For example ... contig-stats.pl is a Perl script that will automatically describe features of a sequence assembly.

http://milkweedgenome.org/?q=scripts

Address of the bookmark: http://milkweedgenome.org/?q=scripts

The primary home page for DendroPy, with detailed tutorials and documentation, is at:

http://dendropy.org/

DendroPy is also hosted in the official Python repository:

http://packages.python.org/DendroPy/

Address of the bookmark: https://pypi.org/project/DendroPy/

The easiest way to install Gooey is via pip

pip install Gooey 

Alternatively, you can install Gooey by cloning the project to your local directory

git clone https://github.com/chriskiehl/Gooey.git

run setup.py

python setup.py install

Address of the bookmark: https://github.com/chriskiehl/Gooey

Requirements
Doctoral degree in Bioinformatics, Computational Biology, (Bio)physics/-mathematics, Biochemistry/Biology or similar with strong quantitative and numeric focus
Ability to numerically process complex and large data sets
Good programming skills (R/Bioconductor and/or Python preferred, Linux is a plus)
Experience in analyzing next-generation sequencing data sets using network biology
Scientific publication record in applied bioinformatics
Familiarity with single cell NGS analyses and other –omics techniques is a plus, but not essential

Run pip install luigi to install the latest stable version from PyPI. Documentation for the latest release is hosted on readthedocs.

Run pip install luigi[toml] to install Luigi with TOML-based configs support.

Address of the bookmark: https://github.com/spotify/luigi

Use the Terminal or an Anaconda Prompt for the following steps.

1. To create an environment:

   conda create --name myenv
   

   NOTE: Replace myenv with the environment name.

2. When conda asks you to proceed, type y:

   proceed ([y]/n)?
   

This creates the myenv environment in /envs/. This environment uses the same version of Python that you are currently using, because you did not specify a version.

To create an environment with a specific version of Python:

conda create -n myenv python=3.4

To create an environment with a specific package:

conda create -n myenv scipy

OR:

conda create -n myenv python
conda install -n myenv scipy

To create an environment with a specific version of a package:

conda create -n myenv scipy=0.15.0

OR:

conda create -n myenv python
conda install -n myenv scipy=0.15.0

To create an environment with a specific version of Python and multiple packages:

conda create -n myenv python=3.4 scipy=0.15.0 astroid babel

TIP: Install all the programs that you want in this environment at the same time. Installing 1 program at a time can lead to dependency conflicts.

To automatically install pip or another program every time a new environment is created, add the default programs to the create_default_packages section of your .condarc configuration file. The default packages are installed every time you create a new environment. If you do not want the default packages installed in a particular environment, use the --no-default-packages flag:

conda create --no-default-packages -n myenv python

TIP: You can add much more to the conda create command. For details, run conda create --help.

➜ redundans git:(master) ✗ conda create --name py27 python=2.7
Solving environment: done

==> WARNING: A newer version of conda exists. <==
current version: 4.5.0
latest version: 4.5.2

Please update conda by running

$ conda update -n base conda

## Package Plan ##

environment location: /home/urbe/anaconda3/envs/py27

added / updated specs:
- python=2.7

The following packages will be downloaded:

package | build
---------------------------|-----------------
wheel-0.31.0 | py27_0 61 KB
python-2.7.15 | h1571d57_0 12.1 MB
certifi-2018.4.16 | py27_0 142 KB
sqlite-3.23.1 | he433501_0 1.5 MB
setuptools-39.1.0 | py27_0 582 KB
openssl-1.0.2o | h20670df_0 3.4 MB
pip-10.0.1 | py27_0 1.7 MB
ca-certificates-2018.03.07 | 0 124 KB
------------------------------------------------------------
Total: 19.6 MB

