 1984 Heritable genetic variation via
mutation-selection balance: Lerch's Zeta meets the abdominal
bristle. Theor. Popul. Biol. 25: 138-193.

Quantitative Genetics:  finding the genes
1. Shrimpton A. E., Robertson A., 1988 The Isolation of polygenic factors
controlling bristle score in Drosophila melanogaster II Distribution of
third chromosome bristle effects within chromosome sections. Genetics
118: 445-459.

2. Boyle E. A., Li Y. I., Pritchard J. K., 2017 An expanded view of
complex traits: from polygenic to omnigenic. Cell 169: 1177-1186.

Neutral Evolution
1. Kimura, M. 1968. Evolutionary rate at the molecular level. Science.
217:624-626.

2a. Kern A. D., Hahn M. W., 2018 The Neutral Theory in Light of Natural
Selection. Molecular Biology and Evolution 110: 21077-6.

2b. Jensen J. D., Payseur B. A., Stephan W., Aquadro C. F., Lynch M.,
Charlesworth D., Charlesworth B., 2018 The importance of the Neutral Theory
in 1968 and 50 years on: a response to Kern and Hahn 2018. Evolution 112:
2109-4.

2c. Ellegren & Galtier. 2016. Determinants of genetic diversity. Nature
Reviews Genetics.

Mutation and Genetic Variability
1. Luria, S. E., and M. Delbrück. 1943. Mutations of Bacteria from Virus
Sensitivity to Virus Resistance. Genetics. 28(6):491-511.

2. Hill, W G. 1982. "Rates of Change in Quantitative Traits From Fixation
of New Mutations." Proceedings of the National Academy of Sciences (U.S.A.)
79: 142-45.

Testing for selection
1. McDonald & Kreitman. 1991. Adaptive protein evolution at the Adh locus
in Drosophila. Nature.

2. Begun, et al. Mol. Biol. Evol. 16, 1816-1819 (1999).

3. Siddiq et al. 2016. Experimental test and refutation of a classic case
of molecular adaptation in Drosophila melanogaster.  Nature Ecology &
Evolution.

The shifting balance
1. Wright, S. 1932. The roles of mutation, inbreeding, crossbreeding and
selection in evolution. Proceedings of the VI International Congress of
Genetics: 1. pp 356-366.

2. Coyne, J.A., N.H. Barton, and M. Turelli. 1997. A critique of Wright's
shifting balance theory of evolution.  Evolution 51: 643-671.

3. Barton. 2016. Sewall Wright on Evolution in Mendelian Populations and
the "Shifting Balance". Genetics.

Evolution of Sex
1.  Muller, H.J. 1964. The relation of recombination to mutational advance.
Mutation Res. 1(1):2-9

2. McDonald et al. 2016. Sex speeds adaptation by altering the dynamics of
molecular evolution. Nature.

Kin Selection, Cooperation, and Conflict
1. Hamilton, W. D. 1964. The genetical evolution of social behaviour I.
Journal of Theoretical Biology. 7:1-52.

2. Trivers, R. L. 1974 Parent-offspring conflict. American Zoologist.
14(1):249-264.

Sexual Selection
1. Zahavi, A. 1975. Mate selection - a selection of a handicap. J. Theor.
Biol. 53:205-214.

2. Kirkpatrick, M., and Ryan, M.J. 1991. The evolution of mating
preferences and the paradox of the lek. Nature. 350:33-38.

Fitness Landscapes
1. Dean, A. 1995. A Molecular Investigation of Genotype by Environment
Interactions. Genetics. 139:19-33.

2. Costanzo et al. 2010. The Genetic Landscape of a Cell. Science.

Speciation
1. Coyne, J. A., and H. A. Orr. 1989. Patterns of speciation in Drosophila.
Evolution. 43:362-381.

2. Corbett-Detig et al. 2013. Genetic incompatibilities are widespread
within species. Nature.

2.       *Marcos Antezana:*

Valen, L. v. 1975. Energy and Evolution. University of Chicago, Department
of Biology.

3.       *Remco Folkertsma:*

1. The work by Hopi Hoekstra on local adaptation and oldfield mice

2. Poelstra, J. W., Vijay, N., Bossu, C. M., Lantz, H., Ryll, B., Müller,
I., ... & Wolf, J. B. (2014). The genomic landscape underlying phenotypic
integrity in the face of gene flow in crows. Science, 344(6190), 1410-1414.

