BOL: Related items

wtdbg2: A fuzzy Bruijn graph approach to long noisy reads assembly

BioStar — Mon, 04 Feb 2019 04:53:47 -0600

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output.

./wtdbg2 -x rs -g 4.6m -t 16 -i reads.fa.gz -fo prefix
./wtpoa-cns -t 16 -i prefix.ctg.lay.gz -fo prefix.ctg.fa

Address of the bookmark: https://github.com/ruanjue/wtdbg2

TRITEX sequence assembly pipeline for Triticeae genomes

Jit — Tue, 20 Aug 2019 09:47:14 -0500

The pipeline is open-source and hosted in a public Bitbucket repository.

TRITEX has been run on highly inbred genotypes of barley (Hordeum vulgare), tetraploid wheat (Triticum turgidum) and hexaploid wheat (T. aestivum) with reasonable results: super-scaffold N50 values in the range of dozens of Mb and pseudomolecules with better gene space representation than a BAC-by-BAC assembly. It has never been tested and is not expected to work on heterozygous or autopolyploid genomes.

A protocol for generating chromosome-conformation capture sequencing (Hi-C) data suitable for use with the pipeline is described in Himmelbach et al. 2018. Refer to the technical notes of 10X Genomics on how to generate Chromium data.

Address of the bookmark: https://tritexassembly.bitbucket.io/

Free Genomics data !

BioStar — Fri, 07 Feb 2020 14:08:31 -0600

The specimens were collected by the Oxford Wytham Woods and Edinburgh Lohse lab teams. DNA extraction and sequencing was carried out by the Sanger Institute Scientific Operations teams. Assemblies were carried out by the Tree of Life team (Shane McCarthy) and colleagues in Pacific Biosciences (Jonas Korlach).

https://www.darwintreeoflife.org/an-initial-set-of-raw-genome-assemblies-from-the-darwin-tree-of-life-project/

Address of the bookmark: https://www.darwintreeoflife.org/an-initial-set-of-raw-genome-assemblies-from-the-darwin-tree-of-life-project/

Software for genome assembly !

LEGE — Sun, 30 Aug 2020 09:51:38 -0500

List of bioinformatics tools/Software Website References for genome assembly:

1 Falcon https://github.com/PacificBiosciences/pb-assembly

2 Canu assembler http://canu.readthedocs.io/en/latest/index.html

3 Miniasm assembler https://github.com/lh3/miniasm

4 PBJelly scaffolding tool https://sourceforge.net/projects/pb-jelly/

5 ARCS scaffolding tool https://github.com/bcgsc/arcs

6 Redundans reduction and scaffolding tool https://github.com/Gabaldonlab/redundans

7 Arrow error correction https://github.com/PacificBiosciences/ GenomicConsensus

8 PILON error correction https://github.com/broadinstitute/pilon/wiki

9 BUSCO single copy gene markers http://busco.ezlab.org/

10 Bandage graph assembly viewer https://rrwick.github.io/Bandage/

11 Gepard dotter http://cube.univie.ac.at/gepard

12 MUMmer aligner and plotter http://mummer.sourceforge.net/

CSA: A high-throughput chromosome-scale assembly pipeline for vertebrate genomes

Jit — Wed, 10 Mar 2021 06:13:49 -0600

The pipeline can use information from scaffolded assemblies (for example from HiC or 10X Genomics), or even from diverged (~65-100 Mya) reference genomes for ordering the contigs and thus support the assembly process. This typically results in improved contig N50 when compared to current state of the art methods.

For smaller vertebrate genomes (~1 Gbp) chromosome scale assemblies can be achieved within 12h on high-end Desktop computers (Intel i7, 12 CPU threads, 128 GB RAM). Larger mammalian genomes (~3Gbp) can be processed within 15-18 h on server equipment (Xeon, 96 CPU threads, 1TB RAM).

Address of the bookmark: https://github.com/HMPNK/CSA2.6

Bioinformatics tools for genome assembly !