The following NEW packages will be INSTALLED:

ca-certificates: 2018.03.07-0
certifi: 2018.4.16-py27_0
libedit: 3.1-heed3624_0
libffi: 3.2.1-hd88cf55_4
libgcc-ng: 7.2.0-hdf63c60_3
libstdcxx-ng: 7.2.0-hdf63c60_3
ncurses: 6.0-h9df7e31_2
openssl: 1.0.2o-h20670df_0
pip: 10.0.1-py27_0
python: 2.7.15-h1571d57_0
readline: 7.0-ha6073c6_4
setuptools: 39.1.0-py27_0
sqlite: 3.23.1-he433501_0
tk: 8.6.7-hc745277_3
wheel: 0.31.0-py27_0
zlib: 1.2.11-ha838bed_2

Proceed ([y]/n)? y

Downloading and Extracting Packages
wheel 0.31.0: #################################################################################################################################################################################################### | 100%
python 2.7.15: ################################################################################################################################################################################################### | 100%
certifi 2018.4.16: ############################################################################################################################################################################################### | 100%
sqlite 3.23.1: ################################################################################################################################################################################################### | 100%
setuptools 39.1.0: ############################################################################################################################################################################################### | 100%
openssl 1.0.2o: ################################################################################################################################################################################################## | 100%
pip 10.0.1: ###################################################################################################################################################################################################### | 100%
ca-certificates 2018.03.07: ###################################################################################################################################################################################### | 100%
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use:
# > source activate py27
#
# To deactivate an active environment, use:
# > source deactivate
#

➜ redundans git:(master) ✗ source activate py27

To install the stable version: pip3 install --user tinycov

To install the development version:

git clone https://github.com/cmdoret/tinycov.git
cd tinycov
pip install .

Address of the bookmark: https://github.com/cmdoret/tinycov

Address of the bookmark: http://www.programmingr.com/category/stype/r-job-listings/

The only input requierement for UPhO is a tree (or trees) in Newick format in which the leaves are named with a species idenfifier, a field separator, and sequence identifier. By default, the field separator is the character "|" but custom delimiters can be defined. Examples of trees to test UPhO are provided in the TestData folder.

Address of the bookmark: https://github.com/ballesterus/UPhO

• -e Makes the line of code be executed instead of a script
• -n Forces your line to be called in a loop. Allows you to take lines from the diamond operator (or stdin)
• -p Forces your line to be called in a loop. Prints $_ at the end

• This counts the number of quotation marks in each line and prints it

  perl -ne '$cnt = tr/"//;print "$cnt\n"' inputFileName.txt

• Adds string to each line, followed by tab

  perl -pe 's/(.*)/string\t$1/' inFile > outFile

• Append a new line to each line

  perl -pe 's//\n/' all.sent.classOnly > all.sent.classOnly.sep

• Replace all occurrences of pattern1 (e.g. [0-9]) with pattern2

  perl -p -i.bak -w -e 's/pattern1/pattern2/g' inputFile

• Go through file and only print words that do not have any uppercase letters.

  perl -ne 'print unless m/[A-Z]/' allWords.txt > allWordsOnlyLowercase.txt

• Go through file, split line at each space and print words one per line.

  perl -ne 'print join("\n", split(/ /,$_));print("\n")' someText.txt > wordsPerLine.txt

• or in other words, delete every character that is not a letter, white space or line end (replace with nothing)

  perl -pne 's/[^a-zA-Z\s]*//g' text_withSpecial.txt > text_lettersOnly.txt

• perl -pne 'tr/[A-Z]/[a-z]/' textWithUpperCase.txt > textwithoutuppercase.txt;

• Print only the second column of the data when using tabular as a separator

  perl -ne '@F = split("\t", $_); print "$F[1]";' columnFileWithTabs.txt > justSecondColumn.txt

• One-Liner: Sort lines by their length

  perl -e 'print sort {length $a <=> length $b} <>' textFile

• One-Liner: Print second column, unless it contains a number

  perl">perl -lane 'print $F[1] unless $F[1] =~ m/[0-9]/' wordCounts.txt