Please see Achieving Success with De Novo Assembly and System Requirements before creating your Chromium libraries for assembly.

Supernova should be run using 38-56x coverage of the genome.
• Somewhat higher coverage is sometimes advantageous.
• Supernova will exit if it finds that coverage is far from the recommended range.
• Note that at most 2.14 billion reads are allowed.
• Please note that we have not extensively tested genomes larger than human, and any genome above approximately 4 GB should be considered experimental and is not supported.

Address of the bookmark: https://support.10xgenomics.com/de-novo-assembly/software/pipelines/latest/using/running

https://www.biorxiv.org/content/biorxiv/early/2021/02/01/2021.01.29.428779.full.pdf

Address of the bookmark: https://github.com/nadegeguiglielmoni/GraphUnzip

nf-core/mag v5 (https://github.com/nf-core/mag) addresses this challenge by extending its reproducible Nextflow-based workflow for modern genome-resolved metagenomics.

A key addition is support for long-read-only metagenomic assembly and bin refinement, enabling long-read data to be processed through an integrated workflow. The release also introduces five additional binning tools, providing complementary strategies for recovering genomes from complex microbial communities.

The workflow has also expanded beyond conventional bacterial and archaeal MAGs, with improved classification of viruses and eukaryotes, together with enhanced genome-quality assessment.

Conceptually, the workflow brings together:

Reads → QC → Assembly → Binning → Bin refinement → Taxonomic classification → MAG quality assessment

The real strength of nf-core/mag is not any single algorithm, but the integration and reproducibility of multiple tools within a standardized workflow. This is particularly important for large-scale metagenomic studies where software versions, parameters, databases and computational environments can strongly influence results.

After seven years of development involving multiple curator teams and the wider nf-core community, v5 demonstrates how community-driven workflow development can keep metagenomic analysis aligned with rapidly evolving sequencing technologies.

The future of genome-resolved metagenomics is not simply longer reads—it is better integration of assembly, binning, refinement and quality control within reproducible computational workflows.

Read the full paper in Bioinformatics https://academic.oup.com/bioinformatics/article/42/9/btag628/8770536?

Grouping large genomic fragments assembled from shotgun metagenomic sequences to deconvolute complex microbial communities, or metagenome binning, enables the study of individual organisms and their interactions. Here we developed an automated metagenome binning software, called MetaBAT, which integrates empirical probabilistic distances of genome abundance and tetranucleotide frequency. Tested on both synthetic and real metagenome datasets, MetaBAT outperforms alternative methods in both accuracy and computational efficiency. Applying MetaBAT to an assembly from 1,704 human gut samples formed 1,634 genome bins (>200kb) in 3 hours, where 621 genome bins are >50% complete with <5% contamination from other species. Further analysis shows that the quality of these genome bins approaches manually curated genomes.

Address of the bookmark: https://bitbucket.org/berkeleylab/metabat

Address of the bookmark: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3158087/

Address of the bookmark: http://www.phrap.org/consed/consed.html

What is de novo genome assembly?
The method of taking a large number of short DNA sequences and placing them back together to create a reflection of the original chromosomes from which the DNA originated relates to genome assembly. No previous knowledge of the source DNA sequence length, structure or composition is inferred by De novo genome assemblies. The DNA of the target organism is split up into millions of tiny parts and read on a sequencing computer in a genome sequencing experiment. Depending on the sequencing system used, these "reads" range from 20 to 1000 nucleotide base pairs (bp) in length. Usually, length reads of 36 - 150 bp are produced for Illumina style short read sequencing. These reads can be either “single ended” as described above or “paired end.”

Why genome assembly?
In basic research into why and how they live, as well as in applied topics, identifying the DNA sequence of an organism is useful. Awareness of a DNA sequence may be useful in virtually any biological research because of the relevance of DNA to living things. For example, it may be used in medicine to classify, diagnose and eventually improve genetic disorder therapies. Similarly, pathogens study can lead to treatments for infectious diseases.

Raw NGS data
Reads can be saved as a Fasta file as text or in a FastQ file with their attributes. FastQ is the most common read file format since this is what the Illumina sequencing pipeline creates. This will henceforth be the subject of our conversation.

In a nutshell the protocol:
Get the sequence file(s) read from the sequencing machine (s).
Look at the readings - have an idea of what you have and what the standard is like.
If required, raw data cleanup/quality trimming.
Choose an adequate parameter set for assembly.
Assemble the data into scaffolds/contigs.
Examine the assembly performance and determine the efficiency of the assembly.

