At present, some people have posted articles about the analysis process of WGD. I searched for the keyword "wgd pipeline" and found the following:

GenoDup: https:// github.com/MaoYafei/GenoDup-Pipeline
https://peerj.com/articles/6303/
WGDdetector: https:// github.com/yongzhiyang2 012/WGDdetector
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-019-2670-3
wgd: https:// github.com/arzwa/wgd
https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2#Sec1
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
GeNoGAP https://bmcbioinformatics.biomedcentral.com/articles/10.1186/s12859-016-1142-2
https://bmcbiol.biomedcentral.com/articles/10.1186/s12915-017-0399-x
https://github.com/dfguan/purge_dups
https://www.biorxiv.org/content/10.1101/2020.01.24.917997v1

This article introduces the usage of wgd.

Wgd cannot be installed directly with bioconda at present, so it is a little troublesome to install, because it depends on a lot of software. wgd depends on the following software

BLAST
MCL
MUSCLE/MAFFT/PRANK
PAML
PhyML/FastTree
i-ADHoRe

But the good news is that most of the software it depends on can be installed with bioconda

conda create -n wgd python=3.5 blast mcl muscle mafft prank paml fasttree cmake libpng mpi=1.0=mpich
conda activate wgd

Here mpi=1.0=mpich is selected, because i-adhore depends on mpich. If openmpi is installed, an error will appear while loading shared libraries: libmpi_cxx.so.40: cannot open shared object file: No such file or directory

After that, the installation is much simpler

git clone https://github.com/arzwa/wgd.git
cd wgd
pip install .
pip install git+https://github.com/arzwa/wgd.git
For i-ADHoRe, you need to register at http:// bioinformatics.psb.ugent.be /webtools/i-adhore/licensing/Agree to the license to download i-ADHoRe-3.0

Since my miniconda3 installed ~/opt/, the installation path is so~/opt/miniconda3/envs/wgd/

tar -zxvf i-adhore-3.0.01.tar.gz
cd i-adhore-3.0.01
mkdir -p build && cd build
cmake .. -DCMAKE_INSTALL_PREFIX=~/opt/miniconda3/envs/wgd/
make -j 4
make insatall

Take the sugarcane genome Saccharum spontaneum L as an example. The genome is 8-ploid with 32 chromosomes (2n = 4x8 = 32)

Download the tutorial for CDS and GFF annotation files

mkdir -p wgd_tutorial && cd wgd_tutorial
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.cds.fasta.gz
wget http://www.life.illinois.edu/ming/downloads/Spontaneum_genome/Sspon.v20190103.gff3.gz
gunzip *.gz

First conda activate wgdstart our analysis environment, and then start the analysis

Step 1 : Use to wgd mclidentify homologous genes in the genome

wgd mcl -n 20 --cds --mcl -s Sspon.v20190103.cds.fasta -o Sspon_cds.out

Step 2 : Use to wgd ksdbuild Ks distribution

wgd ksd --n_threads 80 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl Sspon.v20190103.cds.fasta

Step 3 : If the quality of the genome is good, then wgd syncollinearity analysis can be used . It can help us find the collinearity block in the genome and the corresponding anchor point

wgd syn --feature gene --gene_attribute ID \
-ks wgd_ksd/Sspon.v20190103.cds.fasta.ks.tsv \
Sspon.v20190103.gff3 Sspon_cds.out/Sspon.v20190103.cds.fasta.blast.tsv.mcl

 For more reading - There are 9 sub-modules in WGD

• kde: KDE fitting to the Ks distribution
• ksd: Ks distribution construction
• mcl: BLASP comparison of All-vs-ALl + MCL classification analysis.
• mix: Hybrid modeling of Ks distribution.
• pre: preprocess the CDS file
• syn: Call I-ADHoRe 3.0 to use GFF files for collinearity analysis
• viz: draw histogram and density plot
• wf1: Ks standard analysis procedure of the whole genome paranome (paranome), call mcl, ksd and syn
• wf2: Ks standard analysis procedure of one-vs-one homologous gene (ortholog), call wcl and kSD

