BOL: Related items

Rajiv Gandhi Centre for Biotechnology (RGCB) invites applications for the following three faculty scientist

Tue, 24 Nov 2015 22:13:16 -0600

Scientist Positions
Advt. No.RGCB Advt./SCI 2015/1

November 11, 2015

Rajiv Gandhi Centre for Biotechnology (RGCB) invites applications for the following three faculty scientist positions:

Scientist E-II or F in Bioinformatics & Computational Biology

SCIENTIST E-II OR F IN COMPUTATIONAL BIOLOGY & BIOINFORMATICS

Highly motivated and innovative individual who will pursue basic research, solve biological problems with emphasis on computational and quantitative experimental methods and build active bridges to translational research. The scientist will also provide computational biology support to ongoing research programs in disease biology, provide assistance to analyze complex data sets generated by RGCB scientists and collaborators inclusive of including high dimensional “omics” data and next generation sequencing data, such as whole genome, exome, RNA-seq and ChIP-seq as well as provide leadership for high quality training for junior scientists and regular teaching programs of the institute. Areas of research of interest to RGCB include but are not limited to computational, systems, or quantitative biology with applications to cell biology, developmental biology, metabolism, genomics, proteomics, biophysics, biological information systems, network pharmacology, drug design and cancer research. The scientist’s responsibilities include efforts for the integration of DNA variant annotation with statistical genetic analysis methods including linkage, imputation and association methods, adopting novel and innovative methodologies to analyze, integrate and interpret high dimensional data sets, provision of annotation to robust genetics and genomics findings using several data sources and methods, data management of exploratory clinical and R&D studies in partnership with other lines of genetic data generated from internal and external studies, delivery and documentation of genomic information to support genetic studies, ensuring high-quality genetic and genomic data is incorporated into exploratory- clinical research programs, developing tools that make maximum use of multiple data sources to support annotation of DNA variation and contributes to systems biology initiatives within RGCB

More at http://rgcb.res.in/scientist-positions/

Application Form http://rgcb.res.in/wp-content/uploads/2015/11/APPLICATION-FORMAT-FOR-SCIENTISTS.docx

Alignment of closely related whole genomes/scaffolds

Rahul Nayak — Fri, 29 Jan 2016 10:37:27 -0600

With the relative ease and low cost of current generation sequencing technologies has led to a dramatic increase in the number of sequenced genomes for species across the tree of life. This increasing volume of data requires tools that can quickly compare multiple whole-genome sequences, millions of base pairs in length, to aid in the study of populations, pan-genomes, and genome evolution.This bookmaks have been created to report new tools for whole genome alignments.

Please report new whole genome alignment tools under comment sections.

Address of the bookmark: http://www.cs.utoronto.ca/~brudno/721.full.pdf

n50PlottingTools

Jit — Mon, 08 Feb 2016 15:39:04 -0600

Tools to create plots showing N-statistics for genome assemblies

More at https://github.com/dentearl/n50PlottingTools

Address of the bookmark: https://github.com/dentearl/n50PlottingTools

RNA-Seq De novo Assembly Using Trinity

Surabhi Chaudhary — Wed, 23 Mar 2016 05:53:46 -0500

Trinity, developed at the Broad Institute and the Hebrew University of Jerusalem, represents a novel method for the efficient and robust de novo reconstruction of transcriptomes from RNA-seq data. Trinity combines three independent software modules: Inchworm, Chrysalis, and Butterfly, applied sequentially to process large volumes of RNA-seq reads. Trinity partitions the sequence data into many individual de Bruijn graphs, each representing the transcriptional complexity at at a given gene or locus, and then processes each graph independently to extract full-length splicing isoforms and to tease apart transcripts derived from paralogous genes. Briefly, the process works like so:

Inchworm assembles the RNA-seq data into the unique sequences of transcripts, often generating full-length transcripts for a dominant isoform, but then reports just the unique portions of alternatively spliced transcripts.
Chrysalis clusters the Inchworm contigs into clusters and constructs complete de Bruijn graphs for each cluster. Each cluster represents the full transcriptonal complexity for a given gene (or sets of genes that share sequences in common). Chrysalis then partitions the full read set among these disjoint graphs.
Butterfly then processes the individual graphs in parallel, tracing the paths that reads and pairs of reads take within the graph, ultimately reporting full-length transcripts for alternatively spliced isoforms, and teasing apart transcripts that corresponds to paralogous genes.

More at https://github.com/trinityrnaseq/trinityrnaseq/wiki

......................................................................................................................................

Download Trinity here.

Build Trinity by typing 'make' in the base installation directory.

Assemble RNA-Seq data like so:

 Trinity --seqType fq --left reads_1.fq --right reads_2.fq --CPU 6 --max_memory 20G

Find assembled transcripts as: 'trinity_out_dir/Trinity.fasta'

Address of the bookmark: https://github.com/trinityrnaseq/trinityrnaseq/wiki

Sequence assembly with MIRA 4

Priya Singh — Wed, 06 Apr 2016 08:21:22 -0500

MIRA is a multi-pass DNA sequence data assembler/mapper for whole genome and EST/RNASeq projects. MIRA assembles/maps reads gained by

electrophoresis sequencing (aka Sanger sequencing)
454 pyro-sequencing (GS20, FLX or Titanium)
Ion Torrent
Solexa (Illumina) sequencing
(in development) Pacific Biosciences sequencing

into contiguous sequences (called contigs). One can use the sequences of different sequencing technologies either in a single assembly run (a true hybrid assembly) or by mapping one type of data to an assembly of other sequencing type (a semi-hybrid assembly (or mapping)) or by mapping a data against consensus sequences of other assemblies (a simple mapping).

