BOL: Related items

NextDenovo: string graph-based de novo assembler for TGS long reads

Jit — Sun, 05 Jan 2020 04:08:29 -0600

NextDenovo is a string graph-based de novo assembler for TGS long reads. It uses a "correct-then-assemble" strategy similar to canu, but requires significantly less computing resources and storages. After assembly, the per-base error rate is about 97-98%, to further improve single base accuracy, please use NextPolish.

NextDenovo contains two core modules: NextCorrect and NextGraph. NextCorrect can be used to correct TGS long reads with approximately 15% sequencing errors, and NextGraph can be used to construct a string graph with corrected reads. It also contains a modified version of minimap2 for adapting input and output and producing more sensitive and accurate dovetail overlaps, and some useful utilities (see here for more details).

Address of the bookmark: https://github.com/Nextomics/NextDenovo

MaxBin: software for binning assembled metagenomic sequences based on an Expectation-Maximization algorithm.

Jit — Mon, 06 Mar 2017 04:03:38 -0600

MaxBin is software for binning assembled metagenomic sequences based on an Expectation-Maximization algorithm. Users can understand the underlying bins (genomes) of the microbes in their metagenomes by simply providing assembled metagenomic sequences and the reads coverage information or sequencing reads. For users' convenience MaxBin will report genome-related statistics, including estimated completeness, GC content and genome size in the binning summary page.

Users can use MEGAN or similar software on MaxBin bins to find the taxonomy of each bin after the binning process is finished.

https://academic.oup.com/bioinformatics/article/32/4/605/1744462/MaxBin-2-0-an-automated-binning-algorithm-to

The most recent version of MaxBin is 2.2, which supports the analysis of coassemblies of multiple samples. It is available at this JBEI downloads sites as well as MaxBin and MaxBin 2.0 sourceforge sites.

Address of the bookmark: http://downloads.jbei.org/data/microbial_communities/MaxBin/MaxBin.html

Flye: Fast and accurate de novo assembler for single molecule sequencing reads

Jit — Fri, 04 May 2018 19:16:22 -0500

Flye is a de novo assembler for long and noisy reads, such as those produced by PacBio and Oxford Nanopore Technologies. The algorithm uses an A-Bruijn graph to find the overlaps between reads and does not require them to be error-corrected. After the initial assembly, Flye performs an extra repeat classification and analysis step to improve the structural accuracy of the resulting sequence. The package also includes a polisher module, which produces the final assembly of high nucleotide-level quality.

Address of the bookmark: https://github.com/fenderglass/Flye

LACHESIS: Genome Assembly with Hi-C-based Contact Probability Maps (LACHESIS)

Jit — Mon, 14 May 2018 04:26:30 -0500

LACHESIS is method that exploits contact probability map data (e.g. from Hi-C) for chromosome-scale de novo genome assembly.

Further information about LACHESIS, including source code, documentation and a user's guide are available at: http://shendurelab.github.io/LACHESIS.

Manuscript describing LACHESIS was published as: Burton JN#, Adey A, Patwardhan RP, Qiu R, Kitzman JO, Shendure J#. Chromosome-scale scaffolding of de novo genome assemblies based on chromatin interactions. Nature Biotechnology 2013 Dec;31(12):1119-25. doi: 10.1038/nbt.272. PubMed PMID: 24185095.

http://shendurelab.github.io/LACHESIS/

Address of the bookmark: http://shendurelab.github.io/LACHESIS/

BEAP: Blast Extension and Assembly Program

Shruti Paniwala — Mon, 11 Jun 2018 04:52:56 -0500

The Blast Extension and Assembly Program (BEAP) is a computer program that uses a short starting DNA fragment, often a EST or partial gene segment, as "primer", to recursively blast nucleotide databases in an attempt to obtain all sequences that overlaps, directly or indirectly, with the "primer" therefore help to "extend" the length of the original sequence for constructing a "full length" sequence for functional analysis, or at least to obtain neighboring regions of the segment for SNP discovery and linkage disequilibrium analysis. The confidence of assembling the resulting sequences is achieved by using a known genome, such as human genome, as a reference. https://www.animalgenome.org/tools/beap/

Address of the bookmark: https://www.animalgenome.org/tools/beap/

LoFreq*: A sequence-quality aware, ultra-sensitive variant caller for NGS data

BioStar — Tue, 18 Feb 2020 03:24:22 -0600

LoFreq* (i.e. LoFreq version 2) is a fast and sensitive variant-caller for inferring SNVs and indels from next-generation sequencing data. It makes full use of base-call qualities and other sources of errors inherent in sequencing (e.g. mapping or base/indel alignment uncertainty), which are usually ignored by other methods or only used for filtering.

https://github.com/CSB5/lofreq

http://csb5.github.io/lofreq/installation/

https://github.com/CSB5/lofreq/tree/master/dist

Address of the bookmark: http://csb5.github.io/lofreq/

Submit your SARS-CoV-2 sequence data to GenBank

Neel — Thu, 09 Apr 2020 18:28:25 -0500

Submit your SARS-CoV-2 sequence data to GenBank and SRA with our new submission landing page. Submission is simple and streamlined *and* there’s a rapid turnaround. https://submit.ncbi.nlm.nih.gov/sarscov2/

Quickly and easily add your SARS-CoV-2 sequence data to the growing public archive with new, special features and support from NCBI. new SARS-CoV-2 sequence submission landing page will help you get started. GenBank submissions are accessioned and released in approximately 1-2 working days, and Sequence Read Archive (SRA) submissions typically processed and released within hours. Submission is simple!