Address of the bookmark: https://training.galaxyproject.org/training-material/topics/variant-analysis/tutorials/non-dip/tutorial.html

If you are interested in gene prediction, have a look at GenomeThreader.

http://genometools.org/pub/

Address of the bookmark: http://genometools.org/

https://ftp.ncbi.nlm.nih.gov/refseq/release/viral/

Address of the bookmark: https://ftp.ncbi.nlm.nih.gov/refseq/release/viral/

Address of the bookmark: http://crossmap.sourceforge.net/

Address of the bookmark: https://cmdcolin.github.io/awesome-genome-visualization/?latest=true&selected=%23BRIG&tag=Comparative

Address of the bookmark: https://www.science.org/doi/10.1126/science.abj6987

1. SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.

2. ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.

3. Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.

4. SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.

5. MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.

6. Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.

7. Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.

8. SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.

9. SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.

10. Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.

11. Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.

12. wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.

13. Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.

14. Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.

15. CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.

16. Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

• Clustering module Predicts, clusters and annotates the genes of every input genome
• Lifestyle prediction Employs a machine learning model to forecast bacterial lifestyle or other specified metadata
• Analitical module (Shiny app) Results from the previous modules are embedded in a user-friendly interface for comprehensive and interactive comparative genomics.

You can find the complete wiki here [https://github.com/Carrion-lab/bacLIFE/wiki/bacLIFE-wiki]

Address of the bookmark: https://github.com/Carrion-lab/bacLIFE

1. Earth BioGenome Project (EBP) - A global effort to sequence and annotate roughly 1.5 million known eukaryotic species and create a comprehensive reference library of Earth's biodiversity.
2. Vertebrate Genomes Project (VGP) - Focuses on producing high-quality reference genomes for vertebrate species, providing a major foundation for the wider Tree of Life.
3. Darwin Tree of Life - A UK and Ireland initiative aiming to sequence approximately 70,000 species, creating a detailed genomic map of regional biodiversity.
4. African BioGenome Project (AfricaBP) - A pan-African initiative focused on sequencing Africa's biodiversity while strengthening genomics and bioinformatics capacity across the continent.
5. European Reference Genome Atlas (ERGA) - A European effort to generate high-quality reference genomes for Europe's biodiversity and connect national sequencing efforts.
6. Canada BioGenome Project - Building reference genomes for Canadian biodiversity, supporting conservation, research and the study of ecosystems.
7. California Conservation Genomics Project - Uses genomics to understand and protect California's biodiversity and help inform conservation decisions.
8. Bat1K - An ambitious global effort to sequence the genomes of all known bat species, helping scientists study their evolution, longevity, immunity and unique biology.
9. Bird 10,000 (B10K) - A global project aiming to create genome resources covering the world's bird diversity and reconstruct avian evolutionary history.
10. Global Invertebrate Genomics Alliance (GIGA) - Builds genomic resources for the enormous and genetically diverse world of invertebrates.
11. GenomeIndia - India's national human-genome initiative, designed to capture the country's extraordinary population diversity and create a reference resource for Indian genomics.
12. All of Us Research Program - A US national research program combining genomic information with health and lifestyle data at population scale.
13. 1+ Million Genomes / Genome of Europe - A European effort to enable secure, cross-border use of genomic and health data and develop genome-scale resources involving more than one million people.
14. Korea National Integrated Bio Big Data Project - South Korea's large-scale national effort combining genomic and health information from a very large population cohort.
15. Saudi Genome Program - A national genomics initiative focused on genetic diseases, population genomics and precision medicine in Saudi Arabia.
16. Australian Genomics / Genomics Health Futures Mission - Australia's growing investment in genomic medicine, rare disease research and population-scale health genomics.