Read Quality Control:
Check the qualiy with fastQC.
Script
https://bioinformaticsonline.com/snippets/view/42540/install-fastqc-using-conda

Quality trimming/cleanup of read files.
This function trims adapters, barcodes and other contaminants from the reads.
Script
https://bioinformaticsonline.com/snippets/view/42542/trimmomatic-command

Genome Assembly:
The object of this portion of the protocol is to explain the method of assembling the reads trimmed by quality into draft contigs.

spades.py -1 illumina_R1.fastq.gz -2 illumina_R2.fastq.gz --careful --cov-cutoff auto -o result_of_spades_assembly_all_illumina

A significant range of short-read assemblers are available. Everyone with strengths and disadvantages of their own.
Some of the assemblers available include:
Velvet
SOAP-denovo
MIRA
ALLPATHS

Next step is to assess the suitability and what to do with a draft package of contiguous details for the remainder of the study now. Few stuff you can note about the contigs you just created: They're the draft Contigs. Any mis-assemblies can occur.

Mis-assembly checking and assembly metric tools:
QUAST - Quality assessment tool for genome assembly http://bioinf.spbau.ru/quast
Mauve assembly metrics - http://code.google.com/p/ngopt/wiki/How_To_Score_Genome_Assemblies_with_Mauve
InGAP-SV - https://sites.google.com/site/nextgengenomics/ingap and http://ingap.sourceforge.net/
inGAP is also useful for finding structural variants between genomes from read mappings.

Genome finishing tools:
Semi-automated gap fillers:
Gap filler - http://www.baseclear.com/landingpages/basetools-a-wide-range-of-bioinformatics-solutions/gapfiller/

IMAGE (V2) - http://sourceforge.net/apps/mediawiki/image2/index.php?title=Main_Page

Genome visualisers and editors:
Artemis - http://www.sanger.ac.uk/resources/software/artemis/
IGV - http://www.broadinstitute.org/igv/

Automated and semi automated annotation tools:
Prokka - https://github.com/tseemann/prokka
RAST - http://www.nmpdr.org/FIG/wiki/view.cgi/FIG/RapidAnnotationServer
JCVI Annotation Service - http://www.jcvi.org/cms/research/projects/annotation-service/

Frequent command use for the analysis are at:

https://bioinformaticsonline.com/blog/view/38765/list-of-tools-frequently-used-while-genome-assembly
https://bioinformaticsonline.com/pages/view/42275/frequent-parameters-for-bioinformatics-tools

Address of the bookmark: https://github.com/reubwn/hgt

• single-end/paired-end bulk RNA-seq (strand-specific/agnostic)
• paired-end single-cell RNA-seq (strand-specific/agnostic)
• nanopore RNA-seq (PCR cDNA/direct cDNA/direct RNA)

Written by Ka Ming Nip ✉️

Address of the bookmark: https://github.com/bcgsc/RNA-Bloom

Following are the list of Ancestral /sequence/ reconstruction (ASR) tools: 

inferCars

Reconstructs contiguous regions of an ancestral genome. Given information about adjacencies between conserved segments in each modern species, our goal is to infer segment order in the ancestral genome. To get a clean and precise statement of the problem, we formalize it using graph theory. We develop an algorithm that identifies a most parsimonious scenario for the history of each individual adjacency, although the whole-genome prediction is not guaranteed to optimize traditional measures like the number of breakpoints. We introduce weights to the graph edges to model the reliability of each adjacency.

ANGES:reconstructing ANcestral GEnomeS maps

A suite of Python programs that allows reconstructing ancestral genome maps from the comparison of the organization of extant-related genomes. ANGES can reconstruct ancestral genome maps for multichromosomal linear genomes and unichromosomal circular genomes. It implements methods inspired from techniques developed to compute physical maps of extant genomes.

Cocos

Constructs phylogenies of multi-domain proteins. With a given species tree and domain phylogenies, the procedure infers the composition of ancestral multi-domain proteins. Cocos implements and extend a suggested algorithmic approach by Behzadi and Vingron in an easy-to-use program. Such method could be applied to reconstruction of partial homologous units such as bacterial operons or protein complexes.