BioStar — Mon, 24 Jul 2023 07:04:26 -0500

There are numerous genome assembly tools available, each with its strengths and weaknesses. Here is a list of some widely used genome assembly tools as of my last update in September 2021:

SPAdes: An assembler specifically designed for single-cell and multi-cell bacterial genomes, as well as small eukaryotic genomes.
ABySS: A parallelized assembler for large genomes that uses de Bruijn graphs.
Velvet: Another de Bruijn graph-based assembler optimized for short-read sequencing data.
SOAPdenovo: A de Bruijn graph-based assembler designed for short reads, widely used for assembling large and complex genomes.
MaSuRCA: A hybrid assembler that combines data from multiple sequencing technologies, such as Illumina and PacBio.
Canu: A long-read assembler optimized for PacBio and Oxford Nanopore sequencing data.
Flye: A long-read assembler suitable for bacterial and small eukaryotic genomes.
SMARTdenovo: An assembler designed for long reads, particularly suited for PacBio data.
SPAdes Long Read (SPAdesLR): An extension of SPAdes for long-read data, such as those from PacBio or Nanopore.
Minia: An assembler optimized for low memory consumption, suitable for small and medium-sized genomes.
Unicycler: A hybrid assembler that combines short and long reads for circular bacterial genome assembly.
wtdbg2: A de Bruijn graph assembler for long reads, efficient for very large genomes.
Shasta: A long-read assembler that uses the Overlap-Layout-Consensus approach, suitable for PacBio and Nanopore data.
Sparc: An assembler designed to handle noisy long reads from Nanopore sequencing.
CANA: An assembler for metagenomic data, particularly for complex and diverse microbial communities.
Ra Assembler: A metagenome assembler for long reads, designed for highly complex metagenomic samples.

Please note that the field of bioinformatics is constantly evolving, and new assembly tools may have emerged since my last update. Additionally, the performance of these tools can vary depending on the characteristics of the sequencing data and the genome being assembled. When selecting an assembly tool, consider the specific requirements of your project, the available data types, and the computational resources at your disposal. Always refer to the respective tool's documentation and publications for the most up-to-date information and recommendations.

TRITEX, a computational pipeline for chromosome-scale assembly of plant genomes

LEGE — Fri, 14 Feb 2025 10:53:48 -0600

This is the documentation of TRITEX, a computational pipeline for chromosome-scale assembly of plant genomes. It was developed in the research group Domestication Genomics at the Leibniz Institute of Plant Genetics and Crop Research (IPK) Gatersleben.

Address of the bookmark: https://tritexassembly.bitbucket.io/

VAGUE:Velvet Assembler Graphical Front End

Jit — Fri, 24 Feb 2017 08:56:49 -0600

VAGUE is a vague acronym for "Velvet Assembler Graphical Front End", which means it is a GUI for the Velvet de novo assembler. The command line version of Velvet can be complicated for beginners to use, but VAGUE makes it clear and simple

More at http://www.vicbioinformatics.com/software.vague.shtml

Address of the bookmark: http://www.vicbioinformatics.com/software.vague.shtml

Minia

Jit — Thu, 08 Dec 2016 05:07:00 -0600

Minia is a short-read assembler based on a de Bruijn graph, capable of assembling a human genome on a desktop computer in a day. The output of Minia is a set of contigs. Minia produces results of similar contiguity and accuracy to other de Bruijn assemblers (e.g. Velvet).

Download

Minia 2.0.7 Linux 64-bits binaries (Source code) (Legacy codebase)

For the impatient

A typical Minia command line looks like:

./minia -in reads.fa -kmer-size 31 -abundance-min 3 -out output_prefix

Type

./minia

for a quick explanation of the parameters.

For more information, refer to the manual.

KmerGenie can be used to determine the best k-mer size, minimum abundance of correct k-mers, and genome size estimation for your dataset.

Address of the bookmark: http://minia.genouest.org/

GARM:Genome Assembly, Reconciliation and Merging

Jit — Mon, 19 Dec 2016 06:03:02 -0600

The pipeline is based mainly implemented using Perl scripts and modules and third-party open source software like the AMOS (Myers et al., 2000) and MUMmer (Kurtz et al., 2004) packages. The pipeline was tested on Debian, Ubuntu, Fedora and BioLinux distributions. The method merges contigs or scaffolds from different assemblers using the same or different sequencing technologies. When scaffolds are provided, a process of finding probable compressions or extensions (CE) problems in the assemblies can be per-formed; contigs are joined back into scaffolds after gap recalculation

Address of the bookmark: http://garm-meta-assem.sourceforge.net/