BOL: Related items

Julia Programming Language, a Python and R rival

Radha Agarkar — Sat, 25 Aug 2018 04:46:39 -0500

Big data has grown to become one of the most lucrative fields. In fact, data scientists are some of the most sought people. They are usually hired to analyze, control and parse large chunks of data. Implementing these actions using traditional techniques is not a walk in the park. This is why most data scientists prefer using programming languages such as R and Python. However, there is one more programming language that can do the job. That is Julia programming language.

What Is Julia Language?

Julia is a programming language that came into the limelight in 2012. It is a general-purpose programming language that was designed for solving scientific computations. Julia was meant to be an alternative to Python, R and other programming languages that were mainly used for manipulating data. This is because it has numerous features that can minimize the complexities of numerical computations.

Julia optimizes on the best features of Python and R while at the same time overlooks their weaknesses. This explains why it is viewed as an alternative to these programming languages. For instance, it utilizes the readability and simplicity of Python then performs faster.

Julia is the most preferred programming language for data scientists and mathematicians. This is because its core features are similar to the ones that are used on most data software. Also, the language is ideal for these two subjects because its syntax is similar to the standard mathematical formulas.

Key Features Of Julia Language
Uses JIT Compilation
Parallelism
Dynamic Typing
Simple Syntax
Allows Metaprogramming
Accessible to Libraries
-1-Array Indexing

Julia Vs Python And R Programming Languages
1. Speed
Julia is faster than both Python and R. This is a very critical aspect that is given special attention in the big data programming. The high speed of Julia is because of JIT compilers. You will need to install external libraries on Python to achieve similar speed.

2. Syntax
Julia has a math-friendly syntax. The syntax of this programming language is similar to the mathematical formulas hence can be used to perform mathematical and scientific computations. This syntax makes it easier to learn than Python.

3. Parallelism
Although both Python and R use parallelism, Julia uses a top-level parallelism. Julia allows the processor to perform to the optimum level than what Python and R can achieve.

4. Versatility
Julia programming language is more versatile than Python and R. It allows a programmer to move from different codes and functions with ease.

The only area that Python and R are superior to Julia is in terms of community. Given that Julia is a new programming language, it has a small community as compared to others which have been around for years.

In overall Julia programming language is a better alternative that you can use to handle Big data projects. Despite having a small community, it is one of those programming languages that you can easily learn.

MEGADOCK 4.0

Suleman Khan — Thu, 07 Aug 2014 18:08:54 -0500

An ultra–high-performance protein–protein docking software for heterogeneous supercomputers

Summary: The application of protein–protein docking in large-scale interactome analysis is a major challenge in structural bioinformatics and requires huge computing resources. In this work, we present MEGADOCK 4.0, an FFT-based docking software that makes extensive use of recent heterogeneous supercomputers and shows powerful, scalable performance of over 97% strong scaling.

Availability and Implementation: MEGADOCK 4.0 is written in C++ with OpenMPI and NVIDIA CUDA 5.0 (or later) and is freely available to all academic and non-profit users at: http://www.bi.cs.titech.ac.jp/megadock.

Contact: akiyama@cs.titech.ac.jp

Address of the bookmark: http://bioinformatics.oxfordjournals.org/content/early/2014/08/06/bioinformatics.btu532.short

EyeChrom: Visualizing Chromosome Count Data From Plants

Jit — Tue, 08 Jan 2019 10:20:54 -0600

It's goal is to show chromosmal data per genus. Select the genus, and the plot will show the records found for it in the Chromosome Counts Database. note: Report an issue via Gihub: github.com/roszenil/CCDBcurator and github.com/RodrigoRivero/EyeChrom

https://bsapubs.onlinelibrary.wiley.com/doi/pdf/10.1002/aps3.1207

Address of the bookmark: http://eyechrom.com:3838/EyeChrom/

GrapheR !!!

John Parker — Thu, 14 Aug 2014 14:02:17 -0500

What a wonderful gem GrapheR is.... Oh yes it is. GrapheR is a GUI for base graphics in R by http://www.maximeherve.com/. The package provides a graphical user interface for creating base charts in R. It is ideal for beginners in R, as the user interface is very clear and the code is written along side into a text file, allowing users to recreate the charts directly in the console.

Adding and changing legends? Messing around with the plotting window settings? It is much easier/quicker with this GUI than reading the help file and trying to understand the various parameters.
Here is a little example using the iris data set.

library(GrapheR)
data(iris)
run.GrapheR()

This will bring up a window that helps me to create the chart and tweak the various parameters.