More information is available on NCBI Insights. https://ncbiinsights.ncbi.nlm.nih.gov/2020/04/09/sars-cov2-data-streamlined-submission-rapid-turnaround/

Wtdbg2: a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore

Neel — Fri, 19 Oct 2018 08:48:43 -0500

Wtdbg2 is a de novo sequence assembler for long noisy reads produced by PacBio or Oxford Nanopore Technologies (ONT). It assembles raw reads without error correction and then builds the consensus from intermediate assembly output. Wtdbg2 is able to assemble the human and even the 32Gb Axolotl genome at a speed tens of times faster than CANU and FALCONwhile producing contigs of comparable base accuracy.

Address of the bookmark: https://github.com/ruanjue/wtdbg2

RefKA: A fast and efficient long-read genome assembly approach for large and complex genomes

Rahul Nayak — Fri, 01 May 2020 03:00:40 -0500

RefKA, a reference-based approach for long read genome assembly. This approach relies on breaking up a closely related reference genome into bins, aligning k-mers unique to each bin with PacBio reads, and then assembling each bin in parallel followed by a final bin-stitching step.

Address of the bookmark: https://github.com/AppliedBioinformatics/RefKA

miniasm: very fast OLC-based de novo assembler for noisy long reads

Jit — Mon, 27 Nov 2017 07:58:49 -0600

Miniasm is a very fast OLC-based de novo assembler for noisy long reads. It takes all-vs-all read self-mappings (typically by minimap) as input and outputs an assembly graph in the GFA format. Different from mainstream assemblers, miniasm does not have a consensus step. It simply concatenates pieces of read sequences to generate the final unitig sequences. Thus the per-base error rate is similar to the raw input reads.

So far miniasm is in early development stage. It has only been tested on a dozen of PacBio and Oxford Nanopore (ONT) bacterial data sets. Including the mapping step, it takes about 3 minutes to assemble a bacterial genome. Under the default setting, miniasm assembles 9 out of 12 PacBio datasets and 3 out of 4 ONT datasets into a single contig. The 12 PacBio data sets are PacBio E. coli sample, ERS473430, ERS544009, ERS554120, ERS605484, ERS617393, ERS646601, ERS659581, ERS670327, ERS685285, ERS743109 and a deprecated PacBio E. coli data set. ONT data are acquired from the Loman Lab.

For a C. elegans PacBio data set (only 40X are used, not the whole dataset), miniasm finishes the assembly, including reads overlapping, in ~10 minutes with 16 CPUs. The total assembly size is 105Mb; the N50 is 1.94Mb. In comparison, the HGAP3produces a 104Mb assembly with N50 1.61Mb. This dotter plot gives a global view of the miniasm assembly (on the X axis) and the HGAP3 assembly (on Y). They are broadly comparable. Of course, the HGAP3 consensus sequences are much more accurate. In addition, on the whole data set (assembled in ~30 min), the miniasm N50 is reduced to 1.79Mb. Miniasm still needs improvements.

Miniasm confirms that at least for high-coverage bacterial genomes, it is possible to generate long contigs from raw PacBio or ONT reads without error correction. It also shows that minimap can be used as a read overlapper, even though it is probably not as sensitive as the more sophisticated overlapers such as MHAP and DALIGNER. Coupled with long-read error correctors and consensus tools, miniasm may also be useful to produce high-quality assemblies.

Minimap and miniasm are ultrafast tools for (i) mapping and (ii) assembly. Designed for long, noisy reads, they do not have a correction or consensus step, and therefore the resulting assemblies are contiguous (i.e. long) but very noisy (i.e. full of errors)

We start with an all against all comparison:

minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz

Then we can assemble

miniasm -f reads.fq reads.paf.gz > reads.gfa

Convert GFA to FASTA:

awk '/^S/{print ">"$2"\n"$3}' reads.gfa | fold > reads.fa

And then count how many contigs:

grep ">" reads.fa | wc -l

# Download sample PacBio from the PBcR website
wget -O- http://www.cbcb.umd.edu/software/PBcR/data/selfSampleData.tar.gz | tar zxf -
ln -s selfSampleData/pacbio_filtered.fastq reads.fq
# Install minimap and miniasm (requiring gcc and zlib)
git clone https://github.com/lh3/minimap && (cd minimap && make)
git clone https://github.com/lh3/miniasm && (cd miniasm && make)
# Overlap
minimap/minimap -Sw5 -L100 -m0 -t8 reads.fq reads.fq | gzip -1 > reads.paf.gz
# Layout
miniasm/miniasm -f reads.fq reads.paf.gz > reads.gfa

Address of the bookmark: https://github.com/lh3/miniasm