The MIRA acronym stands for Mimicking Intelligent Read Assembly and the program pretty well does what its acronym says (well, most of the time anyway). It is the Swiss army knife of sequence assembly that I've used and developed during the past 14 years to get assembly jobs I work on done efficiently - and especially accurately. That is, without me actually putting too much manual work into it.

More at http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Address of the bookmark: http://mira-assembler.sourceforge.net/docs/DefinitiveGuideToMIRA.html

Smash: An alignment-free method to find and visualise rearrangements between pairs of DNA sequences

Jit — Tue, 26 Apr 2016 12:18:49 -0500

Smash is a completely alignment-free method/tool to find and visualise genomic rearrangements. The detection is based on conditional exclusive compression, namely using a FCM (Markov model), of high context order (typically 20). For visualisation, Smash outputs a SVG image, with an ideogramoutput architecture, where the patterns are represented with several HSV values (only value varies). The method can perform both in small- and large-scale. Nevertheless is more directed to large-scale since that the main aim of the research is to know where the large-scale [chromosomal by chromosome] of several primates was equal/different, having at a glance a map of the entire genomes.

Address of the bookmark: http://bioinformatics.ua.pt/software/smash/

AccNET

Jitendra Narayan — Fri, 07 Oct 2016 05:22:11 -0500

AccNET is a Perl application that presents a new way to study the accessory genome of a given set of organisms. Using the proteomes of these organisms, AccNET create a bipartite network compatible with common network analysis platforms. AccNET collects phylogenetic and functional information in a network improving the analysis capability. Networks offer a new perspective of organism organization through elements acquired by horizontal gene transfers and not constricted by hierarchical structures.

More at https://www.youtube.com/watch?v=vdGuy1GAJrQ

Address of the bookmark: https://sourceforge.net/projects/accnet/

SATSUMA : Highly sensitive whole-genome synteny alignments.

Jit — Fri, 13 May 2016 05:25:26 -0500

Satsuma is a whole-genome synteny alignment program. It takes two genomes, computes alignments, and then keeps only the parts that are orthologous, i.e. following the conserved order and orientation of features, such as protein coding genes, non-coding genes, or neutral sequences. Satsuma does not require any pre-processing, such as repeat masking, since it will automatically detect ambiguous mappings.

Satsuma has parallelization built-in and is designed to run on multi-core architectures. The run-time for aligning two bird-size genomes (~1.2 Gb) is around two days on 24 CPUs.

You can find the manual here.
Download the latest source code from here.
Stable versions can also be downloaded from the Broad Institute's web site.

An incomplete list of questions and answers (yes, these have really been asked by our users! Please feel free to add your own by e-mailing us) is here.

If you use Satsuma in your research, please cite:
Grabherr, M. G., Russell, P., Meyer, M., Mauceli, E., Alföldi, J., Di Palma, F., & Lindblad-Toh, K. (2010). Genome-wide synteny through highly sensitive sequence alignment: Satsuma. Bioinformatics, 26(9), 1145-51.

Tutorial at http://evomics.org/learning/genomics/satsuma/

Address of the bookmark: http://satsuma.sourceforge.net/

KisSplice

Jit — Tue, 16 Aug 2016 08:34:19 -0500

KisSplice is a software that enables to analyse RNA-seq data with or without a reference genome. It is an exact local transcriptome assembler that allows to identify SNPs, indels and alternative splicing events. It can deal with an arbitrary number of biological conditions, and will quantify each variant in each condition. It has been tested on Illumina datasets of up to 1G reads. Its memory consumption is around 5Gb for 100M reads.

KisSplice is not a full-length transcriptome assembler. This means that it will output the variable regions of the transcripts, not reconstruct them entirely.

KisSplice comes as a workflow, with several possible post-treatments meant to facilitate the analysis of the results. The choice of the post-treatment depends on the availability of a reference genome/transcriptome and on the need to perform a differential analysis, as summarised in the following table.

Address of the bookmark: http://kissplice.prabi.fr/

GAEMR

Jit — Tue, 14 Jun 2016 06:18:37 -0500

The Genome Assembly Evaluation Metrics and Reporting (GAEMR) package is an assembly analysis framework composed a number of integrated modules. These modules can be executed as a single program to generate a complete analysis report, or executed individually to generate specific charts and tables. GAEMR standardizes input by converting a variety of read types to Binary Alignment Map (BAM) format, allowing a single input format to be entered into GAEMR’s analysis pipeline, hence enabling the generation of standard reports.

GAEMR’s analysis philosophy is centered on contiguity, correctness, and completeness -- how many pieces in an assembly composed of, how well those pieces accurately represent the genome sequenced, and how much of that genome is represented by those pieces. By performing over twenty different analyses based on these principles, GAEMR gives a clear picture of the condition of a genome assembly.

Address of the bookmark: https://www.broadinstitute.org/software/gaemr/