4.       *Joshka Kaufmann and Leslie Turner*

They offer us a link to 'papers every evolutionary biologist should read',
the papers are collected by Leslie Turner.
https://static1.squarespace.com/static/53e8cb7ce4b02c4bc3aeeee4/t/5ab8fcb670a6ad55c67fcdf4/1522072758665/EvoBioClassicsRefList.pdf

5.       *Sarah Stockwell*

Matt Ridley collected classic papers in evolutionary biology and printed
part of these papers in his book Evolution (see Matt Ridley. Evolution
(Univ. of Oxford Press, 2nd edition, 2004))

The Minerva Research Group for Bioinformatics

Tue, 27 May 2014 15:48:14 -0500

The focus of the bioinformatics group is to use computational approaches to gain an insight into genome evolution in primates.

http://www.eva.mpg.de/genetics/bioinformatics/overview.html?Fsize=0%2C%20%40%2F%27

Kelso Group
Department of Evolutionary Genetics
Max Planck Institute for Evolutionary Anthropology
Deutscher Platz 6
04103 Leipzig
Germany
Phone: +49 341 3550 500

Job:
http://www.eva.mpg.de/genetics/bioinformatics/jobs.html?Fsize=0%2C%2B%40

Tools for bacterial whole genome annotation

Radha Agarkar — Sat, 16 Dec 2017 17:37:47 -0600

RAST – Web tool (upload contigs), uses the subsystems in the SEED database and provides detailed annotation and pathway analysis. Takes several hours per genome but I think this is the best way to get a high quality annotation (if you have only a few genomes to annotate).

Prokka – Standalone command line tool, takes just a few minutes per genome. This is the best way to get good quality annotation in a flash, which is particularly useful if you have loads of genomes or need to annotate a pangenome or metagenome. Note however that the quality of functional information is not as good as RAST, and you will need several extra steps if you want to do functional profiling and pathway analysis of your genome(s)… which is in-built in RAST.

NCBI Prokaryotic Genome Annotation Pipeline is designed to annotate bacterial and archaeal genomes (chromosomes and plasmids).

Genome annotation is a multi-level process that includes prediction of protein-coding genes, as well as other functional genome units such as structural RNAs, tRNAs, small RNAs, pseudogenes, control regions, direct and inverted repeats, insertion sequences, transposons and other mobile elements.

PGAP: NCBI has developed an automatic prokaryotic genome annotation pipeline that combines ab initio gene prediction algorithms with homology based methods. The first version of NCBI Prokaryotic Genome Automatic Annotation Pipeline (PGAAP; see Pubmed Article) developed in 2005 has been replaced with an upgraded version that is capable of processing a larger data volume. NCBI's annotation pipeline depends on several internal databases and is not currently available for download or use outside of the NCBI environment.

BEACON (automated tool for Bacterial GEnome Annotation ComparisON), a fast tool for an automated and a systematic comparison of different annotations of single genomes. The extended annotation assigns putative functions to many genes with unknown functions. BEACON is available under GNU General Public License version 3.0 and is accessible at: http://www.cbrc.kaust.edu.sa/BEACON/.

BlastKOLA: Assigns K numbers to the user's sequence data by BLAST searches, respectively, against a nonredundant set of KEGG GENES. KOALA (KEGG Orthology And Links Annotation) is KEGG's internal annotation tool for K number assignment of KEGG GENES using SSEARCH computation. Annotate Sequence in KEGG Mapper and Pathogen Checker in KEGG Pathogen are special interfaces to this server and can be executed in an interactive mode. BlastKOALA is suitable for annotating fully sequenced genomes.

PAGIT: Provides a toolkit for improving the quality of genome assemblies created via an assembly software. PAGIT compiled four tools: (i) ABACAS which classifies and orientates contigs and estimates the sizes of gaps between them; (ii) IMAGE uses paired-end reads to extend contigs and close gaps within the scaffolds; (iii) ICORN for identifying and correcting small errors in consensus sequences and; (iv) RATT for help annotation. The software was mainly created to analyze parasite genomes of up to about 300 Mb.

MAKER: A portable and easily configurable genome annotation pipeline. MAKER allows smaller eukaryotic and prokaryotic genome projects to independently annotate their genomes and to create genome databases. It identifies repeats, aligns ESTs and proteins to a genome, produces ab-initio gene predictions and automatically synthesizes these data into gene annotations having evidence-based quality values. MAKER's inputs are minimal and its ouputs can be directly loaded into a Generic Model Organism Database (GMOD). They can also be viewed in the Apollo genome browser; this feature of MAKER provides an easy means to annotate, view and edit individual contigs and BACs without the overhead of a database. MAKER is available for download and can be tested online via the MAKER Web Annotation Service (MWAS).

MyPro is a software pipeline for high-quality prokaryotic genome assembly and annotation. It was validated on 18 oral streptococcal strains to produce submission-ready, annotated draft genomes. MyPro installed as a virtual machine and supported by updated databases will enable biologists to perform quality prokaryotic genome assembly and annotation with ease.

Monitor running jobs on Linux server

Jitendra Narayan — Fri, 06 Jun 2014 16:18:43 -0500

You as a bioinformatican run lots of program on your servers. Sometime the shared server is also used by your colleague. If server is busy you sometime need to check the running programs and want to monitor the running programs as well. The "top" command will come in handy when you need to find out if things are still running, how long they’ve been running, or how much memory is being used.

‘top’ is very simple to run: type

%% top

You’ll get a screen that looks like this, and is updated regularly:

Simple, right? Heh.

First! Note that you can use ‘q’ or ‘CTRL-C’ to exit from ‘top’.