Finally, I find the underlying R code in a file created by GrapheR. For more details read also the package vignette, which is available in English, French and German!

DeepHiC: A Generative Adversarial Network for Enhancing Hi-C Data Resolution

Rahul Nayak — Tue, 03 Mar 2020 01:12:47 -0600

DeepHiC is a GAN-based model for enhancing Hi-C data resolution. We developed this server for helping researchers to enhance their own low-resolution data by a few steps of clicks. Ab initio training could be performed according to our published code. We provided trained models for various depth of low-coverage sequencing Hi-C data. The depth of input data is estimated by its distribution comparing with those of the downsampled Hi-C data we used in training

Address of the bookmark: http://sysomics.com/deephic

pybedtools

Shruti Paniwala — Wed, 20 Aug 2014 01:03:41 -0500

pybedtools is a Python wrapper for Aaron Quinlan's BEDtools programs (https://github.com/arq5x/bedtools), which are widely used for genomic interval manipulation or "genome algebra". pybedtools extends BEDTools by offering feature-level manipulations from with Python. See full online documentation, including installation instructions, at http://pythonhosted.org/pybedtools/.

More at http://pythonhosted.org/pybedtools/

A powerful toolset for genome arithmetic.http://code.google.com/p/bedtools/

Reference Sequence Resource!

LEGE — Wed, 15 Sep 2021 21:15:22 -0500

The ENCODE project uses Reference Genomes from NCBI or UCSC to provide a consistent framework for mapping high-throughput sequencing data. In general, ENCODE data are mapped consistently to 2 human (GRCH38, hg19) and 2 mouse (mm9/mm10) genomes for historical comparability. Drosophia melanogaster experiments are mapped to either dm3 or dm6 and Caenorhabdilis elegans experiments are mapped to ce10 or ce11. T

Address of the bookmark: https://www.encodeproject.org/data-standards/reference-sequences/

Roderic Guigó Lab

Mon, 01 Sep 2014 17:13:00 -0500

Research in our group focuses on the investigation of the signals involved in gene specification in genomic sequences (promoter elements, splice sites, translation initiation sites, etc…). We are interested both in the mechanism of their recognition and processing, and in their evolution. In addition, but related to this basic component of our research, our group is also involved in the development of software for gene prediction and annotation in genomic sequences. Our group also actively participates in the analysis of many eukaryotic genomes and it in involved in the NIH-funded ENCODE project. Furthermore we are members of two large cancer-studies consortia (chronic lymphocytic leukemia "CLL" and Breast Cancer -Hospital del Mar/CRG/Roche-).

More at http://big.crg.cat/computational_biology_of_rna_processing

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets

Neel — Sat, 06 Jul 2019 13:56:10 -0500

Simka is a de novo comparative metagenomics tool. Simka represents each dataset as a k-mer spectrum and compute several classical ecological distances between them.

Developper: Gaëtan Benoit, PhD, former member of the Genscale team at Inria.

Contact: claire dot lemaitre at inria dot fr

Simka and SimkaMin are comparative metagenomics method dedicated to NGS datasets. https://gatb.inria.fr/software/simka/

Address of the bookmark: https://github.com/GATB/simka

Bioinformatics JRF/SRF position at IARI

Thu, 04 Sep 2014 04:14:01 -0500

DIVISION OF NEMATOLOGY
INDIAN AGRICULTURAL RESEARCH INSTITUTE
NEW DELHI 110012
Applications are invited for the posts of one Junior
Research Fellow and one RA in the DBT funded project entitled “ Plant parasitic nematode genome informatics - insilico resource development”. The project is for a period of three years.

Essential qualifications for JRF
: M. Sc. in Bioinformatics with experience in Proteomics, genomics and structural biology. Knowledge of programming language, pearl and database – HTML, CSS,php and Java script.
Essential qualifications for Research Associate:
MSc/MTech in Bioinformatics with three years experience or Ph.D in Bioinformatics with experience in proteomics, genomics and structural biology. Knowledge of programming language, perl and database
– HTML, CSS, Java script. NGS sequence assembly and analysis and algorithm designing.
Age limit : 35 years maximum (5 year relaxation for SC/ST and women candidates)
Emoluments:
JRF: 16,000 + 30% HRA
.
Res Assoc: Rs22,000 + 30% HRA
The post is purely temporary in nature and is co-terminus with the project. The appointment would be initially for one year and may be extended further upon satisfactory performance.
Interested candidates
should send the duly filled application forms (format in the following page ) so as to reach on or before 20.9.2014 along with all the relevant documents.

More at http://www.iari.res.in/files/JRF_RA-03092014-20140903-135319.pdf