MySSP

Constructs an initial DNA sequence at the root of the tree and simulates evolution across the tree using a variety of common models of DNA evolution. MySSP is a program for the simulation of DNA sequence evolution across a phylogenetic tree. It is designed for large-scale studies, including simulation of multiple replicates and outputs sequences into NEXUS, MEGA, or FASTA formats. MySSP has a fairly simple graphical user interface (GUI) for basic use, but also has a specialized batch script interpreter to allow for more complicated or large-scale simulations.

PARANA: Parsimonious Ancestral Reconstruction And Network Analysis

Performs parsimony based inference of ancestral biological networks. Given multiple extant networks and phylogenetic information relating extant nodes, PARANA finds a parsimonious set of ancestral interaction events (edge gains and losses) which explain the extant networks. The framework adopted by PARANA is able to represent network evolution under models that support gene duplication and loss and independent interaction gain and loss. The method works on both directed and undirected networks and can incorporate asymmetric interaction gain and loss costs. In contrast to previous approaches, PARANA does not require knowing the relative ordering of unrelated duplication events and thus, works on phylogenetic trees even where branch lengths are not provided.

GapAdj: Gapped Adjacencies

A synteny-based method that is flexible enough to handle a model of evolution involving whole genome duplication events, in addition to rearrangements, gene insertions, and losses. Ancestral relationships between markers are defined in term of Gapped Adjacencies, i.e. pairs of markers separated by up to a given number of markers. It improves on a previous restricted to direct adjacencies, which revealed a high accuracy for adjacency prediction, but with the drawback of being overly conservative, i.e. of generating a large number of contiguous ancestral regions (CARs).

ANCESTOR

A web server allowing one to easily and quickly perform the last three steps of the ancestral genome reconstruction procedure. Ancestors implements several alignment algorithms, an indel maximum likelihood solver and a context-dependent maximum likelihood substitution inference algorithm. The results presented by the server include the posterior probabilities for the last two steps of the ancestral genome reconstruction and the expected error rate of each ancestral base prediction.

ProCARs

Reconstructs ancestral gene orders as contiguous ancestral regions (CARs) with a progressive homology-based method. ProCARs runs from a phylogeny tree (without branch lengths needed) with a marked ancestor and a block file. This homology-based method is based on iteratively detecting and assembling ancestral adjacencies, while allowing some micro-rearrangements of synteny blocks at the extremities of the progressively assembled CARs. The method starts with a set of blocks as the initial set of CARs, and detects iteratively the potential ancestral adjacencies between extremities of CARs, while building up the CARs progressively by adding, at each step, new non-conflicting adjacencies that induce the less homoplasy phenomenon. The species tree is used, in some additional internal steps, to compute a score for the remaining conflicting adjacencies, and to detect other reliable adjacencies, in order to reach completely assembled ancestral genomes.

FastML

A user-friendly tool for the reconstruction of ancestral sequences. FastML implements various novel features that differentiate it from existing tools: (i) FastML uses an indel-coding method, in which each gap, possibly spanning multiples sites, is coded as binary data. FastML then reconstructs ancestral indel states assuming a continuous time Markov process. FastML provides the most likely ancestral sequences, integrating both indels and characters; (ii) FastML accounts for uncertainty in ancestral states: it provides not only the posterior probabilities for each character and indel at each sequence position, but also a sample of ancestral sequences from this posterior distribution, and a list of the k-most likely ancestral sequences; (iii) FastML implements a large array of evolutionary models, which makes it generic and applicable for nucleotide, protein and codon sequences; and (iv) a graphical representation of the results is provided, including, for example, a graphical logo of the inferred ancestral sequences.

maxAlike

Reconstructs a genomic sequence for a specific taxon based on sequence homologs in other species. The input is a multiple sequence alignment and a phylogenetic tree that also contains the target species. For this target species, the algorithm computes nucleotide probabilities at each sequence position. Consensus sequences are then reconstructed based on a certain confidence level.

MLGO: Maximum Likelihood for Gene Order Analysis

A web tool for the reconstruction of phylogeny and/or ancestral genomes from gene-order data. MLGO was designed for analysis of large-scale genomic changes including not only rearrangements but also gene insertions, deletions and duplications. MLGO can be used to infer a phylogeny from genome rearrangement and gene order data, and can also obtain an estimation of ancestral genomes, given an input tree. MLGO takes the advantage of binary encoding on gene-order data, supports a fairly general model of genomic evolution (rearrangements plus duplications, insertions, and losses of genomic regions), and successfully accommodates itself into the framework of maximized likelihood.

Image Reference : Wiki