Now let’s read and understand at each line independently.

The first line:

top - 23:00:48 up 39 days, 2 user, load average: 0.00, 0.00, 0.00

The first line tells you the current time, how long the machine has been up, how many users are logged in, and the short/medium/long-term compute load on the machine. If you run something for a long time, you’ll see these numbers go up. Right now, the machine is basically just sitting there, so these are all close to 0.

The second line:

Tasks: 239 total,   1 running, 238 sleeping,   0 stopped,   0 zombie

This line tells you how many processes are running. If you are using laptops machines it’s not so interesting because you really are the only one using this machine.

Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st

This line contains the CPU load. The first two numbers are how busy the system is doing computation (“us” stands for “user”) and how busy the system is doing system-y things like accessing disks or network (“sy” stands for “system”). We’ll talk more about this later.

Mem:   49457320k total,    3492174k used, 14535596k free,    1435148k buffers

This should be easy to understand – how much memory you’re using!

Swap:   539356k total,   28332k used,   836562k free,    29862014k cached

Swap is just on-disk memory that can be used to “swap” out programs from main memory. Again, we’ll talk about this later.:

PID USER      PR NI VIRT RES SHR S %CPU %MEM    TIME+ COMMAND
1 root      39 19 0 0 0 S 0.0 0.0   246:57.22 kipmi0
2 root      RT   0     0    0    0 S 0.0 0.0   0:00.00 migration/0

And... finally! What’s actually running! The two most important numbers are the %CPU and %MEM towards the right, as well as the COMMAND. This tells you how compute- and memory-intensive your program is. Right now, nothing’s running so the numbers aren’t very interesting, but just wait until we run something...

Protein-Protein Interaction Sites Predictions !

Poonam Mahapatra — Wed, 25 Apr 2018 04:53:20 -0500

The study of Protein–Protein Interactions (PPIs) has a crucial role in biology, medicine and the pharmaceutical industry. PPIs can be investigated from two aspects: The interaction partners of a specific protein and the amino acid residues participating in a given PPI. Information about a protein’s interaction partners allows scientists to construct protein interaction networks, such as signaling pathways, which in turn facilitate the understanding of many biological and clinical observations.

Following are the list of tools commonly used to PPIs predictions:

Protein-Protein Interaction Sites

PPISP

A consensus neural network method for predicting protein-protein interaction sites

HOMCOS

A server to predict interacting protein pairs and interacting sites by homology modeling of complex structures

HotPOINT

Prediction of protein interfaces using an empirical model

ISIS

Prediction of interaction hotspots from sequence

KFC server

Automated decision-tree approach to predicting protein-protein interaction hot spots

meta-PPISP

A meta server for predicting protein-protein interaction sites. meta-PPISP is built on three individual web servers: cons-PPISP, PINUP, and Promate

ODA

Identification of optimal surface patches with the lowest docking desolvation energy values

PINUP

Protein binding site prediction with an empirical scoring function

Other Sites (DNA, RNA, Metals)

CHED

Web server for predicting soft metal binding sites in proteins

DBD-Hunter

A knowledge-based method for the prediction of DNA-protein interactions

DISPLAR

Given the structure of a protein known to bind DNA, the method predicts residues that contact DNA using neural network method

iDBPs

Predicts DNA binding proteins for proteins with known 3D structure.

PFplus

A tool for extracting and displaying positive electrostatic patches on protein surfaces which can be indicative of nucleic acid binding interfaces.

Genomics and Personalized Medicine Breakthroughs

Sun, 01 Jun 2014 23:40:14 -0500

http://bit.ly/e8QGzY Human genome mapping is now enabling a breakthrough in medical innovation -- personalized medicine. What does this mean for patients? We can now identify predispositions to disease, predict how we metabolize drugs, and figure out what kinds of treatments we may respond to, and even determine when a drug may give us an adverse reaction. All medical specialties benefit from human genome intelligence -- oncology saw the first impacts -- but advances are now being seen in cardiology, obstetrics and gynecology, pediatric diseases, gastroenterology, rheumatology, immunology and other areas. This video covers the areas that genetic medicine is impacting and where the future of genomic medicine is heading.

MITObim - mitochondrial baiting and iterative mapping

Rahul Nayak — Tue, 08 May 2018 04:15:25 -0500

This document contains instructions on how to use the MITObim pipeline described in Hahn et al. 2013. The full article can be found here. Kindly cite the article if you are using MITObim in your work. The pipeline was originally developed for Illumina data, but thanks to the versatility of the MIRA assembler, MITObim supports in principle also data from the Iontorrent, 454 and PacBio sequencing platforms.

Below you can find a few basic tutorials for how to run MITObim and I encorage you to give them a try with the testdata that comes with this Repo, just to make sure everything is running smoothly on your system. It'll only take a few minutes and will potentially safe you a lot of time down the line.

I provide further examples here as Jupyter notebooks. Get in touch if you feel like sharing your particular MITObim solution and I'd be happy to put it up here, too!

Address of the bookmark: https://github.com/chrishah/MITObim